Open Access
| Issue |
MATEC Web Conf.
Volume 378, 2023
SMARTINCS’23 Conference on Self-Healing, Multifunctional and Advanced Repair Technologies in Cementitious Systems
|
|
|---|---|---|
| Article Number | 02018 | |
| Number of page(s) | 7 | |
| Section | Self-Healing Cementitious Materials | |
| DOI | https://doi.org/10.1051/matecconf/202337802018 | |
| Published online | 28 April 2023 | |
- N. De Belie, E. Gruyaert, A. Al-Tabbaa, P. Antonaci, C. Baera, D. Bajare, A. Darquennes, R. Davies, L. Ferrara, T. Jefferson, C. Litina, B. Miljevic, A. Otlewska, J. Ranogajec, M. Roig-Flores, K. Paine, P. Lukowski, P. Serna, J. M. Tulliani, S. Vucetic, J. Wang, H.M. Jonkers, Adv. Mater. Interfaces, 5 (17) (2018) [Google Scholar]
- M. Wu, B. Johannesson, M. Geiker, Constr. Build. Mater. 28, 571 (2012). [CrossRef] [Google Scholar]
- Z. Lv, D. Chen, Materiales de Construcción, 64, 316 (2014) [Google Scholar]
- N. Hearn, Mater. Struct. 31, 563 (1998) [CrossRef] [Google Scholar]
- K. Van Tittelboom, N. De Belie, Materials, 6, 2182 (2013) [CrossRef] [Google Scholar]
- P. Termkhajornkit, T. Nawa, Y. Yamashiro, T. Saito, Cem Concr. Compos. 31, 195 (2009) [CrossRef] [Google Scholar]
- M. De Rooij, K. Van Tittelboom, N. De Belie, E. Schlangen, Self-Healing Phenomena in Cement- Based Materials (2013) [CrossRef] [Google Scholar]
- M. Sahmaran, G. Yildirim, T. K. Erdem, Cem Concr. Compos. 35, 89 (2013) [CrossRef] [Google Scholar]
- K. Van Tittelboom, E. Gruyaert, H. Rahier, N. De Belie, Constr. Build. Mater. 37, 349 (2012) [CrossRef] [Google Scholar]
- A. de Souza Oliveira, O. da Fonseca Martins Gomes, L. Ferrara, E. de Moraes Rego Fairbairn, R. Dias Toledo Filho, J. Build. Eng. 41, 102400 (2021) [CrossRef] [Google Scholar]
- ACI Committee 212, Report on Chemical Admixtures for Concrete, American Concrete Institute (ACI), Ch. 15, 46 (2010) [Google Scholar]
- K. Sisomphon, O. Copuroglu, E.A.B. Koenders, Cem. Concr. Compos. 34, 566 (2012) [CrossRef] [Google Scholar]
- M. Roig-Flores, S. Moscato, P. Serna, L. Ferrara, Constr. Build. Mater. 86, 1 (2015) [CrossRef] [Google Scholar]
- H. F. Li, Q. Q. Yu, K. Zhang, X. Y. Wang, Y. Liu, G. Z. Zhang, Case Studies in Constr. Mater. 18, e01713 (2023) [Google Scholar]
- B. Park, Y. Cheol Choi, J. Mater. Res. Technol. 8 (6), 6058 (2019) [CrossRef] [Google Scholar]
- L. Ferrara, V. Krelani, M. Carsana, Constr. Build. Mater. 68, 535 (2014) [CrossRef] [Google Scholar]
- E. Cuenca, A. Mezzena, L. Ferrara, Constr. Build. Mater. 266, Part B, 121447 (2021) [CrossRef] [Google Scholar]
- E. Fidanchevski, B. Angjusheva, V. Jovanov, P. Murtanovski, L. Vladiceska, N. Stamatovska Aluloska, J. Krneta Nikolic, A. Ipavec, K. Ster, M. Mrak, Sabina Dolenec, J. Radioanal. Nucl. Che., 330, 685 (2021) [CrossRef] [Google Scholar]
- CEN. EN 196-1 Methods of testing cement - Part 1: Determination of strength (2016) [Google Scholar]
- P. R. Lustosa, M. S. Magalhães, ICBBM, 37(2), 107 (2019) [Google Scholar]
- CEN. EN 1015-11 Methods of test for mortar for masonry - Part 11: Determination of flexural and compressive strength of hardened mortar (2019) [Google Scholar]
- K. Van Tittelboom, N. De Belie, D. Van Loo, P. Jacobs, Cem. Concr. Compos. 33, 497 (2011) [CrossRef] [Google Scholar]
- CEN. EN 13057 Products and systems for the protection and repair of concrete structures - Test methods - Determination of resistance of capillary absorption (2002) [Google Scholar]
- L. Ferrara, E. Cuenca Asensi, F. Lo Monte, M. Roig Flores, M. Sanchez Moreno, D. Snoeck, T. Van Mullem, N. De Belie, Proceedings, 2, 454 (2018) [Google Scholar]
- D. Snoeck, K. Van Tittelboom, S. Steuperaert, P. Dubruel, N. De Belie, J. Intell. Mater. Syst. Struct. 25(1), 13 (2014) [CrossRef] [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.