Open Access
| Issue |
MATEC Web Conf.
Volume 378, 2023
SMARTINCS’23 Conference on Self-Healing, Multifunctional and Advanced Repair Technologies in Cementitious Systems
|
|
|---|---|---|
| Article Number | 04007 | |
| Number of page(s) | 6 | |
| Section | Non-Destructive Testing of Cementitious Materials | |
| DOI | https://doi.org/10.1051/matecconf/202337804007 | |
| Published online | 28 April 2023 | |
- M. Kazemi, R. Madandoust, J. Brito, “Compressive strength assessment of recycled aggregate concrete using Schmidt rebound hammer and core testing”, Construction and Building Materials, 224 630–638 (2019) [CrossRef] [Google Scholar]
- I. Lawson, K. A. Danso, H. C. Odoi, C. A. Adjei, F.K. Quashie, I.I. Mumuni, I. S. Ibrahim, “Non-Destructive Evaluation of Concrete using Ultrasonic Pulse Velocity”, Res. J. Appl. Sci. Eng. Technol., 3 499–504 (2011) [Google Scholar]
- A. Michel, B. Pease, M. R. Geiker, H. Stang, J. F. Olesen, “Monitoring reinforcement corrosion and corrosion-induced cracking using non-destructive x-ray attenuation measurements”, Cement Concrete Research, 41 1085–1094 (2011) [CrossRef] [Google Scholar]
- M. Janku, I. Brezina, J. Grošek, “Use of Infrared Thermography to Detect Defects on Concrete Bridges”, Procedia Eng., 190 62–69 (2017) [CrossRef] [Google Scholar]
- T. Omar, M. L. Nehdi, “Remote sensing of concrete bridge decks using unmanned aerial vehicle infrared thermography”, Automation in Construction, 83 360–371 (2017) [CrossRef] [Google Scholar]
- H. Liu, C. Lin, J. Cui, L. Fan, X. Xie, B. F. Spencer, “Detection and localization of rebar in concrete by deep learning using ground penetrating radar”, Automation in construction 118 (2020) [Google Scholar]
- P. Wiwatrojanagul, R. Sahamitmongkol, S. Tangtermsirikul, N. Khamsemanan, “A new method to determine locations of rebars and estimate cover thickness of RC structures using GPR data”, Construction and Building Materials, 140 257–273 (2017) [CrossRef] [Google Scholar]
- Y. Oyama, L. Zhen, T. Tanabe, M. Kagaya, “Subterahertz imaging of defects in building blocks”, NDT&E Internationals, 42 28–33 (2009) [CrossRef] [Google Scholar]
- J. Dash, S. Ray, K. Nallappan, S. Sasmal, B. Pesala, “Non-destructive inspection of internal defects in concrete using continuous wave 2D terahertz imaging system”, 2013 38th International Conference on Infrared, Millimeter, and Terahertz Waves (IRMMW-THz), Sep. 2013. [Google Scholar]
- Y. Tokikaze, T. Yamaguchi, T. Minamikawa, E. Hase, K. Yamaguchi, A. Suzuki, T. Ueda, T. Yasui, “Ultralow-frequency ultranarrow-bandwidth coher ent terahertz imaging for nondestructive testing of mortar material”, Optics Express, 30 (2022) [Google Scholar]
- S.R. Tripathi, H. Ogura, H. Kawagoe, H. Inoue, T. Hasegawa, Kei, Takeya, K. Kawase, “Measurement of chloride ion concentration in concrete structures using terahertz time domain spectroscopy (THz- TDS)”, Corros. Sci.. 62 5–10 (2012) [CrossRef] [Google Scholar]
- T. Nishiwaki, K. Shimizu, T. Tanabe, D. Gardner, R. Maddalena, “Terahertz (THz) Wave Imaging in Civil Engineering to Assess Self-Healing of Fiber- Reinforced Cementitious Composites (FRCC)”, Journal of Advanced Concrete Technology, 21 58–75 (2023) [CrossRef] [Google Scholar]
- S. Fan, T. Li, J. Zhou, X. Liu, X. Liu, H. Qi, Z. Mu, “Terahertz non-destructive imaging of cracks and cracking in structures of cement-based materials”, AIP Advance, 7 (2017) [Google Scholar]
- H. Togo, T. Kojima, S. Mochizuki, N. Kukutu, “Millimeter-Wave Imaging for Detecting Surface Cracks with Bill-posting Prevention Sheet”, NTT Technical Review, 10 (2012) [Google Scholar]
- T. Tanabe, T. Kanai, K. Kuroo, T. Nishiwaki, Y. Oyama, “Non-Contact Terahertz Inspection of Water Content in Concrete of Infrastructure Buildings”, World J. Eng. Tech., 6 275–281 (2018) [CrossRef] [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.