EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 381 (2023) MATEC Web Conf., 381 (2023) 02004 References
Open Access
Issue
MATEC Web Conf.
Volume 381, 2023
1st International Conference on Modern Technologies in Mechanical & Materials Engineering (MTME-2023)
Article Number 02004
Number of page(s) 9
Section Materials Engineering
DOI https://doi.org/10.1051/matecconf/202338102004
Published online 13 June 2023
  1. J. Bagdahn and W. N. Sharpe, “Fracture strength of polysilicon thin films at stress concentrations,” Mater. Res. Soc. Symp. - Proc., vol. 687, no. 3, pp. 285–290, 2002, doi: 10.1557/proc-687-b9.7. [Google Scholar]
  2. T. K. Gupta and K. Raza, Optimization of ANN Architecture: A Review on Nature-Inspired Techniques. Elsevier Inc., 2019. [Google Scholar]
  3. G. Lu et al., “Tribological properties and self-compensating lubrication mechanisms of Ni3Al matrix bio-inspired shell-like composite structure,” Appl. Surf. Sci., vol. 573, no. October 2021, p. 151462, 2022, doi: 10.1016/j.apsusc.2021.151462. [CrossRef] [Google Scholar]
  4. E. A. Flores-Johnson, L. Shen, I. Guiamatsia, and G. D. Nguyen, “Numerical investigation of the impact behaviour of bioinspired nacre-like aluminium composite plates,” Compos. Sci. Technol., vol. 96, pp. 13–22, 2014, doi: 10.1016/j.compscitech.2014.03.001. [CrossRef] [Google Scholar]
  5. A. Browning, C. Ortiz, and M. C. Boyce, “Mechanics of composite elasmoid fish scale assemblies and their bioinspired analogues,” J. Mech. Behav. Biomed. Mater., vol. 19, pp. 75–86, 2013, doi: 10.1016/j.jmbbm.2012.11.003. [CrossRef] [Google Scholar]
  6. C. Rice and K. T. Tan, “Horse hoof inspired biomimetic structure for improved damage tolerance and crack diversion,” Compos. Struct., vol. 220, no. March, pp. 362–370, 2019, doi: 10.1016/j.compstruct.2019.04.009. [CrossRef] [Google Scholar]
  7. W. Zhang, J. Xu, and T. X. Yu, “Dynamic behaviors of bio-inspired structures: Design, mechanisms, and models,” Eng. Struct., vol. 265, no. June, 2022, doi: 10.1016/j.engstruct.2022.114490. [CrossRef] [Google Scholar]
  8. S. Suresh Kumar, P. Sankar, R. K. J, and V. K. S, “Effect of bio-inspired surface pattern (Pangolin’s scales) and grooved mechanisms on the high velocity ballistic performance of aluminum 6061-T6 targets,” Mech. Adv. Mater. Struct., vol. 29, no. 25, pp. 4151–4169, 2022, doi: 10.1080/15376494.2021.1920072. [CrossRef] [Google Scholar]
  9. P. K. Jena, P. Ponguru Senthil, and K. Siva Kumar, “Effect of tempering time on the ballistic performance of a high strength armour steel,” J. Appl. Res. Technol., vol. 14, no. 1, pp. 47–53, 2016, doi: 10.1016/j.jart.2016.02.002. [CrossRef] [Google Scholar]
  10. S. S. Singh, A. S. Awale, and B. Nahak, “Assessment the Surface Characteristics of Heat-Treated AISI 1040 Steel Using Magnetic Nondestructive Techniques,” Russ. J. Nondestruct. Test., vol. 58, no. 5, pp. 369–380, 2022, doi: 10.1134/S1061830922050072. [Google Scholar]
  11. K. O. Sanusi and E. T. Akinlabi, “Experiment on Effect of heat treatment on mechanical and microstructure properties of AISI steel,” Mater. Today Proc., vol. 5, no. 9, pp. 17996–18001, 2018, doi: 10.1016/j.matpr.2018.06.132. [CrossRef] [Google Scholar]
  12. B. M. Gurumurthy, M. C. Gowrishankar, S. Sharma, A. Kini, M. Shettar, and P. Hiremath, “Microstructure authentication on mechanical property of medium carbon Low alloy duplex steels,” J. Mater. Res. Technol., vol. 9, no. 3, pp. S105–S111, 2020, doi: 10.1016/j.jmrt.2020.03.027. [Google Scholar]
  13. L. Ceschini, A. Marconi, C. Martini, A. Morri, and A. Di Schino, “Tensile and impact behaviour of a microalloyed medium carbon steel: Effect of the cooling condition and corresponding microstructure,” Mater. Des., vol. 45, pp. 171–178, 2013, doi: 10.1016/j.matdes.2012.08.063. [CrossRef] [Google Scholar]
  14. S. EKŞİ, “Effect of Different Heat Treatments on Mechanical Properties of AISI Steels,” Sak. Univ. J. Sci., vol. 24, no. 3, pp. 479–486, 2020, doi: 10.16984/saufenbilder.629371. [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.