EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 396 (2024) MATEC Web Conf., 396 (2024) 02007 References
Open Access
Issue
MATEC Web Conf.
Volume 396, 2024
8th World Multidisciplinary Civil Engineering - Architecture - Urban Planning Symposium (WMCAUS 2023)
Article Number 02007
Number of page(s) 13
Section Construction Materials
DOI https://doi.org/10.1051/matecconf/202439602007
Published online 24 May 2024
  1. ASTM C1856/M-17, “Standards Practice for Fabricating on Testing Specimens of UHPC”, Annual Book of ASTM Standards. West Conshohocken, PA, 2017. [Google Scholar]
  2. ACAA (American Coal Ash Association), “Fly Ash Use in Concrete Increases Slightly as Overall Coal Ash Recycling Rate Declines”, American Coal Ash Association, Available online: https://acaa-usa.org, (2022). [Google Scholar]
  3. ACI Committee 116, “Cement and Concrete Terminology”, ACI 116R-00, Farmington Hills, Michigan 2000. [Google Scholar]
  4. S. Mousavinezhad, J. M. Garcia, W. K. Toledo, and C. M. Newtson, “A locally available natural pozzolan as a supplementary cementitious material in portland cement concrete”, Buildings, 13 (9), 2364 (2023). https://doi.org/10.3390/buildings13092364 [CrossRef] [Google Scholar]
  5. N. Kabay, M. M. Tufekci, A. B. Kizilkanat, and D. Oktay, “Properties of Concrete with Pumice Powder and Fly Ash as Cement Replacement Materials”, Constr. Build. Mater. 85, 1-8 (2015). [CrossRef] [Google Scholar]
  6. K. M. A. Hossain, “Blended Cement Using Volcanic Ash and Pumice”, Cem. Concr. Res. 33, 1601-1605 (2003). [CrossRef] [Google Scholar]
  7. U. Ramasamy, A. C. Bordelon, and P. J. Tikalsky, “Properties of Different Pumice Grades Blended with Cement”, J. Mater. Civ. Eng. (ASCE), 29(7), (2017). [Google Scholar]
  8. S. Ahmad, K. O. Mohaisen, S. K. Adekunle, S. U. Al-Dulaijan, and M. Maslehuddin, “Influence of admixing natural pozzolan as partial replacement of cement and microsilica in UHPC mixtures”, Constr. Build. Mater. 198, 437-444 (2019). [CrossRef] [Google Scholar]
  9. W. K. Toledo and C. M. Newtson, “Effects of Substrate Texture and Moisture Conditions on Ultra-High Performance Concrete and Silica Fume Concrete Overlay Bond Strengths”, In Proc., 6th World Multidisciplinary Civil EngineeringArchitecture-Urban Planning Symp. (WMCAuS, Prague, 2021), IOP Conf. Ser.: Mater. Sci. Eng. 1203, 032105. [Google Scholar]
  10. ASTM C143/C143M-20, “Standard Test Method for Slump of Hydraulic-Cement Concrete”, Annual Book of ASTM Standards. West Conshohocken, PA, 2020. [Google Scholar]
  11. ASTM C231/C231M-17a, “Standard Test Method for Air Content of Freshly Mixed Concrete by the Pressure Method”, Annual Book of ASTM Standards. West Conshohocken, PA, 2017. [Google Scholar]
  12. ASTM C1611/C1611M-21, “Standard Test Method for Slump Flow of SelfConsolidating Concrete”, Annual Book of ASTM Standards. West Conshohocken, PA, 2021. [Google Scholar]
  13. ASTM C39/C39M-21, “Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens”, Annual Book of ASTM Standards. West Conshohocken, PA, 2021. [Google Scholar]
  14. BS1881, British Standard Testing concrete Part 116, “Method for determination of compressive strength of concrete cubes”, British Standards Institution, London, UK, 1983. [Google Scholar]
  15. ASTM C78/C78M-21, “Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading)”, Annual Book of ASTM Standards. West Conshohocken, PA, 2021. [Google Scholar]
  16. ASTM C1609/C1609M-19a, “Standard Test Method for Flexural Performance of Fiber-Reinforced Concrete (Using Beam with Third-Point Loading”, Annual Book of ASTM Standards. West Conshohocken, PA, 2019. [Google Scholar]
  17. S. Mousavinezhad, G. J. Gonzales, W. K. Toledo, J. M. Garcia, C. M. Newtson, and S. Allena, “A Comprehensive Study on Non-Proprietary Ultra-High-Performance Concrete Containing Supplementary Cementitious Materials”, Materials, 16, 2622 (2023). https://doi.org/10.3390/ma16072622 [CrossRef] [Google Scholar]
  18. S. Mousavinezhad, G. J. Gonzales, W. K. Toledo, J. M. Garcia, and C. M. Newtson, “Mechanical Properties of Ultra-high performance Concrete Containing Natural Pozzolan and Metakaolin”, In Tran-SET 2022, ASCE: San Antonio, TX, USA, 2022, 200-208. https://doi.org/10.1061/9780784484609.022 [CrossRef] [Google Scholar]
  19. C. M. Newtson, S. Mousavinezhad, G. J. Gonzales, W. K. Toledo, and J. M. Garcia, “Alternative Supplementary Cementitious Materials in Ultra-High Performance Concrete”, Final Research Report, Tran-SET project 21CNMSU60, Transportation Consortium of South-Central States, Louisiana State University (2022), Retrieved from https://repository.lsu.edu/transet_pubs/145 [Google Scholar]
  20. S. H. Kosmatka and M. L. Wilson, “Design and Control of Concrete Mixtures. Portland Cement Association”, 15th Edition, (2011). [Google Scholar]
  21. A. M. Zeyad, B. A. Tayeh, and M. O. Yusuf, “Strength and transport characteristics of volcanic pumice powder based high strength concrete”, Constr. Build. Mater. 216, 314-324 (2019). [CrossRef] [Google Scholar]
  22. C. M. Newtson, B. D. Weldon, J. M. Garcia, S. Mousavinezhad, and W. K. Toledo, “Durability of concrete produced with alternative supplementary cementitious material”, Final Research Report, Tran-SET project 20CNMSU40, Transportation Consortium of South-Central States, Louisiana State University (2021), Retrieved from https://digitalcommons.lsu.edu/transetpubs/109 [Google Scholar]
  23. SIA 2052, “Béton Fibré Ultra-Performant (BFUP) - Matériaux, Dimensionnement et Exécution (Ultra-High Performance Fibre Reinforced Cement-Based Composites [UHPFRC]- Construction Material, Dimensioning and Application)”, Swiss Society of Engineers and Architects, Zurich, 2016. [Google Scholar]
  24. CSA A23.1, “Concrete Materials and Methods of Concrete Construction, Annex U - Ultra-High Performance Concrete (UHPC)”, Canadian Standards Association, Mississauga, Ontario, 2019. [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.