Open Access
Issue
MATEC Web Conf.
Volume 363, 2022
5th International Conference on Advances in Materials, Machinery, Electronics (AMME 2022)
Article Number 01024
Number of page(s) 9
Section Research papers
DOI https://doi.org/10.1051/matecconf/202236301024
Published online 29 August 2022
  1. Padget J.C. Polymers for water-based coatings-a systematic overview[J]. Journal of coatings technology, 1994, 66(839): 89–105. [Google Scholar]
  2. Annable T., Brown R. A., Padget J. C., et al. Improvements in the application properties of water-based low VOC coatings[J]. Surface coatings international, 1998, 81(7): 321–329. [CrossRef] [Google Scholar]
  3. Jackson, K. Recent advances in water-borne protective coatings[J]. Surface coatings international, 1999, 82(7): 340–343. [CrossRef] [Google Scholar]
  4. Ifijen I. H., Maliki M., Odiachi I. J., et al. Review on Solvents Based Alkyd Resins and Water Borne Alkyd Resins: Impacts of Modification on Their Coating Properties[J]. Chemistry Africa, 2022: 1–15. [Google Scholar]
  5. Meng, X., Gao, Y. Development of Studies on Water-based Epoxy Resin[J]. Materials Review, 2006, 11(20): 384–386. [Google Scholar]
  6. Si P., Zhao B. Water-based polyurethanes for sustainable advanced manufacture[J]. The Canadian Journal of Chemical Engineering, 2021, 99(9): 1851–1869. [CrossRef] [Google Scholar]
  7. Guo K. Y., Wu Q., Mao M., et al. Water-based hybrid coatings toward mechanically flexible, superhydrophobic and flame-retardant polyurethane foam nanocomposites with high-efficiency and reliable fire alarm response[J]. Composites Part B: Engineering, 2020, 193: 108017. [CrossRef] [Google Scholar]
  8. Jiao C., Sun L., Shao Q., et al. Advances in waterborne acrylic resins: Synthesis principle, modification strategies, and their applications[J]. ACS omega, 2021, 6(4): 2443–2449. [CrossRef] [Google Scholar]
  9. Sainz M. F., Souto J. A., Regentova D., et al. A facile and green route to terpene derived acrylate and methacrylate monomers and simple free radical polymerisation to yield new renewable polymers and coatings[J]. Polymer Chemistry, 2016, 7(16): 2882–2887. [CrossRef] [Google Scholar]
  10. Karami S., Motahari S., Pishvaei M., et al. Improvement of thermal properties of pigmented acrylic resin using silica aerogel[J]. Journal of Applied Polymer Science, 2018, 135(1): 45640. [CrossRef] [Google Scholar]
  11. Li M., Li Y., Xue F., et al. Water-based acrylate copolymer/silica hybrids for facile preparation of robust and durable superhydrophobic coatings[J]. Applied Surface Science, 2018, 447: 489–499. [CrossRef] [Google Scholar]
  12. Zhong S., Li J., Cai Y., et al. Novel surfactant-free waterborne acrylic-silicone modified alkyd hybrid resin coatings containing nano-silica for the corrosion protection of carbon steel[J]. Polymer-Plastics Technology and Materials, 2019, 58(8): 866–878. [CrossRef] [Google Scholar]
  13. Ou J., Zhang M., Liu H., et al. Matting films prepared from waterborne acrylic/micro-SiO2 blends[J]. Journal of Applied Polymer Science, 2015, 132(13). [Google Scholar]
  14. Peruzzo P. J., Anbinder P. S., Pardini O. R., et al. Waterborne polyurethane/acrylate: Comparison of hybrid and blend systems[J]. Progress in Organic Coatings, 2011, 72(3): 429–437. [CrossRef] [Google Scholar]
  15. Jiao C., Shao Q., Wu M., et al. 2-(3, 4-Epoxy) ethyltriethoxysilane-modified waterborne acrylic resin: preparation and property analysis[J]. Polymer, 2020, 190: 122196. [CrossRef] [Google Scholar]
  16. Wang Y., Wu J., Zhang D., et al. Design of salt- responsive and regenerative antibacterial polymer brushes with integrated bacterial resistance, killing, and release properties[J]. Journal of Materials Chemistry B, 2019, 7(38): 5762–5774. [CrossRef] [Google Scholar]
  17. Zheng B., Ge S., Wang S., et al. Effect of γ- aminopropyltriethoxysilane on the properties of cellulose acetate butyrate modified acrylic waterborne coatings[J]. Reactive and Functional Polymers, 2020, 154: 104657. [CrossRef] [Google Scholar]
  18. Shukla S., Rai J.S.P. Synthesis and characterizations of waterborne poly (acrylate) latexes[J]. High Performance Polymers, 2014, 26(6): 653–659. [CrossRef] [Google Scholar]
  19. Guo X., Ge S., Wang J., et al. Waterborne acrylic resin modified with glycidyl methacrylate (GMA): Formula optimization and property analysis[J]. Polymer, 2018, 143: 155–163. [Google Scholar]
  20. Paul, S. Water-borne acrylic emulsion paints[J]. Progress in Organic Coatings, 1977, 5(1): 79–96. [CrossRef] [Google Scholar]
  21. Zhai L., Berg M. C., Cebeci F. C., et al. Patterned superhydrophobic surfaces: toward a synthetic mimic of the Namib Desert beetle[J]. Nano Letters, 2006, 6(6): 1213–1217. [CrossRef] [Google Scholar]
  22. Mingyang Wu, Shengsong Ge, Cuiyan Jiao, Zhangyin Yan, Heyun Jiang, Yunfeng Zhu, Binbin Dong, Mengyao Dong, Zhanhu Guo. Improving electrical, mechanical, thermal and hydrophobic properties of waterborne acrylic resin-glycidyl methacrylate (GMA) by adding multi-walled carbon nanotubes[J]. Polymer, 2020, 200(prepublish). [Google Scholar]
  23. Li S., Li H., Wang X., et al. Super-hydrophobicity of large-area honeycomb-like aligned carbon nanotubes[J]. The journal of physical chemistry B, 2002, 106(36): 9274–9276. [CrossRef] [Google Scholar]
  24. Mahadik D. B., Rao A. V., Rao A. P., et al. Effect of concentration of trimethylchlorosilane (TMCS) and hexamethyldisilazane (HMDZ) silylating agents on surface free energy of silica aerogels[J]. Journal of colloid and interface science, 2011, 356(1): 298–302. [CrossRef] [Google Scholar]
  25. Liu J., Huang J., Wujcik E. K., et al. Hydrophobic electrospun polyimide nanofibers for self-cleaning materials[J]. Macromolecular Materials and Engineering, 2015, 300(3): 358–368. [CrossRef] [Google Scholar]
  26. Brostow W., Dutta M., Rusek P. Modified epoxy coatings on mild steel: tribology and surface energy[J]. European Polymer Journal, 2010, 46(11): 2181–2189. [CrossRef] [Google Scholar]
  27. Jia S., Zhu Y., Wang Z., et al. Influences of PP-g-MA on the surface free energy, morphologies and mechanical properties of thermoplastic polyurethane/polypropylene blends[J]. Journal of Polymer Research, 2015, 22(8): 1–10. [CrossRef] [Google Scholar]
  28. Chen J. S., Sun Z., Guo P. S., et al. Effect of ion implantation on surface energy of ultrahigh molecular weight polyethylene[J]. Journal of applied physics, 2003, 93(9): 5103–5108. [CrossRef] [Google Scholar]
  29. Xie Q., Xu J., Feng L., et al. Facile creation of a super- amphiphobic coating surface with bionic microstructure[J]. Advanced materials, 2004, 16(4): 302–305. [CrossRef] [Google Scholar]
  30. Yang X., Zhu L., Zhang Y., et al. Surface properties and self-cleaning ability of the fluorinated acrylate coatings modified with dodecafluoroheptyl methacrylate through two adding ways[J]. Applied surface science, 2014, 295: 44–49. [CrossRef] [Google Scholar]
  31. Shin M. S., Lee Y. H., Rahman M. M., et al. Synthesis and properties of waterborne fluorinated polyurethane-acrylate using a solvent-/emulsifier- free method[J]. Polymer, 2013, 54(18): 4873–4882. [CrossRef] [Google Scholar]
  32. Xu H., Qiu F., Wang Y., et al. Preparation, mechanical properties of waterborne polyurethane and crosslinked polyurethane-acrylate composite[J]. Journal of applied polymer science, 2012, 124(2): 958–968. [CrossRef] [Google Scholar]
  33. Yang W., Zhu L., Chen Y., et al. Surface topography and hydrophobicity of waterborne fluorinated acrylic/silica hybrid coatings[J]. Colloids and Surfaces A: Physicochemical and Engineering Aspects, 2015, 484: 62–69. [Google Scholar]
  34. Du B., Chen F., Luo R., et al. Synthesis and characterization of nano-TiO2/SiO2-acrylic composite resin[J]. Advances in Materials Science and Engineering, 2019, 2019. [Google Scholar]
  35. Li L., Li X., Shen Y., et al. Hydrophobicity and corrosion resistance of waterborne fluorinated acrylate/silica nanocomposite coatings[J]. e-Polymers, 2021, 21(1): 779–792. [CrossRef] [Google Scholar]
  36. Meng Li, Yu Li, Fang Xue, Xinli Jing. Water-based acrylate copolymer/silica hybrids for facile preparation of robust and durable superhydrophobic coatings[J]. Applied Surface Science, 2018, 447. [Google Scholar]
  37. Hao G., Zhu L., Yang W., et al. Investigation on the film surface and bulk properties of fluorine and silicon contained polyacrylate[J]. Progress in Organic Coatings, 2015, 85: 8–14. [CrossRef] [Google Scholar]
  38. Xiong P., Guan R., Lu D., et al. Characterization of acrylic copolymer latex modified by fluorine, silicon, and epoxy resin[J]. e-Polymers, 2008, 8(1). [CrossRef] [Google Scholar]
  39. Sbardella F., Bracciale M. P., Santarelli M. L., et al. Waterborne modified-silica/acrylates hybrid nanocomposites as surface protective coatings for stone monuments[J]. Progress in Organic Coatings, 2020, 149: 105897. [CrossRef] [Google Scholar]
  40. Ji S., Gui H., Guan G., et al. Molecular design and copolymerization to enhance the anti-corrosion performance of waterborne acrylic coatings[J]. Progress in Organic Coatings, 2021, 153: 106140. [CrossRef] [Google Scholar]
  41. Wang S. T., Schork F. J., Poehlein G. W., et al. Emulsion and miniemulsion copolymerization of acrylic monomers in the presence of alkyd resin[J]. Journal of Applied Polymer Science, 1996, 60(12): 2069–2076. [CrossRef] [Google Scholar]
  42. Wu X. Q., Schork F. J., Gooch J.W. Hybrid miniemulsion polymerization of acrylic/alkyd systems and characterization of the resulting polymers[J]. Journal of Polymer Science Part A: Polymer Chemistry, 1999, 37(22): 4159–4168. [CrossRef] [Google Scholar]
  43. Zhong S., Li J., Yi L., et al. Cross-linked waterborne alkyd hybrid resin coatings modified by fluorinated acrylate-siloxane with high waterproof and anticorrosive performance[J]. Polymers for Advanced Technologies, 2019, 30(2): 292–303. [CrossRef] [Google Scholar]
  44. Duan Y., Huo Y., Duan L. Preparation of acrylic resins modified with epoxy resins and their behaviors as binders of waterborne printing ink on plastic film[J]. Colloids and surfaces a: physicochemical and engineering aspects, 2017, 535: 225–231. [Google Scholar]
  45. Liu M., Mao X., Zhu H., et al. Water and corrosion resistance of epoxy-acrylic-amine waterborne coatings: Effects of resin molecular weight, polar group and hydrophobic segment[J]. Corrosion Science, 2013, 75: 106–113. [CrossRef] [Google Scholar]
  46. Shen Y., Zhao C., Zhou J., et al. Application of waterborne acrylic emulsions in coated controlled release fertilizer using reacted layer technology[J]. Chinese Journal of Chemical Engineering, 2015, 23(1): 309–314. [Google Scholar]
  47. Pi P., Chen X., Wen X., et al. Preparation and characterization of ambient-temperature self-crosslinkable water-soluble acrylic resin for PE film ink[J]. Journal of Coatings Technology and Research, 2016, 13(1): 73–80. [CrossRef] [Google Scholar]
  48. Parvate S., Mahanwar P. Insights into the preparation of water-based acrylic interior decorative paint: tuning binder’s properties by self-crosslinking of allyl acetoacetate-hexamethylenediamine[J]. Progress in Organic Coatings, 2019, 126: 142–149. [CrossRef] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.