Open Access
| Issue |
MATEC Web Conf.
Volume 387, 2023
9th International BAPT Conference “Power Transmissions 2023”
|
|
|---|---|---|
| Article Number | 01004 | |
| Number of page(s) | 8 | |
| Section | Design, Analysis, Simulation, and Optimization | |
| DOI | https://doi.org/10.1051/matecconf/202338701004 | |
| Published online | 06 November 2023 | |
- S. Hahn, Encyclopedia of Automotive Engineering (2014) [Google Scholar]
- M. Alfares et al., Mech. Mach. Theory 41 (10) (2006) [Google Scholar]
- A. Iñurritegui et al., Mech. Mach. Theory 164 (2021) [Google Scholar]
- A. Iñurritegui et al., Mech. Mach. Theory 183 (2023) [Google Scholar]
- Y. Guan, et al., Mech. Mach. Theory 136 (2019) [Google Scholar]
- F. Ohshima, et al., Trans. Jpn. Soc. Mech. Eng. C 78 (786) (2012) [Google Scholar]
- AGMA 945-1-B20, “Splines – Design and Application”, American Gear Manufacturers Association, 2020 [Google Scholar]
- G. Henriot, et al., Accouplements, alignement des axes, Engrenages : Conception, Fabrication, Mise en œuvre (1983) [Google Scholar]
- R. Cedoz, et al., Society of Automotive Engineers (1994) [Google Scholar]
- ISO 21771, “Gears-Cylindrical Involute Gears and Gear Pairs-Concepts and Geometry”, International Organization for Standardization, 2007 [Google Scholar]
- Y. Guan, et al., Mech. Mach. Theory 126 (2018) [Google Scholar]
- B. de Caires, PhD thesis, Brigham Young University (2006) [Google Scholar]
- Y. Guan, et al., J. Mech. Eng. Sci. (2018) [Google Scholar]
- S. Medina, et al., J. Tribol. 124 (2) (2002) [Google Scholar]
- J. Silvers, et al., Proceeding of the FTM (2010) [Google Scholar]
- F. Curà, et al., Proc. Inst. Mech. Eng., Part C 227 (10) (2013) [Google Scholar]
- A. Iñurritegui, et al., Mech. Mach. Theory 179 (2023) [Google Scholar]
- K. Nakashima, Trans. Jpn. Soc. Mech. Eng. C 502 (54) (1988) [Google Scholar]
- D. Dudley, Prod. Eng. 28 (1957) [Google Scholar]
- ISO 4156, “Straight Cylindrical Involute Splines”, International Organization for Standardization, 2005 [Google Scholar]
- J. Larrañaga, et al., Proceedings of the 5th Inter. Conf. Power Transmission-BAPT (2016) [Google Scholar]
- Y. Guo, et al., Mech. Mach. Theory 98 (2016) [Google Scholar]
- V. Cuffaro, et al., Proc. Inst. Mech. Eng., Part C 226 (12) (2012) [Google Scholar]
- M. Benatar, et al., J. Adv. Mech. Des. 11 (6) (2017) [Google Scholar]
- Y. Guan, et al., J. Adv. Mech. Des. 5 (2021) [Google Scholar]
- V. Cuffaro, et al., Key Engineering Materials (2014) [Google Scholar]
- J.R. Mancuso, Technology & Engineering (1986) [Google Scholar]
- A. Iñurritegui, et al., Mech. Mach. Theory 173 (2022) [Google Scholar]
- W. Herbstritt, et al., Iron Steel Eng. 76 (7) (1999) [Google Scholar]
- F. Litvin, et al., Gear Geometry and Applied Theory (2004) [CrossRef] [Google Scholar]
- J. Argyris, et al., Comput. Methods Appl. Mech. Eng. 191 (11–12) (2002) [Google Scholar]
- I. Gonzalez-Perez, et al., Transactions of ASME, J. Mech. Des. 140 (2) (2017) [Google Scholar]
- MSC.Software, Marc 2019 Volume B: Element Library (2019) [Google Scholar]
- D. Petersen, PhD thesis, TIB Hannover (1989) [Google Scholar]
- DIN 5466, “Splined joints, calculation of load capacity”, Deutsche Institut für Normung, 2002 [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.