Open Access
Issue
MATEC Web Conf.
Volume 370, 2022
2022 RAPDASA-RobMech-PRASA-CoSAAMI Conference - Digital Technology in Product Development - The 23rd Annual International RAPDASA Conference joined by RobMech, PRASA and CoSAAMI
Article Number 10001
Number of page(s) 8
Section Product Development
DOI https://doi.org/10.1051/matecconf/202237010001
Published online 01 December 2022
  1. E. Commission, “MEDDEV 2.7/1 revision 4, Clinical evaluation: a guide for manufacturers and notified bodies; MEDDEV 2.7/1 revision 4, Clinical evaluation: a guide for manufacturers and notified bodies.” [Google Scholar]
  2. South African Health Products Regulatory Authority, “Classification of medical devices and IVDs,” (2019) [Google Scholar]
  3. U.S. Government, “Content and Format of a Traditional 510(k).” https://www.fda.gov/medical-devices/premarket-notification-510k/how-prepare-traditional-510k (accessed May 24, 2022) [Google Scholar]
  4. P. Hilton, Rapid tooling: technologies and industrial applications. CRC press (2000) [Google Scholar]
  5. M. Mehrpouya, D. Tuma, T. Vaneker, M. Afrasiabi, M. Bambach, and I. Gibson, “Multimaterial powder bed fusion techniques,” Rapid Prototyping Journal, RPJ, 28, no. 11, pp. 1–19 (2022) [CrossRef] [Google Scholar]
  6. J. Combrinck, B. van As, G. J. Booysen, and D. J. de Beer, “Cost-effectiveness of direct metal laser sintered maraging steel inserts for plastic injection moulding process,” South African Journal of Industrial Engineering, SAJIE, 30, no. 3, pp. 52–62 (2019) [Google Scholar]
  7. J. Combrinck, J. G. van der Walt, G. J. Booysen, and D. J. de Beer, “Evaluating the suitability of alumide® tooling for injection moulding of different polymers,” South African Journal of Industrial Engineering, SAJIE, 29, no. 3 Special Edition, pp. 271–283 (2018) [Google Scholar]
  8. J. Combrinck, G. J. Booysen, J. G. van der Walt, and D. J. de Beer, “Limited ruin production using Alumide® tooling for the plastic injection moulding process,” South African Journal of Industrial Engineering, SAJIE, 23, no. 2, pp. 131–146 (2012) [Google Scholar]
  9. J. Combrinck, J. G. van der Walt, G. J. Booysen, and D. J. de Beer, “Rapid tooling applications for the injection moulding process using laser sintered Alumide,” in Proceedings of the 8th International Conference on Advanced Technologies, ICAT’19, 26-30 August 2019, Sarajevo, Bosnia and Herzegovina (2019) [Google Scholar]
  10. R. Udroiu and I. C. Braga, “Polyjet technology applications for rapid tooling.” In Proceedings of the 21st Innovative Manufacturing Engineering & Energy International Conference, IManE&E, 3 July 2017, Iasi, Romania (2017) [Google Scholar]
  11. O. Gülcan, K. Günaydın, and A. Tamer, “The State of the Art of Material Jetting-A Critical Review,” in Polymers, 13, 2829 (2021) [CrossRef] [Google Scholar]
  12. J. R. C. Dizon, A. D. Valino, L. R. Souza, A. H. Espera, Q. Chen, and R. C. Advincula, “3D printed injection molds using various 3D printing technologies,” in Materials Science Forum, MSF, 1005, pp. 150–156 (2020) [CrossRef] [Google Scholar]
  13. V. Cojocaru, D. Frunzaverde, D. Nedelcu, C. -octavian Miclosina, and G. Marginean, “Study Regarding the Influence of the Printing Orientation Angle on the Mechanical Behavior of Parts Manufactured by Material Jetting,” Materiale Plastice, MP, 58, no. 3, pp. 198–209, (2021) [CrossRef] [Google Scholar]
  14. C. Whelan and C. Sheahan, “Rapid Tooling: A Model and Methodology for the Development of Additive Manufacturing Based Tooling for Injection Moulding,” Master thesis (2021) [Google Scholar]
  15. E. Walsh, J. H. ter Horst, and D. Markl, “Development of 3D printed rapid tooling for micro-injection moulding,” Chemical Engineering Science, CES, 235, p. 116498 (2021) [CrossRef] [Google Scholar]
  16. L. Bartlett, E. Grundén, R. Mulyana, and J. M. Castro, “A preliminary study on the performance of additive manufacturing tooling for injection moulding,” in Materials Science, MS, 2017, pp. 100–104 (2017) [Google Scholar]
  17. O. Tuteski and A. Kočov, “Tensile strength and dimensional variances in parts manufactured by sla 3D printing” in Industry 4.0, 6, pp. 143-149 (2021) [Google Scholar]
  18. Formlabs, “Formlabs Material Library.” [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.