Open Access
Issue |
MATEC Web Conf.
Volume 393, 2024
2nd International Conference on Sustainable Technologies and Advances in Automation, Aerospace and Robotics (STAAAR-2023)
|
|
---|---|---|
Article Number | 01015 | |
Number of page(s) | 8 | |
Section | Materials Science and Manufacturing Processes | |
DOI | https://doi.org/10.1051/matecconf/202439301015 | |
Published online | 13 March 2024 |
- Divya Chandra, Nadhi Ram Chauhan. Hardness and Roughness Evaluation of Developed Al Metal Matrix Composites using Stir Casting Method. Materials Today Proceedings, Volume 25, Part 4, pages 872–876, (2020) [CrossRef] [Google Scholar]
- V. Bhuvaneswaria, L. Rajesjhkumar, D. Balaji, R. Saravanakumar. Study of Mechanical and Tribological Properties of Bio-Ceramics reinforced Al Alloy Composites. Solid State Technology. Vol 63, No. 5 (2020) [Google Scholar]
- Pankaj R. Jadhav, B.R. Sridhar, Madeva Nagared, Jayasheel L. Harti. Mechanical Behaviour and fractography of graphite and boron carbide particulates reinforced A356 alloy hybrid metal matrix composites. Advanced Composites Hybrid Materials 3, 114–119 (2020) [CrossRef] [Google Scholar]
- Seyed Abdolkarim Saijadi, M. Torabi Pairizi. Comparison of microstructure and mechanical properties of A356 aluminium alloy / Al2O3 composites fabricated stir and campo-casting process. Materials & Design. 34, 106–111, (2012) [CrossRef] [Google Scholar]
- T.P.D. Rajan, R. M. Pillai, B. C. Pai, K. G. Satyanarayana, P. K. Rohatgi. Fabrication and Characterization of Al - 7Si - 0.35 Mg / Fly ash Metal Matrix Composites Processed by Different Stir Casting Routes. Composite Science and Technology. 67 (15-16), 3369–3377, 2007 [CrossRef] [Google Scholar]
- Malek Ali. Review of Stir Casting Technique and Technical Challenges for Ceramic Reinforcement Particulate Aluminium Matrix Composites. Journal of Silicate Based and Composite Materials. Volume 72, Issue 6, May (2020). [Google Scholar]
- Susanta K.P., Subhranshu C., Amitava B.M., Debdulal D. 2016 A simple stir casting technique for the preparation of in situ Fe-aluminides reinforced Al-matrix composites. Perspectives in Science. Volume 8, 529–532, (2016) [CrossRef] [Google Scholar]
- Fathy A., El-Kady O., Moustafa M.M. Mohammed. Effect of iron addition on microstructure, mechanical and magnetic properties of Al-matrix composite produced by powder metallurgy route Trans. Nonferrous Met. Soc. China 25, 46–53, (2015) [CrossRef] [Google Scholar]
- Subramanya R.P., Arun K.S., Mervin A.H., Shrikantha S.R. Microstructure and mechanical properties of rutile-reinforced AA6061 matrix composites produced via stir casting process Trans. Nonferrous Met. Soc. China, 29 2229–2236, (2019) [CrossRef] [Google Scholar]
- Sivananthan S., Ravi K., Samson Jerold Samuel C. Effect of SiC particles reinforcement on mechanical properties of aluminium 6061 alloy processed using stir casting route Materials Today: Proceedings. 21, 968–970, (2020) [Google Scholar]
- Nagendra K.M., Manish M., Srivastava A.K., Dwivedi S.P., Kumar, A., Chauhan, S. Investigation of mechanical properties of Al 6061/SiC composite prepared through stir casting technique Materials Today: Proceedings 25 755–758, (2020) [Google Scholar]
- Sarkari Khorrami M., Samadi S., Janghorban Z., Movahedi M. In-situ aluminum matrix composite produced by friction stir processing using Fe particles Mater Sci Eng A. 641, 380–390, (2015) [Google Scholar]
- Wang M.M. and Apelian D., Aluminium die casting alloys: alloy composition, microstructure, and properties-performance relationships Int. Mater. Rev. 40 225–252, (1995) [Google Scholar]
- Mikhaylov V.I., Maslennikova T.P., Ugolkov V.L., Krivoshapkin P.V. Hydrothermal synthesis, characterization and sorption properties of Al/Fe oxide-oxyhydroxide composite powders. Advanced Powder Technology. 27, 756–764, (2016) [CrossRef] [Google Scholar]
- Yang X., Rujuan S., Ni S., Song M., Xiao, D. Fabrication, microstructure and mechanical properties of Al-Fe intermetallic particle reinforced Al-based composites. Journal of Alloys and Compounds. 618, 537–544, (2015) [Google Scholar]
- A.V. Pozdniakov, A. Lotfy, A. Qadir, E. Shalaby, M.G. Khomutov, A.Y. Churyumov, V.S. Zolotorevskiy. Development of Al-5Cu/B4C composites with low coefficient of thermal expansion for automotive application. Mater. Sci. Eng., A., 688 pp. 1–8, 10.1016/j.msea.2017.01.075, (2017) [CrossRef] [Google Scholar]
- H. sheng Chen, W. xian Wang, H. Hui Nie, J. Zhou, Y. li Li, P. Zhang. Microstructure and mechanical properties of B4C/6061Al laminar composites fabricated by power metallurgy. Vacuum, 143, pp. 363–37010. DOI: 1016/j.vacuum.2017.06.009, (2017) [CrossRef] [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.