EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 388 (2023) MATEC Web Conf., 388 (2023) 10001 References
Open Access
Issue
MATEC Web Conf.
Volume 388, 2023
2023 RAPDASA-RobMech-PRASA-AMI Conference Advanced Manufacturing Beyond Borders - The 24th Annual International RAPDASA Conference joined by RobMech, PRASA and AMI, hosted by CSIR and CUT
Article Number 10001
Number of page(s) 14
Section AM Post Processing & Qualification
DOI https://doi.org/10.1051/matecconf/202338810001
Published online 15 December 2023
  1. G.J. Booysen, A.F. van der Merwe, D.J. de Beer, SAJIE, 30, 3 (2019) [CrossRef] [Google Scholar]
  2. G.J. Booysen, A. van der Merwe, D. de Beer, C. van den Heever, J. Els, Developing a Patient-Specific Maxillary Implant Using Additive Manufacturing and Design, in Proceedings of the International Conference on Competitive Manufacturing, COMA’16, 27-29 January 2016, Stellenbosch University, South Africa (2016) [Google Scholar]
  3. N. Alasseri, A. Alasraj, PMC. J, 42, 1 (2020) [Google Scholar]
  4. W.B. du Preez JOM, 71, 2 (2019) [Google Scholar]
  5. W. B. du Preez, D. J. De Beer, G.J. Booysen, MRS Adv, 5 (2020) [Google Scholar]
  6. W.B. du Preez, G.J. Booysen, MATEC Web Conf. 321, 03012 (2020) [CrossRef] [EDP Sciences] [Google Scholar]
  7. ISO13485, Medical devices - Quality management systems -requirements for regulatory purposes, ISO International, Switzerland (2016) [Google Scholar]
  8. ISO14971, Medical devices - Application of risk management to medical devices, ISO International, Switzerland (2012) [Google Scholar]
  9. M. Javaid, A. Haleem, Alexandria J. Med, 54, 4 (2018) [Google Scholar]
  10. A. Yagiz, S. C. Dogru, M. Uzel, H. Kocaelli, Y. Z. Arslan, E. Cansiz. Application of 3D Printing in Biomedical Engineering, (Design of Patient-Specific Maxillofacial Implants and Guides, Springer, 2021) [Google Scholar]
  11. ASTMF2792-12A, Standard Terminology for Additive Manufacturing Technologies. ASTM International, West Conshohocken, PA, (2012) [Google Scholar]
  12. S. Ambriz, J. Coronel, B. Zinniel, R. Schloesser, C. Kim, M. Perez, D. Espalin, R.B. Wicker, J. Manuf. Syst, 45 (2017) [CrossRef] [Google Scholar]
  13. A. Ellis, A.F. van der Merwe, Powder Management Strategy for Additive Manufacturing, in Proceedings of the Rapid Product Development Association of South Africa, RAPDASA, 5-8 November 2019, CUT Bloemfontein, South Africa (2019) [Google Scholar]
  14. Y. Lu. Error Characterisation of EOS M280 Additive Manufacturing Machine, M. Eng. Thesis, Pennsylvania State University, Pennsylvania (2017) [Google Scholar]
  15. M.A. Ridolfi, P. Folgarait, V. Battaglia, T. Vela, D. Corapi, A.D. Schino. Procedia Struct. Integr, 24, (2019) [Google Scholar]
  16. U. Urbas, R. Vrabic, N. Vukasinovic, Procedia CIRP, 81 (2019) [Google Scholar]
  17. C. Liu, L.L. Roux, J. Manuf. Syst, 62 (2022) [Google Scholar]
  18. A. Muiruri, M. Maringa, W. du Preez, L. Masu. MDPI, 10, 5 (2020) [Google Scholar]
  19. P. T. Mai, T. Bormann, R. Sonntag, J.P. Kretzer. J. Gibmeier. MDPI, 13, 21 (2020) [Google Scholar]
  20. L.W. Koester, H. Taheri, T.A. Bigelow, P.C Collins, L. J. Bond. Mater Eval. 76, 4 (2018) [Google Scholar]
  21. F. F. Fashanu, D. J. Marcellin-Little, B.S. Linke. Review of surface finishing of Additively Manufactured Metal Implants, in Proceedings of the ASME 2020 15th International Manufacturing Science and Engineering Conference, 3 September, Virtual, Online (2020) [Google Scholar]
  22. P. Aivaliotis, K. Georgoulias, Z. Arkouli, S. Makris. Procedia CIRP, 81 (2019) [Google Scholar]
  23. D. Hartmann, H. Van der Auweraer, J. Mater, Sci. 5 (2020) [Google Scholar]
  24. L. E. Garza, G. Pantoja, P. Ramirez, H. Ramirez, N. Rodriguez, E. Gonzalez, R. Quintal, J.A. Perez, Procedia Comput. Sci. 25 (2013) [Google Scholar]
  25. Y. Lu, P. Witherell, A. Donmez, A collaborative data management system for additive manufacturing. in Proceedings of the International Conference in Design Engineering Technical, ASME, 6-9 August 2017, Cleveland, Ohio, USA (2017) [Google Scholar]
  26. A. E. Uva, M. Fiorentino, G. Monno, Augmented Reality Integration in Product Development, in Proceedings of the International Conference in Innovative Methods in Product Design, June 15 - 17, Venice, Italy (2011) [Google Scholar]
  27. Jendamark Automation ODIN Manufacturing. https://odinmanufacturing.io/about-jendamark/. [Accesses 10 August 2023] [Google Scholar]
  28. M. Gattullo, G. W. Scurati, M. Fiorentino, A. E. Uva, F. Ferrise, M. Bordegoni. Robot Comput Integr Manuf. 56 (2019) [Google Scholar]
  29. T. Kuhn, Comput. Linguist. 40, 1 (2014) [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.