Open Access
| Issue |
MATEC Web Conf.
Volume 383, 2023
22nd Conference on Power System Engineering
|
|
|---|---|---|
| Article Number | 00005 | |
| Number of page(s) | 13 | |
| DOI | https://doi.org/10.1051/matecconf/202338300005 | |
| Published online | 20 October 2023 | |
- F. Hoffmann, D. Silys and M. Doppelbauer, Transient Thermal Model for Ball Bearings in Electrical Machines, 2020 International Conference on Electrical Machines (ICEM), pp. 871-882, 2020, 10.1109/ICEM49940.2020.9270718. [Google Scholar]
- J. Takabi and M. M. Khonsari, Experimental Testing and Thermal Analysis of Ball Bearings, Springer Berlin, Heidelberg, vol. 60, pp. 93-103, 2013, https://doi.org/10.1016/j.triboint.2012.10.009. [Google Scholar]
- A. Boglietti, A. Cavagnino, D. Staton, M. Shanel, M. Mueller and C. Mejuto, Evolution and Modern Approaches for Thermal Analysis of Electrical Machines, IEEE Transactions on Industrial Electronics, vol. 56 no.3, pp. 871-882, 2009, 10.1109/TIE.2008.2011622. [CrossRef] [Google Scholar]
- K. Nakajima, Thermal Contact Resistance between Balls and Rings of a Bearing under Axial, Radial and Combined Loads, Journal of Themophysics and Heat Transfer, vol. 9 no. 1, pp. 88-95, 1995, https://doi.org/10.2514/3.632. [CrossRef] [Google Scholar]
- O. Wallschied and J. Böcker, Global Identification of a Low-Order Lumped Parameter Thermal Network for Pemanent Magnet Synchronous Motors, IEEE Transactions on Energy Conversion, vol. 31 no. 1, pp. 354-365, 2016, 10.1109/TEC.2015.2473673. [CrossRef] [Google Scholar]
- K & K Associates, Thermal Network Modelling Handbook, National Aeronautics and Space Administration, 2000. [Google Scholar]
- H. Nguyen-Schäfer, Computational Design of Rolling Bearings, Springer, 2016, https://doi.org/10.1007/978-3-319-27131-6. [CrossRef] [Google Scholar]
- T. Harris and M. Kotzalas, Essential Concepts of Bearing Technology, Taylor & Francis, Fifth Edition, 2007. [Google Scholar]
- Y. R. Jeng and P.Y. Huang, Predictions of Temperature Rise for Ball Bearings, Tribology Transactions, vol. 46 no. 1, pp. 49-56, 2003, 10.1080/10402000308982599. [CrossRef] [Google Scholar]
- T.L. Bergman and A.S. Lavine, Fundamentals of Heat and Mass Transfer, John Wiley & Sons, Eigth Edition, 2017. [Google Scholar]
- Y. Chen, H. Chen, J. Zhang and B. Zhang, Viscoelastic flow in rotating curved pipes, Physics of Fluids, vol. 18 no. 8, pp. 279-300, 2006, 10.1063/1.2336454. [Google Scholar]
- H. Aoki, H. Nohira and H. Arai, Convective Heat Transfer in an Annulus with an Inner Rotating Cylinder, The Japan Society of Mechanical Engineers, vol. 1967 no. 10, pp. 523-532, 1967, https://doi.org/10.1299/jsme1958.10.523. [CrossRef] [Google Scholar]
- M. Khonsari and E.R. Booser, Applied Tribology: Bearing Design and Lubrication, John Wiley & Sons, Third Edition, 2017, 10.1002/9781118700280. [CrossRef] [Google Scholar]
- S. Cabezas, G. Hegedus and P. Bencs, Transient heat convection analysis of a single rod in air cross-flow, Pollack Periodica, (to publish), 2023, 10.1556/606.2023.00768. [Google Scholar]
- D. H. Cooper, Hertzian Contact-Stress Deformation Coefficients, Journal of Applied Mechanics, vol. 36 no. 2, pp. 296-303, 1969, https://doi.org/10.1115/1.3564624. [CrossRef] [Google Scholar]
- M. Corinthios, Signals, Systems, Transforms, and Digital Signal Processing with MATLAB, CRC Press, 2009. [Google Scholar]
- SKF, SKF Catalogue, 2018, skf.com. [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.