EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 357 (2022) MATEC Web Conf., 357 (2022) 02014 References
Open Access
Issue
MATEC Web Conf.
Volume 357, 2022
25th Polish-Slovak Scientific Conference on Machine Modelling and Simulations (MMS 2020)
Article Number 02014
Number of page(s) 11
Section Modelling and Simulation, Structural Optimization
DOI https://doi.org/10.1051/matecconf/202235702014
Published online 22 June 2022
  1. A. Stournaras, P. Stavropoulos, K. Salonitis, G. Chryssolouris An investigation of quality in CO2 laser cutting of aluminium. CIRP Journal of Manufacturing Science and Technology, 2, 61–69 (2009). [CrossRef] [Google Scholar]
  2. H.Y. Zheng, Z.Z. Han, Z.D. Chen, W.L. Chen, S. Yeo Quality and Cost.: Comparisons Between Laser and Waterjet Cutting. Journal of Materials Processing Technology, 62, 294–298 (1996). [CrossRef] [Google Scholar]
  3. D. Wojtkowiak, K. Talaśka The influence of the piercing punch profile on the stress distribution on its cutting edge. MATEC Web of Conferences, 254, 02001 (2019). [CrossRef] [EDP Sciences] [Google Scholar]
  4. D. Wojtkowiak, K. Talaśka Determination of the effective geometrical features of the piercing punch for polymer composite belts. International Journal of Advanced Manufacturing Technology, 104, 1-4, 315–332 (2019). [CrossRef] [Google Scholar]
  5. D. Wojtkowiak, K. Talaśka, A. Fierek The application of the Finite Element Method analysis in the process of designing the punching die for belt perforation. IOP Conferences: Materials Science and Engineering, 776, 012057 (2020). [CrossRef] [Google Scholar]
  6. M. Azadbakht, E. Esmaeilzadeh, M. Esmaeili-Shayan Energy consumption during impact cutting of canola stalk as a function of moisture content and cutting height. Journal of the Saudi Society of Agricultural Sciences 14, 147–152 (2015). [CrossRef] [Google Scholar]
  7. S.K. Mathanker, T.E. Grift, A.C. Hansen Effect of blade oblique angle and cutting speed on cutting energy for energycane stems. Biosystems Engineering, 1331, 64–70 (2015). [CrossRef] [Google Scholar]
  8. D. Wilczyński, K. Talaśka, I., et al. Experimental research on biomass cutting process. MATEC Web of Conferences, 157, 07016 (2018). [CrossRef] [EDP Sciences] [Google Scholar]
  9. D. Wilczyński, I. Malujda, J. Górecki, G. Domek Experimental research on the process of cutting transport belts. MATEC Web of Conferences, 254, 05014 (2019). [CrossRef] [EDP Sciences] [Google Scholar]
  10. D. Wilczyński Multifactor analysis of experiment parameters on the example of the biomass cutting process. IOP Conference Series: Materials Science and Engineering, 776, 012013 (2020). [CrossRef] [Google Scholar]
  11. D. Wilczyński, K. Wałęsa, M. Berdychowski, M. Kukla Biomass cutting tests to determine the lowest value of the process force. IOP Conference Series: Materials Science and Engineering, 776, 012014 (2020). [CrossRef] [Google Scholar]
  12. Ł. Warguła, M. Kukla, P. Krawiec, B. Wieczorek Reduction in Operating Costs and Environmental Impact Consisting in the Modernization of the Low-Power Cylindrical Wood Chipper Power Unit by Using Alternative Fuel. Energies 13, 2995 (2020). [CrossRef] [Google Scholar]
  13. Ł. Warguła, P. Krawiec, K.J. Waluś, M. Kukla Fuel Consumption Test Results for a Self-Adaptive, Maintenance-Free Wood Chipper Drive Control System. Appl. Sci., 10, 2727 (2020). [CrossRef] [Google Scholar]
  14. J. Górecki, I. Malujda, K. Talaśka, et al.: Investigation of internal friction of agglomerated dryice. Procedia Engineering, 136, 275–279 (2016). [CrossRef] [Google Scholar]
  15. J. Górecki, I. Malujda, K. Talaśka Influence of the Value of Limit densification Stress on the Quality of Pellets During the Agglomeration Process of CO2. Procedia Engineering, 136, 269–274 (2016). [CrossRef] [Google Scholar]
  16. J. Górecki, I. Malujda, K. Talaśka, et al. Dry ice compaction in piston extrusion process. Acta mechanica et automatica, 11, 4, 313–316 (2017). [CrossRef] [Google Scholar]
  17. J. Górecki, K. Talaśka, K. Wałęsa, D. Wilczyński, D. Wojtkowiak Mathematical Model Describing the Influence of Geometrical Parameters of Multichannel Dies on the Limit Force of Dry Ice Extrusion Process. Materials, 13, 15 (2020). [Google Scholar]
  18. Berdychowski, M., Talaśka, K., Malujda, I., Kukla, M.: Application of the Mohr - Coulomb model for simulating the biomass compaction process. IOP Conference Series: Materials Science and Engineering, 776(1), 012066 (2020). [CrossRef] [Google Scholar]
  19. D. Wilczyński, I. Malujda, K. Talaśka, et al. The study of mechanical properties of natural polymers in the compacting process. Procedia Engineering, 177, 411–418 (2017). [CrossRef] [Google Scholar]
  20. K. Talaśka, I. Malujda, D. Wilczyński Agglomeration of natural fibrous materials in perpetual screw technique - a challenge for designer. Procedia Engineering, 136, 63–69 (2016). [CrossRef] [Google Scholar]
  21. M. Berdychowski, J. Mielniczuk, M. Matyjaszczyk Analysis of the Yield Condition of Porous Bone-implant Fixation. Procedia Engineering, 177, 358–362 (2017). [CrossRef] [Google Scholar]
  22. M. Berdychowski, J. Mielniczuk Analysis of the porous bone-implant fixationexperimental verification of numerical model. MATEC Web of Conferences, 157, 05002 (2018). [CrossRef] [EDP Sciences] [Google Scholar]
  23. M. Dudziak, G. Domek, A. Kolodziej, et al. Contact Problems Between the Hub and the Shaft with a Three-Angular Shape of Cross-Section for Different Angular Positions. Procedia Engineering 96, 50–58 (2014). [CrossRef] [Google Scholar]
  24. M. Kukla, P. Tarkowski, I. Malujda, K. Talaśka, J. Górecki Determination of the torque characteristics of stepper motor. Procedia Engineering, 136, 375–379 (2016). [CrossRef] [Google Scholar]
  25. P. Tarkowski, I. Malujda, K. Talaśka, J. Górecki, M. Kukla Influence of the type of acceleration characteristic of the stepping motor for efficient power usage, Procedia Engineering, 136, 370–374 (2016). [CrossRef] [Google Scholar]
  26. D. Wojtkowiak, K. Talaśka, M. Berdychowski Analysis of the guiding column and sleeve cooperation in the linear slide bearing of the punching die head-punch block, IOP Conferences: Materials Science and Engineering, 776, 012055 (2020). [CrossRef] [Google Scholar]
  27. Abaqus Documentation. [Google Scholar]
  28. I.S. Boldyrev, I.A. Shchurov, A.V. Nikonov Numerical simulation of the aluminum 6061-T6 cutting and the effect of the constitutive material model and failure criteria on cutting forces prediction. Procedia Engineering, 150, 866–870 (2016). [CrossRef] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.