Open Access
| Issue |
MATEC Web Conf.
Volume 369, 2022
40th Annual Conference - Meeting of the Departments of Fluid Mechanics and Thermomechanics in the connection with XXIII. International Scientific Conference - The Application of Experimental and Numerical Methods in Fluid Mechanics and Energy (40th. MDFMT & XXIII. AEaNMiFMaE-2022)
|
|
|---|---|---|
| Article Number | 02006 | |
| Number of page(s) | 10 | |
| Section | Modelling and Simulation in Fluid Mechanics and Energy | |
| DOI | https://doi.org/10.1051/matecconf/202236902006 | |
| Published online | 04 November 2022 | |
- Li, CX; Wang, SL and Jia, YK (2011). The performance of a centrifugal fan with enlarged impeller. Energy Conversion and Management 52 (2011) 2902–2910. [CrossRef] [Google Scholar]
- Gangipamula R, Ranjan P, Patil RS (2022). Study on fluid dynamic characteristics of a low specific speed centrifugal pump with emphasis on trimming operations. International Journal of Heat and Fluid Flow 95 (2022) 108952. [CrossRef] [Google Scholar]
- Khoeini D, Tavakoli MR (2018). Flow Characteristics of a Centrifugal Pump with Different Impeller Trimming Methods. FME Transactions (2018) 46, 463-468 [CrossRef] [Google Scholar]
- Elyamin G.R.H.A., Bassily M.A., Khalil K.Y., Gomaa M.Sh (2019). Effect of impeller blades number on the performance of a centrifugal pump. Alexandria Engineering Journal (2019) 58, 39–48. [CrossRef] [Google Scholar]
- Sheng Y.S., Yu K.F., Ming J.W., Yun Q.X. (2013). Effects of impeller trimming influencing pump as turbine. Computers & Fluids 67 (2012) 72–78 [Google Scholar]
- Swain D, Engeda A. (2014). Performance impact of impeller blade trimming on centrifugal compressors. Proc IMechE Part A: J Power and Energy 2014, Vol. 228(8) 878–888. [CrossRef] [Google Scholar]
- Tan L, Yang Y., Shi W., Chen Ch., Xie Z. (2021). Influence of Blade Wrap Angle on the Hydrodynamic Radial Force of Single Blade Centrifugal Pump. Appl. Sci. 2021, 11, 9052. [CrossRef] [Google Scholar]
- Li L., Cao S., Li J., Nie R., Hou L. (2021). Review of Rotor Balancing Methods. Machines 2021, 9, 89. [CrossRef] [Google Scholar]
- Deng Q, Pei J, Wang W, Lin B, Zhang C, Zhao J. (2021). Energy Loss and Radial Force Variation Caused by Impeller Trimming in a Double-Suction Centrifugal Pump. Entropy 2021, 23, 1228. [CrossRef] [Google Scholar]
- Shadab M, Karimipour M, Najafi A F, Paydar R, Nourbakhsh S A (2022). Effect of impeller shroud trimming on the hydraulic performance of centrifugal pumps with low and medium specific speeds. Engineering Applications of Computational Fluid Mechanics 2022, VOL. 16, NO. 1, 514–535 [CrossRef] [Google Scholar]
- Chen J, Shi W, Zhang D. (2021). Influence of blade inlet angle on the performance of a single blade centrifugal pump. Engineering Applications of Computational Fluid Mechanics 2021, VOL. 15, NO. 1, 462–475 [CrossRef] [Google Scholar]
- Benra, F. K. (2006). Numerical and Experimental Investigation on the Flow Induced Oscillations of a Single-Blade Pump Impeller. Journal of Fluids Engineering 2006, 128, 783–793 [Google Scholar]
- Liu M, Tan L, Ca S. (2022). Performance Prediction and Geometry Optimization for Application of Pump as Turbine: A Review. Optimization for Application of Pump as Turbine: A Review. Front. Energy Res. 9:818118. [Google Scholar]
- Quan H, Li R, Su Q, Han W, and Wang P (2013). Analysis on Energy Conversion of Screw Centrifugal Pump in Impeller Domain Based on Profile Lines. Hindawi Publishing Corporation Advances in Mechanical Engineering Volume 2013, Article ID 512523, 11 pages [Google Scholar]
- Li W. G. (2011). Impeller Trimming of an Industrial Centrifugal Viscous Oil Pump. Int J Advanced Design and Manufacturing Technology, Vol. 5/ No. 1/ December – 2011 [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.