EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 393 (2024) MATEC Web Conf., 393 (2024) 02001 References
Open Access
Issue
MATEC Web Conf.
Volume 393, 2024
2nd International Conference on Sustainable Technologies and Advances in Automation, Aerospace and Robotics (STAAAR-2023)
Article Number 02001
Number of page(s) 9
Section Design, Development, and Optimization
DOI https://doi.org/10.1051/matecconf/202439302001
Published online 13 March 2024
  1. D. Cole, Survey of US Army Uniforms, Weapons and Accoutrements (2007) [Google Scholar]
  2. D. R. Christman and J. W. Gehring, Analysis of High-Velocity Projectile Penetration Mechanics, J Appl Phys 37, 1579 (1966). https://doi.org/10.1063/1.1708570. [CrossRef] [Google Scholar]
  3. M. J. Forrestal, V. K. Luk, Z. Rosenberg, and N. S. Brar, Penetration of 7075-T651 aluminum targets with ogival-nose rods, Int J Solids Struct 29, 1729 (1992). https://doi.org/10.1016/0020-7683(92)90166-Q. [CrossRef] [Google Scholar]
  4. N. K. Gupta, R. Ansari, and S. K. Gupta, Normal impact of ogive nosed projectiles on thin plates, Int J Impact Eng 25, 641 (2001). https://doi.org/10.1016/S0734-743X(01)00003-3. [CrossRef] [Google Scholar]
  5. M. J. Forrestal, T. Børvik, and T. L. Warren, Perforation of 7075-T651 Aluminum Armor Plates with 7.62 mm APM2 Bullets, Exp Mech 50, 1245 (2010). https://doi.org/10.1007/s11340-009-9328-4. [CrossRef] [Google Scholar]
  6. T. Børvik, S. Dey, and A. H. Clausen, Perforation resistance of five different high- strength steel plates subjected to small-arms projectiles, Int J Impact Eng 36, 948 (2009). https://doi.org/10.1016/i.iįimpeng.2008.12.003. [CrossRef] [Google Scholar]
  7. T. Børvik, O. S. Hopperstad, T. Berstad, and M. Langseth, Perforation of 12mm thick steel plates by 20mm diameter projectiles with flat, hemispherical and conical noses: Part II: numerical simulations, Int J Impact Eng 27, 37 (2002). https://doi.org/10.1016/S0734-743X(01)00035-5. [CrossRef] [Google Scholar]
  8. E. A. Flores-Johnson, M. Saleh, and L. Edwards, Ballistic performance of multilayered metallic plates impacted by a 7.62-mm APM2 projectile, Int J Impact Eng 38, 1022 (2011). https://doi.org/10.1016/i.iíimpeng.2011.08.005. [CrossRef] [Google Scholar]
  9. R. F. Recht and T. W. Ipson, Ballistic Perforation Dynamics, J Appl Mech 30, 384 (1963). https://doi.org/10.1115Z1.3636566. [CrossRef] [Google Scholar]
  10. F. Gálvez, S. Chocron, D. Cendón, and V. Sánchez-Gálvez, Numerical Simulation Of The Tumbling Of Kinetic Energy Projectiles After Impact On Ceramic/metal Armours, in Computational Ballistics II (WIT Press, 2005). [Google Scholar]
  11. P. A. Radchenko, S. P. Batuev, and A. V. Radchenko, Effect of Projectile Rotation on High-Velocity Impact Fracture, Physical Mesomechanics 25, 119 (2022). https://doi.org/10.1134/S1029959922020035. [CrossRef] [Google Scholar]
  12. V. Pranay and S. Panigrahi, Effects of spinning on residual velocity of ogive-nosed projectile undergoing ordnance velocity impact, Proc Inst Mech Eng C J Mech Eng Sci 236, 1685 (2022). https://doi.org/10.1177/09544062211020030. [CrossRef] [Google Scholar]
  13. V. Pranay and S.K. Panigrahi, Effects of spinning on residual velocity of projectile for normal and oblique impact, in 13th International High Energy Materials Conference and Exhibits, TBRL (Chandigarh, 2022) [Google Scholar]
  14. V. Pranay and S. K. Panigrahi, Design and development of new spiral head projectiles undergoing ballistics impact, International Journal of Structural Integrity 13, 490 (2022). https://doi.org/10.1108/IJSI-01-2022-0008. [CrossRef] [Google Scholar]
  15. S. Nandimandalam and B. Sethuraman, Mechanical and Tribological Behaviour of Al 7075 Hybrid MNC’s using Stir Casting Method, International Journal of Mechanical and Production Engineering Research and Development, 10, 391 (2020). https://doi.org/10.24247/iimperdiun202036. [Google Scholar]
  16. N. K. Singh and B. Sethuraman, Development and Characterization of Aluminium AA7075 Hybrid Composite Foams (AHCFs) Using SiC and TiB2 Reinforcement, International Journal of Metalcasting, 18, 212 (2024). https://doi.org/10.1007/s40962-023-01009-6. [CrossRef] [Google Scholar]
  17. N. K. Singh and S. Balaguru, Fabrication and Mechanical Characterization of Al-Zn- Cu Alloy /SiC/TiB2 Hybrid Reinforced Metal Matrix Composite using Top Loaded Bottom Pouring Stir Casting Method, Silicon, 16, 45 (2024). https://doi.org/10.1007/s12633-023-02648-4. [CrossRef] [Google Scholar]
  18. N. K. Singh and S. Balaguru, Experimental Analysis of Foaming Agent Contents in AA7075/SİC Closed Cell Aluminum Composite Foam, In: Sethuraman, B., Jain, P., Gupta, M. (eds) Recent Advances in Mechanical Engineering. STAAAR 2022. Lecture Notes in Mechanical Engineering. Springer, Singapore. https://doi.org/10.1007/978-981-99-2349-651. [Google Scholar]
  19. K. O. Pedersen, T. Børvik, and O. S. Hopperstad, Fracture mechanisms of aluminium alloy AA7075-T651 under various loading conditions, Mater Des 32, 97 (2011). https://doi.org/10.1016/j.matdes.2010.06.029. [CrossRef] [Google Scholar]
  20. T. Børvik, O. S. Hopperstad, and K. O. Pedersen, Quasi-brittle fracture during structural impact of AA7075-T651 aluminium plates, Int J Impact Eng 37, 537 (2010). https://doi.org/10.1016/j.ijimpeng.2009.11.001. [CrossRef] [Google Scholar]
  21. K. Senthil and M. A. Iqbal, Prediction of superior target layer configuration of armour steel, mild steel and aluminium 7075-T651 alloy against 7.62 AP projectile, Structures 29, 2106 (2021). https://doi.org/10.1016/j.istruc.2020.06.010. [CrossRef] [Google Scholar]
  22. G. R. Johnson and W. H. Cook, A Constitutive Model and Data for Metals Subjected to Large Strains, High Strain Rates, and High Temperatures, in Proceedings 7th International Symposium on Ballistics (The Hague, 19-27 April, 1983), pp. 541–547. [Google Scholar]
  23. G. R. Johnson and W. H. Cook, Fracture characteristics of three metals subjected to various strains, strain rates, temperatures and pressures, Eng Fract Mech 21, 31 (1985). https://doi.org/10.1016/0013-7944(85)90052-9. [CrossRef] [Google Scholar]
  24. K. Senthil, M. A. Iqbal, P. S. Chandel, and N. K. Gupta, Study of the constitutive behavior of 7075-T651 aluminum alloy, Int J Impact Eng 108, 171 (2017). https://doi.org/10.1016/j.ijimpeng.2017.05.002. [CrossRef] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.