EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 378 (2023) MATEC Web Conf., 378 (2023) 02003 References
Open Access
Issue
MATEC Web Conf.
Volume 378, 2023
SMARTINCS’23 Conference on Self-Healing, Multifunctional and Advanced Repair Technologies in Cementitious Systems
Article Number 02003
Number of page(s) 6
Section Self-Healing Cementitious Materials
DOI https://doi.org/10.1051/matecconf/202337802003
Published online 28 April 2023
  1. P.K. Mehta, P.J.M. Monteiro, Concrete : microstructure, properties, and materials, Mcgraw-Hill Education PP - New York, 2014. [Google Scholar]
  2. M. De Rooij, K. Van Tittelboom, N. De Belie, E. Schlangen, Self-healing phenomena in cement-Based materials: state-of-the-art report of RILEM technical committee 221-SHC: self- Healing phenomena in cement-Based materials, Springer, 2013. [CrossRef] [Google Scholar]
  3. N. Makul, Advanced smart concrete-A review of current progress, benefits and challenges, J. Clean. Prod. 274 (2020) 122899. [CrossRef] [Google Scholar]
  4. Z. Wu, H.S. Wong, N.R. Buenfeld, Influence of drying-induced microcracking and related size effects on mass transport properties of concrete, Cem. Concr. Res. 68 (2015) 35–48. [CrossRef] [Google Scholar]
  5. S.A. Sedgwick, P. Lopez, K. Reynolds, J. Wilkening, Industrial scale production of self- healing concrete, (2016). [Google Scholar]
  6. S.K. Ghosh, Self-healing materials: fundamentals, design strategies, and applications, Wiley Online Library, 2009. [Google Scholar]
  7. K. Van Breugel, Is there a market for self- healing cement-based materials, in: Proc. First Int. Conf. Self-Healing Mater., 2007: pp. 1–9. [Google Scholar]
  8. F. Jroundi, M. Schiro, E. Ruiz-Agudo, K. Elert, I. Martín-Sánchez, M.T. González-Muñoz, C. Rodriguez-Navarro, Protection and consolidation of stone heritage by self- inoculation with indigenous carbonatogenic bacterial communities, Nat. Commun. 8 (2017) 279. [CrossRef] [Google Scholar]
  9. B. Kristiansen, Process economics, Basic Biotechnol. (2001) 239–252. [Google Scholar]
  10. G. Kamizoulis, A. Bahri, F. Brissaud, A.N. Angelakis, Wastewater recycling and reuse practices in Mediterranean region: Recommended Guidelines, Arab Water World Mag. 34 (2003). [Google Scholar]
  11. J. Ahmad, S. Commins, S. Devarajan, D. Filmer, J. Hammer, L. Pritchett, R. Reinikka, S. Shah, A. Soucat, World Development Report 2004: making services work for poor people, (2003). [Google Scholar]
  12. T. Schwartz, S. Kalmbach, S. Hoffmann, U. Szewzyk, U. Obst, PCR-based detection of mycobacteria in biofilms from a drinking water distribution system, J. Microbiol. Methods. 34 (1998) 113–123. [CrossRef] [Google Scholar]
  13. K.O. Konhauser, Diversity of bacterial iron mineralization, Earth-Science Rev. 43 (1998) 91–121. [CrossRef] [Google Scholar]
  14. N.A. Magarvey, J.M. Keller, V. Bernan, M. Dworkin, D.H. Sherman, Isolation and characterization of novel marine-derived actinomycete taxa rich in bioactive metabolites, Appl. Environ. Microbiol. 70 (2004) 7520–7529. [CrossRef] [Google Scholar]
  15. R. Lan, S. Tao, J.T.S. Irvine, A direct urea fuel cell-power from fertiliser and waste, Energy Environ. Sci. 3 (2010) 438–441. [CrossRef] [Google Scholar]
  16. Y.-N. Lee, Calcite production by Bacillus amyloliquefaciens CMB01, J. Microbiol. 41 (2003) 345–348. [Google Scholar]
  17. PN-EN 196-1:1996. Methods of testing cement. Determination of strength. 1996., n.d. [Google Scholar]
  18. G.J. Bollen, The selective effect of heat treatment on the microflora of a greenhouse soil, Netherlands J. Plant Pathol. 75 (1969) 157–163. [CrossRef] [Google Scholar]
  19. K. Paine, Bacteria-based self-healing concrete: Effects of environment, exposure and crack size, in: Proc. RILEM Conf. Microorg. Mater. Interact., RILEM Publications SARL Paris, France, 2016: pp. 1–15. [Google Scholar]
  20. EN 196-3: Methods of testing cement-Part 3: Determination of setting times and soundness, 2016., n.d. [Google Scholar]
  21. PN-EN 1015-2. 2000. Methods of Test for Mortar for Masonry-Part 2, 2000., n.d. [Google Scholar]
  22. J. Kubica, I. Galman, Investigations on flexural and compressive strengths of mortar dedicated to clinker units—influence of mixing water content and curing time, Materials (Basel). 15 (2022) 347. [CrossRef] [Google Scholar]
  23. C. Shi, X. Chen, and Z. Lu, “Effect of organic matter on the setting time of cement and mortar,” Construction and Building Materials, vol. 199, pp. 396–404, Apr. 2019. [CrossRef] [Google Scholar]
  24. J. Gontarz, J. Podgórski, Analysis of crack propagation in a “pull-out” test, Stud. Geotech. Mech. 41 (2019) 160–170. [CrossRef] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.