Die steel for hot deformation of copper and copper alloys

Open Access

Issue		MATEC Web Conf. Volume 366, 2022 8^th International BAPT Conference “Power Transmissions 2022”


Article Number		04003
Number of page(s)		6
Section		Materials and Technological Processes
DOI		https://doi.org/10.1051/matecconf/202236604003
Published online		06 October 2022

Кuchеryavyi V.I. (1990) Shtampovye stali dlya goryachego deformirovaniya [Hot forming die steels] – М.: Маshynostroenie. – S. 655-682. [Google Scholar]
Gur’ev A.M. (2001) Ekonomnolegirovannye stali dlya litykh shtampov goryachego deformirovaniya ikh termoceklicheskaya i khimikotermoceklicheskaya оbrabotka [Sparingly alloyed steels for hot-forming cast dies, their thermocyclic and chemical thermocycling treatment]: dis. dokt. tekhn. nauk: 05.16.01 / А.М. Gur’ev – Tomsk, 487s. [Google Scholar]
Zavyalov A.C. (1943) К teorii legirovaniya i termicheskoyi obrabotki stali [On the theory of alloying and heat treatment of steel] – Central’nyi nauchno-issledovatel’skiy institut. – 52s. [Google Scholar]
Ozerskiy A.D. (1984) Uprochnenie stali EP930 dlya matric goryachego deformirovaniya splavov [Hardening of steel EP930 for hot pressing dies of copper alloys]. – Cvetnye metally. – Non-ferrous metals, № 10, S. 76-78. [Google Scholar]
Poznyak L.A. (1996) Instrumental’nye stali [Tool steels] – К.: Naukova dumka, – 488s. [Google Scholar]
Lebedeva N.V. (2005) Povyshenie stoikosti instrumeta dlya pressovaniya trudnodeformiruemykh cvetnykh splavov iz staleiy s reguliruemym austenintym prevrasheniem pri ekspluatacii [Increasing tool life for pressing difficult-to-deform non-ferrous alloys from steels with controlled austenite transformation during operation]: avtoreferat, dis … kand. tekhn. nauk: 05.02.01. – Sankt Peterburg, 18s. [Google Scholar]
Perep’elkina М.N. (2016) Vybir efektyvnogo leguvannya novykh shtampovykh staleyi z austenitnym peretvorennyam pry ekspluatacii [Selection of efficient alloying of new die steels with austenitic transformations during operation]. – Novi materialy і tekhnologii v metalurgii ta mashynobuduvanni. – New materials and technologies in metallurgy and machine-building, № 1, S. 11-15. [Google Scholar]
Nguen S.Kh. (2021) Struktura I uprochnenie stali s reguliruemym austenitnym prevrasheniem pri ekspluatacii [Structure and hardening of steel with controlled austenitic transformation during operation]: dis. … kand. tekhn. nauk: 05.16.01. Моsкvа, 113s. [Google Scholar]
Mes’kin V.S. (1959) Osnovy legirovaniya stali [Basics of steel alloying] – М.: Metallurgizdat. – 688s. [Google Scholar]
Sydorchuk О.М., Мyroniuk D.V., Radchenko O.K., Gogaev К.О., Hongguang Ye. (2019) Pidvyshennya teplostiykosti ta vlastyvostey shtampovoi stali z regulyuvannyam austenitnogo peretvorennya pry ekspluatacii [Increase in heat resistance and power of die steel due to regulation of austenitic transformation during operation]. – Меtaloznavstvo tа оbrobka metaliv. – Metal science and processing of metals, № 2, S. 19-25. [Google Scholar]
Sydorchuk О.М., Gogaev К.О., Radchenko O.K., Мyroniuk L.A., Мyroniuk D.V. (2020) Термічна обробка штампової сталі підвищеної стійкості [Thermal processing of die steel with increased resistance]. – Меtaloznavstvo tа оbrobka metaliv. – Metal science and processing of metals, № 2. – S. 29-37. [Google Scholar]
Sydorchuk О.М., Мyroniuk L.A., Мyroniuk D.V., Gogaev К.О., Radchenko O.K. (2020) Shampova kovana stal’ 4Kh4N5M4F2 pidvyshenoi stiykosti [Die forged steel 4Kh4N5M4F2 with increased resistance]. – Меtaloznavstvo tа оbrobka metaliv. – Metal science and processing of metals, № 4. – S. 311. [Google Scholar]
Sydorchuk О.М. (2013) Fazovo-strukturniy stan stali 40Kh3N5M3F v procesi perekrystalizacii [Phase-structural mill steel 40Kh3N5M3F in the process of recrystallization]. – Sovremennye problem fizicheskogo materiallovedeniya. – Modern problems of physical materials science. Vypusk 22. [Google Scholar]
Gogaev К.О., Sydorchuk О.М., Radchenko O.K., Mamonova A.A., Koval’ O.Yu., Luk’yanchuk V.V. (2014) Shampova stal’ dlya garyachogo deformyvannya z regulyovanym austenitnym peretvorennyam, oderzhana elektroshlakovym lyttyam [Die steel for hot forming with controlled austenitic transformations, made with electroslag castings] Sovremennye problem fizicheskogo materiallovedeniya. – Modern problems of physical materials science, № 1. – S. 40-45. [Google Scholar]
Gogaev К.О., Radchenko O.K., Sydorchuk О.М., Luk’yanchuk V.V. (2015) Tekhnologiya vygotovlennya shampovoi stali 40Kh3N5M3F [Technology for the preparation of die steel 40Kh3N5M3F for hot deformation]. – The main complex program of the National Academy of Sciences of Ukraine “Problems of resource and safety of operation of structures, spores and machines” (Kyiv: Institute of Electrical Engineering named after Y.O. Paton of the National Academy of Sciences of Ukraine), S. 669–672. [Google Scholar]
Sydorchuk О.М., Myslyvchenko O.M., Gogaev К.О., Hongguang Ye. (2022) Struktura ta vlastyvosti kovanoi stali z regulyuvannyam austenitnogo peretvorennya, pislya termichnoi obrobky ta ekspluatacii kolis ekstruderiv dlya garyachogo deformuvannya midi [The structure and power of forged steel with regulation of austenitic transformation, after thermal processing and operation of extruders for hot deformation midi]. – Fizyko-khimichna mekhanika materialiv. – Physical and chemical mechanics of materials, № 1. – S. 112118. [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.