Effects of energy density on the microstructure evolution of TiC/Ti6Al4V-ELI metal composite fabricated with laser metal deposition

Open Access

Issue		MATEC Web Conf. Volume 370, 2022 2022 RAPDASA-RobMech-PRASA-CoSAAMI Conference - Digital Technology in Product Development - The 23^rd Annual International RAPDASA Conference joined by RobMech, PRASA and CoSAAMI


Article Number		08004
Number of page(s)		8
Section		AM Part Characterisation
DOI		https://doi.org/10.1051/matecconf/202237008004
Published online		01 December 2022

J. Kranz, D. Hertzog and C. Emmelmann, “Design guidelines for laser additive manufacturing of light structures in Ti6Al4 V,” Journal of Laser Application, 2015. [Google Scholar]
L. Li, J. Wang, P. Lin and H. Liu, “Microstructural and mechanical properties of functionally graded TiC/Ti6Al4 V composite fabricated by laser melting deposition,” Ceramics International, vol. 43, pp.16638–16651, 2017. [CrossRef] [Google Scholar]
N. K. K. Arthur, C. Siyaya, S. Pityana and M. Tlotleng, “Microstructural response of Ti6Al4 V-ELI alloyed with molybdenum by direct energy deposition,” Journal of materials engineering and performance, vol. 30, no. 7, pp.5455–5465, 2021. [CrossRef] [Google Scholar]
J. Qi, H. H. Wang, C. M. Zou and Z. J. Wei, “Influence of matrix characteristics on tensile properties of in-situ synthesized TiC/TA15 composite,” Materials Science Engineering, vol. A 553, pp.59–66, 2012. [CrossRef] [Google Scholar]
F. Weng, H. Yu, C. Chen, J. Liu and L. Zhao, “Microstructures and properties of TiN reinforced Co-based composite coatings modified with Y2O3 by laser cladding on Ti6Al4 V alloy,” Journal of Alloys and Compounds, vol. 650, pp.178–184, 2015. [CrossRef] [Google Scholar]
Q. Meng, L. Geng and D. Ni, “Laser cladding NiCoCrAlY coating on Ti6Al4 V,” Materials Letters, vol. 59, no. 22, pp.2774–2777, 2005. [CrossRef] [Google Scholar]
J. Cui, W. Zhai, M. K. Lu, H. Zhang, M. Pang and G. F. Yang, “Experimental study of the microscopic characteristics of Ti-based laser cladding Ti+7YSZ composite thermal barrier coatings,” Optik, vol. 208, p.164087, 2020. [CrossRef] [Google Scholar]
X. Wang, X. Ma, Q. Nie and M. Wang, “Effects of Y addition on microstructure and mechanical properties of TiC/Ti6Al4 V composite,” Intermetallics, vol. 31, pp.242–248, 2012. [CrossRef] [Google Scholar]
Y. Lei, R. Sun, J. Lei, Y. Tang and W. Niu, “A new theoretical model for high power laser clad TiC/NiCrBSiCcomposite coating on Ti6Al4 V alloys,” Optics and lasers in engineering, vol. 48, no. 9, pp.899–905, 2010. [CrossRef] [Google Scholar]
P. Jiang, X. L. He, X. A. Li, L. Yu and H. Wang, “Wear resistance of a laser surface alloyed Ti6Al4 V alloy,” Surface and Coatings Technology, vol. 130, no. 1, pp.24–28, 2000. [CrossRef] [Google Scholar]
Y. Tian and C. Z. Chen, “Microstructure and wear propertie of in situ formed composite coatings produced by laser alloying technique,” Materials Letters, vol. 61, no. 3, pp.635–638, 2007. [CrossRef] [Google Scholar]
Z. Zhou, Y. Liu, Q. Zhan and K. Wang, “Microstructure evolution and mechanical properties of in-situ Ti6Al4 V-TiB composites manufactured by selective laser melting,” Composites part B: Engineering, vol. 207, p.108567, 2021. [CrossRef] [Google Scholar]
P. Ramasobane, P. M. Mashinini and B. N. Masina, “In-situ synthesis ofTiC/Ti6-Al-4 V-ELI composite by laser,” South African Journal for Science and Technology / Suid-Afrikaanse Tydskrif vir Natuurwetenskap en Tegnologie, vol. 40, pp.70–74, 2021. [Google Scholar]
K. Antony and N. Arivazhagan, “Studies on energy penetration and marangoni effect during laser melting process,” Journal ngineering Science and Technology, vol. 10, no. 4, pp.509–525, 2015. [Google Scholar]
L. Li, J. Wang, P. Lin and H. Liu, “Microstructural and mechanical properties of functionally 204 garded TiC/Ti6Al4 V composite fabricated by laser melting deposition,” Ceramics International, pp.16638–16651, 2017. [Google Scholar]
J. D. Wang, L. Q. Li, C. W. Tan, H. Liu and P. P. Lin, “Microstructure and Tensile Properties of TiCp/Ti6Al4 V Titanium Matrix Composites Manufactured by Laser Melting Deposition,” Journa of Material Processing Technology, vol. 252, pp.524–536, 2018. [CrossRef] [Google Scholar]
B. Ya, B. W. Zhou, H. S. Yang, B. K. Huang, F. Jia and X. G. Zhang, “Microstructure and mechanical properties of in situ casting TiC/Ti6Al4 V composites through adding multi-walled carbon nanotubes,” Journal of Alloys and Compounds, vol. 637, pp.456–460, 2015. [CrossRef] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.