EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 392 (2024) MATEC Web Conf., 392 (2024) 01020 References
Open Access
Issue
MATEC Web Conf.
Volume 392, 2024
International Conference on Multidisciplinary Research and Sustainable Development (ICMED 2024)
Article Number 01020
Number of page(s) 14
DOI https://doi.org/10.1051/matecconf/202439201020
Published online 18 March 2024
  1. F.Q. Tian, N.K. Li, J.Z. Cui, Development process and direction of strengthening and toughening of ultra-high strength aluminum alloy [J], Light Alloy Process. Technol. 33 (12) (2005) 1–9. [Google Scholar]
  2. A. Seshappa, B. Anjaneya Prasad Characterization and Investigation of Mechanical Properties of Aluminium Hybrid Nano-composites: Novel Approach of Utilizing Silicon Carbide and Waste Particles to Reduce Cost of Material. ISSN Silicon, 1876-990X, 2020, https://doi.org/10.1007/s12633-020-00748-z [Google Scholar]
  3. B. Zhou, S. Lu, K.-l. Xu, C. Xu, Z.-Y. Wang, B.-J. Wsang, Hot cracking tendency test and simulation of 7075 semi-solid aluminium alloy [J], Trans. Nonferrous Metals Soc. China 30 (2) (2020) 318–332. [CrossRef] [Google Scholar]
  4. J. Ren, R.C. Wang, Y. Feng, C.Q. Peng, Z.Y. Cai, Microstructure evolution and mechanical properties of an ultrahigh strength Al Zn Mg Cu Zr Sc (7075) alloy processed by modified powder hot extrusion with post aging [J], Vacuum 161 (2019) 434–442. [CrossRef] [Google Scholar]
  5. J.M. García-Infanta, A.P. Zhilyaev, A. Sharafutdinov, O.A. Ruano, F. Carreño, An evidence of high strain rate superplasticity at intermediate homologous temperatures in an Al Zn Mg Cu alloy processed by high-pressure torsion [J], J. Alloy. Compd. 473 (1-2) (2009) 163–166. [CrossRef] [Google Scholar]
  6. Z. Horita, T. Fujinami, M. Nemoto, T.G. Langdon, Improvement of mechanical properties for Al alloys using equal-channel angular pressing [J], J. Mater. Process. Technol. 117 (3) (2001) 288–292. [CrossRef] [Google Scholar]
  7. A. Javdani, A. H. Daeisorkhabi, Microstructural and mechanical behavior of blended powder semisolid formed Al7075/B 4 C composites under different experimental conditions, Trans. Nonferrous Metals Soc. China 28 (7) (2018) 1298–1310. [CrossRef] [Google Scholar]
  8. J. Hashim, L. Looney, M.S.J. Hashmi, Particle distribution in cast metal matrix composites – part II, J. Mater. Process. Technol. 123 (2) (2002) 258–263, https://doi.org/10.1016/S0924-0136(02)00099-7. [CrossRef] [Google Scholar]
  9. S.K. Pradhan, S. Chatterjee, A.B. Mallick, D. Das, A simple stir casting technique for the preparation of in situ Fe-aluminides reinforced Al-matrix composites, Perspect. Sci. 8 (2016) 529–532, https://doi.org/10.1016/j.pisc.2016.06.011. [CrossRef] [Google Scholar]
  10. E. Bayraktar, D. Katundi, Development of A New Aluminium Matrix Composite Reinforced with Iron Oxide (Fe3O4)Journal of Achievements in Materials and Manufacturing Engineering. [Google Scholar]
  11. J. Liu, Y.-S. Cheng, S.W.N. Chan, D. Sung, Microstructure and mechanical properties of 7075 aluminum alloy during complex this extrusion, Trans. Nonferrous Metals Soc. China 30 (12) (2020) 3173–3182, https://doi.org/ 10.1016/S1003-6326(20)65452-8. [CrossRef] [Google Scholar]
  12. C.M. Anand Partheeban, M. Rajendran, S.C. Vettivel, S. Suresh, N.S.V. Moorthi, Mechanical behavior and failure analysis using online acoustic emission on nanographite reinforced Al6061–10TiB2 hybrid composite using powder metallurgy, Mater. Sci. Eng.: A 632 (2015) 1–13. [CrossRef] [Google Scholar]
  13. Trishul M.A, Virupaxayya Hiremath, Shreyas P, Production and Testing of Al– Fe2O3 Particulate Composite. Journal of Achievements In Materials And Manufacturing Engineering. [Google Scholar]
  14. Essam R. I. Mahmoud and Mahmoud M. Tash, Characterization of Aluminum-Based-Surface Matrix Composites with Iron and Iron Oxide Fabricated by Friction Stir Processing. Journal of Achievements in Materials And Manufacturing Engineering. [Google Scholar]
  15. EminBayraktar, FayzaAyari, Ming Jen Tan, Ayse Tosun-Bayraktar, And DHURATA KATUNDI, Manufacturing Of Aluminum Matrix Composites Reinforced With Iron Oxide (Fe3O4) Nanoparticles: Microstructural And Mechanical Properties. Journal Of Achievements In Materials And Manufacturing Engineering. [Google Scholar]
  16. F. Ayari A, B, D. Katundi B, And E. Bayraktar B, Damage Of Aluminium Matrix Composite Reinforced With Iron Oxide (Fe3O4): Experimental And Numerical Study. Journal Of Achievements In Materials And Manufacturing Engineering. [Google Scholar]
  17. Yi Wang1,2, XiaoLan Song3, Wei Jiang1, Guo-Dong Deng1, Xiao-De Guo1, Hong-Ying LIU1, FengSheng LI1, Mechanism For Thermite Reactions Of Aluminum/Iron-Oxide Nanocomposites Based On Residue Analysis.Journal Of Achievements In Materials And Manufacturing Engineering. [Google Scholar]
  18. Emin Bayraktar, FayzaAyari, Ming Jen Tan, AyseTosun-Bayraktar, And Dhurata Katundi, Manufacturing Of Aluminium Matrix Composites Reinforced With Iron Oxide (Fe3O4) Nanoparticles: Microstructure And Mechanical Properties. Journal Of Achievements In Materials And Manufacturing Engineering. [Google Scholar]
  19. Palani swamy Shanmugha sundaram1, Of Iron Oxide On Tribological Behaviour Of Al– Si Alloy – Iron Oxide Composites – Taguchi Approach. Journal Of Achievements In Materials And Manufacturing Engineering. [Google Scholar]
  20. E. Bayraktar, M.-H. Robert, I. Miskioglu, And A. Tosun Bayraktar, Mechanical And Tribological Performance Of Aluminium Matrix, Composite Reinforced With Nano Iron Oxide (Fe3O4). Journal Of Achievements In Materials And Manufacturing Engineering. [Google Scholar]
  21. Kumar GP, Keshavamurthy R, Tambrallimath V, Biswas R, Andhale YS (2018) Mechanical Properties of Al7075-SiC-TiO2 Hybrid Metal Matrix Composite. In AdvManuf and Mater Sci 1:301-307 [Google Scholar]
  22. Sambathkumar M, Navaneethakrishnan P, Ponappa KS, Sasikumar KS (2017) Mechanical and corrosion behavior of Al7075 (hybrid) metal matrix composites by two step stir casting process. Latin Amer J of Solids and Struct 14:243-55 [CrossRef] [Google Scholar]
  23. Murali M, Sambathkumar M, Saravanan MS (2014) Micro structural and mechanical properties of AA 7075/TiO2 in situ composites. Univer J of Mater Sci 2:49-53 [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.