Open Access
Issue
MATEC Web Conf.
Volume 364, 2022
International Conference on Concrete Repair, Rehabilitation and Retrofitting (ICCRRR 2022)
Article Number 05018
Number of page(s) 8
Section Fibre Reinforced Cementitious Materials
DOI https://doi.org/10.1051/matecconf/202236405018
Published online 30 September 2022
  1. Odendaal CM. Establishment of PerformanceBased Specifications for the Structural Use of Locally Available MacroSynthetic Fibres. 2015;(April). [Google Scholar]
  2. Zollo RF. Fiber-reinforced concrete: An overview after 30 years of development. Cem Concr Compos. 1997;19(2):107–22. [CrossRef] [Google Scholar]
  3. Takabatake H. Effects of dead loads on the static analysis of plates. Struct Eng Mech. 2012 Jun 25;42(6):761–81. [CrossRef] [Google Scholar]
  4. Bathias C, Pineau A (Andreé). Fatigue of materials and structures : fundamentals. 2010;511. [Google Scholar]
  5. Fataar H, Combrinck R, Boshoff WP. An experimental study on the fatigue failure of steel fibre reinforced concrete at a single fibre level. Constr Build Mater. 2021;299. [Google Scholar]
  6. Buratti N, Mazzotti C, Savoia M. Post-cracking behaviour of steel and macro-synthetic fibrereinforced concretes. Constr Build Mater. 2011 May 1;25(5):2713–22. [CrossRef] [Google Scholar]
  7. Qi J, Wu Z, Ma ZJ, Wang J. Pullout behavior of straight and hooked-end steel fibers in UHPC matrix with various embedded angles. Constr Build Mater [Internet]. 2018;191:764–74. Available from: https://doi.org/10.1016/j.conbuildmat.2018.10.067 [CrossRef] [Google Scholar]
  8. Fataar H, Combrinck R, Boshoff WP. An Experimental Study on the Fatigue Failure Mechanisms of Pre–damaged Steel Fibre Reinforced Concrete at a Single Fibre Level. RILEM Bookseries. 2021;30(September):199–208. [CrossRef] [Google Scholar]
  9. Bakaert. EC Declaration of Performance Dramix 5D 65/60BG. 2015;5–6. Available from: https://www.bekaert.com/en/product-catalog/content/dop/dramix-5d-technicaldocuments [Google Scholar]
  10. Bekaert. EC Declaration of Performance Dramix 3D 65/60BG. 2015;5–6. Available from: https://www.bekaert.com/en/product-catalog/content/dop/dramix-3d-technicaldocuments [Google Scholar]
  11. British Standard Institute. BS EN 12350-2:2009 Testing fresh concrete — Part 2: Slump test. BSI Stand Publ. 2009;5–8. [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.