EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 388 (2023) MATEC Web Conf., 388 (2023) 08007 References
Open Access
Issue
MATEC Web Conf.
Volume 388, 2023
2023 RAPDASA-RobMech-PRASA-AMI Conference Advanced Manufacturing Beyond Borders - The 24th Annual International RAPDASA Conference joined by RobMech, PRASA and AMI, hosted by CSIR and CUT
Article Number 08007
Number of page(s) 15
Section AM Material and Part Characterisation
DOI https://doi.org/10.1051/matecconf/202338808007
Published online 15 December 2023
  1. P. Herrera, E. Hernandez-Nava, R. Thornton and T. Slatter. Abrasive wear resistance of Ti-6AL-4V obtained by the conventional manufacturing process and by electron beam melting (EBM), (2023). [Google Scholar]
  2. E.T. Akinlabi, I. Mathoho, M.P. Mubiayi, C. Mbohwa and M.E. Makhatha, Effect of process parameters on surface roughness during dry and flood milling of Ti-6A- l4V, 2018 IEEE 9th International Conference on Mechanical and Intelligent Manufacturing Technologies (ICMIMT), Cape Town, South Africa, pp. 144–147, (2018). [CrossRef] [Google Scholar]
  3. J. Dai, J. Zhu, C. Chen and Weng, F. High temperature oxidation behavior and research status of modifications on improving high temperature oxidation resistance of titanium alloys and titanium aluminides: A review. Journal of Alloys and Compounds, (2016). [Google Scholar]
  4. Qian, H. Xu and Q. Zhong. The influence of process parameters on corrosion behaviour of Ti6Al4V alloy processed by selective laser melting. Journal of Laser Applications, (2020). [Google Scholar]
  5. L. Hee, A.C. Jamali, S.S Bendavid, A. Martin, P.J. Kong and Y. Zhao. Corrosion behaviour and adhesion properties of sputtered tantalum coating on Ti6Al4V substrate. Surface and Coatings Technology, 307, pp. 666–67, (2016). [CrossRef] [Google Scholar]
  6. H. Asgar, K.M. Deen, Z.U. Rahman, U.H. Shah, M.A. Raza, and W. Haider. Functionalized graphene oxide coating on Ti6Al4V alloy for improved biocompatibility and corrosion resistance. Materials Science and Engineering, 94, pp. 920–928, (2016). [Google Scholar]
  7. N. Jin, Z. Yan, Y. Wang, H. Cheng, and H. Zhang. Effects of heat treatment on microstructure and mechanical properties of selective laser melted Ti-6Al-4V lattice materials. International Journal of Mechanical Sciences, 190, pp. 106042, (2021) [CrossRef] [Google Scholar]
  8. D. Pan, S. Li, L. Liu, X. Zhang, B. Li, B. Chen, M. Chu, X. Hou, Z. Sun, J. Umeda and K. Kondoh, K. Enhanced strength and ductility of nano-TiBw-reinforced titanium matrix composites fabricated by electron beam powder bed fusion using Ti6Al4V-TiBw composite powder. Additive Manufacturing, 50, p.102519, (2022). [CrossRef] [Google Scholar]
  9. X. Liu, S. Chen, J. Zhang, G. Yang, Y. Zhang, T. Wang and J. Lei. Enhancement of the electrochemical corrosion resistance of Ti6Al4V alloy reinforced by nano- and micro-TiC particles through directed energy deposition. Corrosion Science, pp. 111343, (2023) [CrossRef] [Google Scholar]
  10. L.J. Huang, L. Geng, and H.X. Peng. In situ (TiBw+ TiCp)/Ti6Al4V composites with a network reinforcement distribution. Materials Science and Engineering, (2010). [Google Scholar]
  11. H. Chen, D. Gu, D. Dai, C. Ma and M. Xia. Microstructure and composition homogeneity, tensile property, and underlying thermal physical mechanism of selective laser melting tool steel parts. Materials Science and Engineering, (2017). [Google Scholar]
  12. S.A.S.M. Lampman. Wrought titanium and titanium alloys. Properties and Selection: Nonferrous Alloys and Special-Purpose Materials, (1990). [Google Scholar]
  13. M. Bai, R. Namus, Y. Xu, D. Guan, M.W. Rainforth and B.J. Inkson. In-situ Ti- 6Al-4V/TiC composites synthesized by reactive spark plasma sintering: Processing, microstructure, and dry sliding wear behaviour, (2019). [Google Scholar]
  14. T. Niendorf, S. Leuders, A. Riemer, H.A. Richard, T. Tröster and D. Schwarze. Highly anisotropic steel processed by selective laser melting. Metallurgical and materials transactions B, (2013). [Google Scholar]
  15. Y. Chong, T. Bhattacharjee and N. Tsuji. Bi-lamellar microstructure in Ti-6Al-4V: Microstructure evolution and mechanical properties. Materials Science and Engineering, (2019). [Google Scholar]
  16. S.H. Ahn, J.H. Lee, J.G. Kim and J, G. Han. Localized corrosion mechanisms of the multilayered coatings related to growth defects. Surface and Coatings, (2004). [Google Scholar]
  17. E.T. Akinlabi, I. Mathoho and M.P. Mubiayi, Corrosion behaviour and microhardness during dry and flood milling of Ti-6Al-4V alloy. Key Engineering Materials, 796, pp. 91–96, (2019) [CrossRef] [Google Scholar]
  18. K. Park, B.Y. Chang and S. Hwang, Correlation between tafel analysis and electrochemical impedance spectroscopy by prediction of amperometric response from EIS. Acs Omega, 4(21), pp. 19307–19313, (2019). [CrossRef] [Google Scholar]
  19. S. Frankel, Fundamentals of corrosion kinetics. Active protective coatings: new- generation coatings for metals, (2016). [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.