EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 393 (2024) MATEC Web Conf., 393 (2024) 03001 References
Open Access
Issue
MATEC Web Conf.
Volume 393, 2024
2nd International Conference on Sustainable Technologies and Advances in Automation, Aerospace and Robotics (STAAAR-2023)
Article Number 03001
Number of page(s) 7
Section Advancements in Aerothermal Analysis
DOI https://doi.org/10.1051/matecconf/202439303001
Published online 13 March 2024
  1. Olumayegun O., Wang M., Kelsall G. Closed-cycle gas turbine for power generation: A state-of-the-art review. Fuel. 180, 694–717 (2016) [CrossRef] [Google Scholar]
  2. Farhat H., Salvini C. Novel Gas Turbine Challenges to Support the Clean Energy Transition. Energies. 15 (15): 5474 (2022) [CrossRef] [Google Scholar]
  3. Vaferi K., Nekahi S., Vajdi M., Moghanlou F.S., Shokouhimehr M., Motallebzadeh A., Sha J., Asl M.S. Heat transfer, thermal stress and failure analyses in a TiB2 gas turbine stator blade. Ceramics International. 45 (15): 19331–4 (2019) [CrossRef] [Google Scholar]
  4. Nekahi S., Vaferi K., Vajdi M., Moghanlou F.S., Asl M.S., Shokouhimehr M. A numerical approach to the heat transfer and thermal stress in a gas turbine stator blade made of HfB2. Ceramics International. 45 (18): 24060–4 (2019) [CrossRef] [Google Scholar]
  5. Vaferi K., Vajdi M., Nekahi S., Nekahi S., Moghanlou F.S., Asl M.S., Mohammadi M. Thermo-mechanical simulation of ultrahigh temperature ceramic composites as alternative materials for gas turbine stator blades. Ceramics International. 47 (1): 567–564 (2021) [CrossRef] [Google Scholar]
  6. Raj, E.F.I., Appadurai, M., Ram, V., Gnaniah, A.M. and Salkuti, S.R., NaturalFibre-Reinforced Composite-Based Micro-Size Wind Turbines: Numerical Analysis and Feasibility Study. Journal of Composites Science, 7 (5), p. 197. (2023) [CrossRef] [Google Scholar]
  7. Singh H.P., Rawat A., Manral A.R., Kumar P. Computational analysis of a gas turbine blade with different materials. Materials Today: Proceedings. 44: 63–69 (2021) [CrossRef] [Google Scholar]
  8. Abid A., Sarowar M.T. Heat Transfer, Thermal Stress and Failure Inspection of a Gas Turbine Compressor Stator Blade Made of Five Different Conventional Superalloys and Ultra-High-Temperature Ceramic Material: A Direct Numerical Investigation. Journal of Failure Analysis and Prevention. 22 (3): 878–874 (2022) [CrossRef] [Google Scholar]
  9. Krishnakanth P.V., Raju G.N., Prasad R.D., Saisrinu R. Structural and thermal analysis of gas turbine blade by using FEM. International Journal of Scientific Research Engineering and Technology. 2 (2): 60–64 (2013) [Google Scholar]
  10. Zhang B., Shirvani K., Taheri M., Beirami K., Wang Y. Effect of TiC and Magnetic Field on Microstructure and Mechanical Properties of IN738 Superalloy Processed by Selective Laser Melting. Journal of Materials Engineering and Performance. 4: 1–6 (2023) [Google Scholar]
  11. Ashokkumar M., Thirumalaikumarasamy D., Sonar T., Deepak S., Vignesh P., Anbarasu M. An overview of cold spray coating in additive manufacturing, component repairing and other engineering applications. Journal of the Mechanical Behavior of Materials. 31 (1): 514–514 (2022) [CrossRef] [Google Scholar]
  12. Gowreesh, R., N. Sreenivasalu Reddy and N.V. Yogananda Murthy. “Convective Heat Transfer Analysis Of An Aero Gas Turbine Blade Using Ansys”, International journal of Mechanics of solids. 4 (1), 55–62 (2009) [Google Scholar]
  13. Mohankumar A., Duraisamy T., Sampathkumar D., Sonar T. Electrochemical corrosion performance of friction stir processed cold spray metal matrix composite coatings on AZ31B magnesium alloy under sodium chloride environment. Surface Topography: Metrology and Properties. 10 (3): 035010 (2022) [CrossRef] [Google Scholar]
  14. Kauthalkar P., Shikarwar M.D., Sharma D.P. Analysis of thermal streses distribution pattern on gas turbine blade using ansys. International journal of Engineering Education and technology. 2(3), (2010) [Google Scholar]
  15. Chowdhury T.S., Mohsin F.T., Tonni M.M., Mita M.N., Ehsan M.M. A Critical Review on Gas Turbine Cooling Performance and Failure Analysis of Turbine Blades. International Journal of Thermofluids. 9:100329 (2023) [CrossRef] [Google Scholar]
  16. Mohankumar A., Duraisamy T., Packkirisamy V., Sampathkumar D. Response Surface Methodology and Mayfly Optimization for Predicting the Properties of Cold-Sprayed AA2024/Al2O3 Coatings on AZ31B Magnesium Alloy. Journal of Materials Engineering and Performance. 2: 1–9 (2023) [Google Scholar]
  17. Ashokkumar M., Thirumalaikumarasamy D., Sonar T., Vignesh P., Deepak S. Optimization of cold spray coating parameters using RSM for reducing the porosity level of AA2024/Al2O3 coating on AZ31B magnesium alloy. International Journal on Interactive Design and Manufacturing (IJIDeM). 15: 1–5 (2023) [Google Scholar]
  18. Ashokkumar M., Thirumalaikumarasamy D., Sonar T., Ivanov M., Deepak S., Rajangam P., Barathiraja R. Effect of post-processing treatments on mechanical performance of cold spray coating-an overview. Journal of the Mechanical Behavior of Materials. 32 (1): 20220271 (2023) [CrossRef] [Google Scholar]
  19. Mohankumar A., Duraisamy T., Sampathkumar D., Ranganathan S., Balachandran G., Kaliyamoorthy M., Mariappan M., Mulugeta L. Optimization of cold spray process inputs to minimize porosity and maximize hardness of metal matrix composite coatings on AZ31B magnesium alloy. Journal of Nanomaterials. 30 (2022) [Google Scholar]
  20. Mohankumar A., Duraisamy T., Chidambaramseshadri R., Pattabi T., Ranganathan S., Kaliyamoorthy M., Balachandran G., Sampathkumar D., Rajendran P.R. Enhancing the corrosion resistance of low pressure cold sprayed metal matrix composite coatings on AZ31B Mg alloy through friction stir processing. Coatings. 12 (2): 135 (2022) [CrossRef] [Google Scholar]
  21. SampathKumar D., Duraisamy T., Pattabi T., Mohankumar A. Static puncture resistance characteristics with various indenter nose shape geometry perforation of shear thickening fluid impregnated polypropylene fabric for soft armour application. Polymers and Polymer Composites. 30, 09673911211063303 (2022) [CrossRef] [Google Scholar]
  22. Seshaiah S., Sampathkumar D., Mariappan M., Mohankumar A., Balachandran G., Kaliyamoorthy M., Rajendran B., Gopal R. Optimization on material removal rate and surface roughness of stainless steel 304 wire cut EDM by response surface methodology. Advances in Materials Science and Engineering. 29 (2022) [Google Scholar]
  23. Mathivanan K., Thirumalaikumarasamy D., Ashokkumar M., Deepak S., Mathanbabu M. Optimization and prediction of AZ91D stellite-6 coated magnesium alloy using Box Behnken design and hybrid deep belief network. Journal of Materials Research and Technology. 15:2953–2969 (2021) [CrossRef] [Google Scholar]
  24. AmrutaPasarkar, S. Balaguru, 2022 ‘Development on Fatigue Testing of Hardfaced Components in Sodium Cooled Fast Reactors’, Engineering Failure Analysis, 137, 106161 (2022) [CrossRef] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.