Open Access
| Issue |
MATEC Web Conf.
Volume 380, 2023
4th International Symposium on Mechanics, Structures and Materials Science (MSMS 2023)
|
|
|---|---|---|
| Article Number | 01004 | |
| Number of page(s) | 3 | |
| DOI | https://doi.org/10.1051/matecconf/202338001004 | |
| Published online | 01 May 2023 | |
- Zhao, G., Yang, Y., Zhang, H., & Zhang, G. (2019). A case study integrating field measurements and numerical analysis of high-fill slope stabilized with cast-in-place piles in yunnan, china. Engineering Geology, 253, 160-170. https://doi.org/10.1016/j.enggeo.2019.03.005. [CrossRef] [Google Scholar]
- Yang, J., Liang, S., Zhu, X., Sun, C., & Guo, Z. (2017). Seismic behavior of precast concrete coupled shear walls with engineered cementitious composite (ECC) in the critical cast-in-place regions. Science China. Technological Sciences, 60(8), 1244-1254. https://doi.org/10.1007/s11431-016-9052-2. [CrossRef] [Google Scholar]
- Lin, X., & Jie, S. (2019). Analysis of the development and trend of china’s prefabricated buildings. IOP Conference Series. Earth and Environmental Science, 371(2), 22043. https://doi.org/10.1088/17551315/371/2/022043. [CrossRef] [Google Scholar]
- Furnish et al. American Institute of Physics, Melville, NY, 2002, pp. 651–654. Filiatrault, A., & Sullivan, T. (2014). Performance-based seismic design of nonstructural building components:The next frontier of earthquake engineering. Earthquake Engineering and Engineering Vibration, 13(S1), 17-46. https://doi.org/10.1007/s11803-014-0238-9. [Google Scholar]
- Wang, Q., Senatore, G., Jansen, K. M. B., Habraken, A., & Teuffel, P. (2021). Seismic control performance of a three-story frame prototype equipped with semi-active variable stiffness and damping structural joints. Earthquake Engineering & Structural Dynamics, 50(13), 3379-3402. https://doi.org/10.1002/eqe.3514. [CrossRef] [Google Scholar]
- Oettel, V., & Empelmann, M. (2019). Structural behavior of profiled dry joints between precast ultrahigh performance fiber reinforced concrete elements. Structural Concrete : Journal of the FIB, 20(1), 446-454. https://doi.org/10.1002/suco.201800117. [CrossRef] [Google Scholar]
- Foxell, S. (2018). Professionalism for the built environment. CRC Press. https://doi.org/10.1201/9781315707402. [CrossRef] [Google Scholar]
- Zhang, L., Li, X., aNie, Z., Huang, H., & Niu, L. (2016). Comparison of microstructure and mechanical properties of TIG and laser welding joints of a new Al–Zn–Mg–Cu alloy. Materials & Design, 92, 880-887. https://doi.org/10.1016/j.matdes.2015.12.117. [CrossRef] [Google Scholar]
- Liu, F., Shan, M., Zhao, L., & Zhang, J. (2018). Probabilistic bolt load distribution analysis of composite single-lap multi-bolt joints considering random bolt-hole clearances and tightening torques. Composite Structures, 194, 12-20. https://doi.org/10.1016/j.compstruct.2018.03.100. [CrossRef] [Google Scholar]
- Okawachi, T., Ishihata, K., Nomoto, N., Tezuka, M., Kamikuri, Y., Nozoe, E., & Nakamura, N. (2020). Using three-dimensional nasal forms to compare definitive unilateral cleft lip nose correction with/without a cross-lap joint cartilage graft technique. Journal of Cranio-Maxillo-Facial Surgery, 48(11), 1035-1044. https://doi.org/10.1016/j.jcms.2020.08.008. [CrossRef] [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.