Open Access
Issue
MATEC Web Conf.
Volume 388, 2023
2023 RAPDASA-RobMech-PRASA-AMI Conference Advanced Manufacturing Beyond Borders - The 24th Annual International RAPDASA Conference joined by RobMech, PRASA and AMI, hosted by CSIR and CUT
Article Number 08003
Number of page(s) 11
Section AM Material and Part Characterisation
DOI https://doi.org/10.1051/matecconf/202338808003
Published online 15 December 2023
  1. C. Leyens and M. Peters. Titanium and Titanium Alloys, Weinheim: Wiley-vch. (2003). [CrossRef] [Google Scholar]
  2. I. Inagaki, T. Takechi, Y. Shirai, N. Ariyasu, Application and features of titanium for the aerospace industry. Nippon Steel & Sumitomo Metal Technical Report, Number 106,. pp. 22–27, (2014). [Google Scholar]
  3. D. Mantovani. Shape memory alloys: Properties and biomedical applications. JOM, 52, pp. 36–44, (2000). [CrossRef] [Google Scholar]
  4. J.L. Xu, S.C. Tao, L.Z. Bao, J.M. Luo, Y.F. Zheng. Effects of Mo contents on the microstructure, properties and cytocompatibility of the microwave sintered porous TiMo alloys. Mat. Sci. Eng.: C, 97. pp. 156–165, (2019). [CrossRef] [Google Scholar]
  5. V.S.A. Challa, S. Mali, R.D.K. Misra, Reduced toxicity and superior cellular response of preosteoblasts to Ti‐6Al‐7Nb alloy and comparison with Ti‐6Al‐4V. J. Biomed. Mat. Res. Part A, 101, 7, pp. 2083–2089, (2013). [Google Scholar]
  6. N. Soro, H. Attar, E. Brodie, M. Veidt, A. Molotnikov, M.S. Dargusch, Evaluation of the mechanical compatibility of additively manufactured porous Ti-25Ta alloy for load-bearing implant applications. J. Mech. Behav. Biomedi. Mat., 97, pp. 149–158, (2019). [CrossRef] [Google Scholar]
  7. P. Stenlund, O. Omar, U. Brohede, S. Norgren, B. Norlindh, A. Johansson, J. Lausmaa, P. Thomsen, A. Palmquist, Bone response to a novel Ti-Ta-Nb-Zr alloy. Acta Biomat., 20, pp. 165–175, (2015). [CrossRef] [Google Scholar]
  8. E. Zhang, F. Li, H. Wang, J. Liu, C. Wang, M. Li, K. Yang, A new antibacterial titanium-copper sintered alloy: preparation and antibacterial property. Mat. Sci. Eng. C, 33, 7, pp. 4280–4287, (2013). [CrossRef] [Google Scholar]
  9. J. Liu, F. Li, C. Liu, H. Wang, B. Ren, K. Yang, E. Zhang, Effect of Cu content on the antibacterial activity of titanium-copper sintered alloys. Mat. Sci.Eng. C, 35, pp. 392400, (2014). [Google Scholar]
  10. L. Spotose. Identifying Ti-Cu-based alloys for biomedical applications, MSc dissertation, University of the Witwatersrand, (2023). [Google Scholar]
  11. C.S. Allardyce, P.J. Dyson, Ruthenium in medicine: current clinical uses and future prospects. Plat. Met. Rev., 45, 1, pp. 62–69, (2001). [Google Scholar]
  12. P. Ahangar, M.E. Cooke, M.H. Weber, D.H. Rosenzweig, Current biomedical applications of 3D printing and additive manufacturing. Appl. Sci., 9, 8, pp. 1–23, (2019). [Google Scholar]
  13. A.A Zadpoor. Design for additive bio-manufacturing: From patient-specific medical devices to rationally designed meta-biomaterials. Int. J. Molec. Sci., 18, 8, pp. 16071625, (2017). [CrossRef] [Google Scholar]
  14. J. Ni, H. Ling, S. Zhang, Z. Wang, Z. Peng, C. Benyshek, R. Zan, A.K Miri, Z. Li, X. Zhang, J. Lee. Three-dimensional printing of metals for biomedical applications. Mat. Today Bio, 3, pp. 1–18, (2019). [Google Scholar]
  15. I. Yadroitsev, I. Yadroitsava, A. Du Plessis, E. MacDonald, Fundamentals of Laser Powder Bed Fusion of Metals, pp. 245–276. Amsterdam, The Netherlands: Elsevier, (2021). [Google Scholar]
  16. A novel approach for the production of metal powders with tailored chemical composition: AMEZEMET’s rePowder, Powder Metallurgy Review, Winter 2022. [Google Scholar]
  17. L. Żrodowski, R. Wróblewski, T. Choma, B. Morończyk, M. Ostrysz, M. Leonowicz, W. Łacisz, P. Błyskun, J.S. Wróbel, G. Cieślak, B. Wysocki, Novel cold crucible ultrasonic atomization powder production method for 3D printing. Mater., 14, 10, pp. 2541–2552, (2021). [CrossRef] [Google Scholar]
  18. H. Möller, V. Motsweni, L. Zrodowski, T. Choma, Powder characterisation of Pt84- Al11-Cr3-Ru2 superalloy manufactured by ultrasonic atomisation, in Proceedings of the 8th International PGM Conference, 2-3 November 2022, Sun City, South Africa (2022). [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.