EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 388 (2023) MATEC Web Conf., 388 (2023) 08005 References
Open Access
Issue
MATEC Web Conf.
Volume 388, 2023
2023 RAPDASA-RobMech-PRASA-AMI Conference Advanced Manufacturing Beyond Borders - The 24th Annual International RAPDASA Conference joined by RobMech, PRASA and AMI, hosted by CSIR and CUT
Article Number 08005
Number of page(s) 13
Section AM Material and Part Characterisation
DOI https://doi.org/10.1051/matecconf/202338808005
Published online 15 December 2023
  1. I. Yadroitsev, I. Yadroitsava, A. Du Plessis, E. Macdonald, Fundamentals of Laser Powder Bed Fusion of Metals (2021), doi: 20.1016/j.aime.2022.100070 [Google Scholar]
  2. M. Benedetti, A. du Plessis, R. O. Ritchie, M. Dallago, S. M. J. Razavi, and F. Berto, “Architected cellular materials: A review on their mechanical properties towards fatigue-tolerant design and fabrication,” Materials Science and Engineering R: Reports, 144 (2021), doi: 10.1016/j.mser.2021.100606. [CrossRef] [Google Scholar]
  3. A. du Plessis, N. Razavi, M. Benedetti, S. Murchio, M. Leary, M. Watson, D. Bhate, F. Berto, “Properties and applications of additively manufactured metallic cellular materials: A review,” Progress in Materials Science, 125. (2022), doi: 10.1016/j.pmatsci.2021.100918. [CrossRef] [Google Scholar]
  4. D. Mahmoud, K. S. Al-Rubaie, and M. A. Elbestawi, “The influence of selective laser melting defects on the fatigue properties of Ti6Al4V porosity graded gyroids for bone implants,” Int J Mech Sci, 193 (2021), doi: 10.1016/j.ijmecsci.2020.106180. [CrossRef] [Google Scholar]
  5. H. Gong, K. Rafi, H. Gu, G. D. J. Ram, T. Starr, and B. Stucker, “Influence of defects on mechanical properties of Ti-6Al-4V components produced by selective laser melting and electron beam melting,” Mater Des, 86, pp. 545–554 (2015), doi: 10.1016/j.matdes.2015.07.147. [CrossRef] [Google Scholar]
  6. G. Kasperovich, J. Haubrich, J. Gussone, and G. Requena, “Correlation between porosity and processing parameters in TiAl6V4 produced by selective laser melting,” Mater Des, 105, pp. 160–170 (2016) doi: 10.1016/j.matdes.2016.05.070. [CrossRef] [Google Scholar]
  7. D. S. Egan and D. P. Dowling, “Influence of process parameters on the correlation between in-situ process monitoring data and the mechanical properties of Ti-6Al-4V non-stochastic cellular structures,” Addit Manuf, 30 (2019), doi: 10.1016/j.addma.2019.100890. [Google Scholar]
  8. J. C. Fox, S. P. Moylan, and B. M. Lane, “Effect of Process Parameters on the Surface Roughness of Overhanging Structures in Laser Powder Bed Fusion Additive Manufacturing,” in Procedia CIRP, Elsevier B.V (2016), doi: 10.1016/j.procir.2016.02.347. [Google Scholar]
  9. A. Du Plessis, I. Yadroitsev, I. Yadroitsava, and S. G. Le Roux, “X-Ray Microcomputed Tomography in Additive Manufacturing: A Review of the Current Technology and Applications,” 3D Print Addit Manuf, 5, 3, pp. 227–247 (2018), doi: 10.1089/3dp.2018.0060. [CrossRef] [Google Scholar]
  10. C. Yan, L. Hao, A. Hussein, and D. Raymont, “Evaluations of cellular lattice structures manufactured using selective laser melting,” Int J Mach Tools Manuf, 62, pp. 32–38 (2012), doi: 10.1016/j.ijmachtools.2012.06.002. [CrossRef] [Google Scholar]
  11. A. du Plessis, “Effects of process parameters on porosity in laser powder bed fusion revealed by X-ray tomography,” Addit Manuf, 30 (2019), doi: 10.1016/j.addma.2019.100871. [Google Scholar]
  12. A. du Plessis, S. M. J. Razavi, and F. Berto, “The effects of microporosity in struts of gyroid lattice structures produced by laser powder bed fusion,” Mater Des, 194, ( 2020), doi: 10.1016/j.matdes.2020.108899. [CrossRef] [Google Scholar]
  13. A. du Plessis, S. G. le Roux, and A. Guelpa, “The CT Scanner Facility at Stellenbosch University: An open access X-ray computed tomography laboratory,” Nucl Instrum Methods Phys Res B, 384, pp. 42–49, (2016), doi: 10.1016/j.nimb.2016.08.005. [CrossRef] [Google Scholar]
  14. Y. L. Tee, J. R. Black, and P. Tran, “Virtual characterisation of porcupine quills using X-ray micro-CT”, Virtual Phys Prototyp, 18, 1, 2023, doi: 10.1080/17452759.2022.2126377. [Google Scholar]
  15. N. Otsu, "A Threshold Selection Method from Gray-Level Histograms," in IEEE Transactions on Systems, Man, and Cybernetics, 9, 1, pp. 62–66, Jan. 1979, doi: 10.1109/TSMC.1979.4310076. [CrossRef] [Google Scholar]
  16. R. N. Oosterbeek and J. R. T. Jeffers, “StrutSurf: A tool for analysis of strut morphology and surface roughness in additively manufactured lattices,” SoftwareX, 18 (2022), doi: 10.1016/j.softx.2022.101043. [CrossRef] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.