Open Access
Issue |
MATEC Web Conf.
Volume 351, 2021
20th International Conference Diagnostics of Machines and Vehicles “Hybrid Multimedia Mobile Stage”
|
|
---|---|---|
Article Number | 01003 | |
Number of page(s) | 7 | |
Section | Selected Diagnostic Problems of Hybrid Multimedia Mobile Stages | |
DOI | https://doi.org/10.1051/matecconf/202135101003 | |
Published online | 06 December 2021 |
- P. Gil, Int. J. Therm. Sci. 166, 106949 (2021) [CrossRef] [Google Scholar]
- E. Smyk, S. Wawrzyniak, and K. Peszyński, Mech. Mech. Eng. 24, 17 (2020) [CrossRef] [Google Scholar]
- T. Yeom, L. Huang, M. Zhang, T. Simon, and T. Cui, Int. J. Heat Mass Transf. 143, 118484 (2019) [CrossRef] [Google Scholar]
- Y. H. Liu, S. Y. Tsai, and C. C. Wang, Appl. Therm. Eng. 75, 289 (2015) [CrossRef] [Google Scholar]
- P. Gil, J. Wilk, and M. Korzeniowski, Appl. Sci. 11, 5666 (2021) [CrossRef] [Google Scholar]
- M. M. Kanase, L. D. Mangate, and M. B. Chaudhari, J. Low Freq. Noise Vib. Act. Control 37, 31 (2018) [CrossRef] [Google Scholar]
- F. Xu, Z. Gao, X. Ming, L. Xia, Y. Wang, W. Sun, and R. Ma, Exp. Therm. Fluid Sci. 64, 94 (2015) [CrossRef] [Google Scholar]
- P. Wang and C. Shen, J. Zhejiang Univ. Sci. A 20, 701 (2019) [CrossRef] [Google Scholar]
- Q. Xia and S. Zhong, Flow Meas. Instrum. 53, 308 (2017) [CrossRef] [Google Scholar]
- P. Gil, E3S Web Conf. 100, 00017 (2019) [CrossRef] [EDP Sciences] [Google Scholar]
- P. K. Singh, S. K. Sahu, P. K. Upadhyay, and S. Singh, Exp. Heat Transf. 00, 1 (2021) [Google Scholar]
- Z. Hao, G. Liu, W. Ren, Y. Wang, and H. Bie, J. Appl. Fluid Mech. 14, 1053 (2021) [Google Scholar]
- P. Salunkhe, Y. Wu, and H. Tang, J. Fluids Eng. Trans. ASME 142, 1 (2020) [CrossRef] [Google Scholar]
- A. Mahboubidoust, A. Ramiar, and M. Dardel, Theor. Appl. Mech. Lett. 7, 185 (2017) [CrossRef] [Google Scholar]
- L. Geng, Z. Hu, and Y. Lin, Ocean Eng. 176, 84 (2019) [CrossRef] [Google Scholar]
- C. Tang, W. Ma, B. Li, M. Jin, and H. Chen, Adv. Eng. Mater. 1901130, 1 (2019) [Google Scholar]
- M. Krieg and K. Mohseni, IEEE J. Ocean. Eng. 33, 123 (2008) [CrossRef] [Google Scholar]
- M. Chiatto, F. Capuano, G. Coppola, and L. De Luca, Sensors 17, 1216 (2017) [CrossRef] [Google Scholar]
- M. H. Hong, S. Y. Cheng, and S. Zhong, Phys. Fluids 32, 031301 (2020) [CrossRef] [Google Scholar]
- A. H. Ariffin and K. A. Ahmad, J. Adv. Res. Fluid Mech. Therm. Sci. 72, 103 (2020) [CrossRef] [Google Scholar]
- A. Arshad, M. Jabbal, and Y. Yan, Int. J. Heat Mass Transf. 146, 118815 (2020) [CrossRef] [Google Scholar]
- M. Ikhlaq, M. Yasir, M. Demiroplu, and M. Arik, in IEEE Trans. Components, Packag. Manuf. Technol. (2021), pp. 1156–1170 [CrossRef] [Google Scholar]
- P. Sharma, P. K. Singh, S. K. Sahu, and H. Yadav, A Critical Review on Flow and Heat Transfer Characteristics of Synthetic Jet (Springer Singapore, 2021) [Google Scholar]
- H. Zong, M. Chiatto, M. Kotsonis, and L. de Luca, Actuators 7, 77 (2018) [CrossRef] [Google Scholar]
- R. Mahalingam, Annu. IEEE Semicond. Therm. Meas. Manag. Symp. 196 (2007) [CrossRef] [Google Scholar]
- P. K. Singh, S. K. Sahu, and P. K. Upadhyay, Exp. Heat Transf. 1 (2020) [Google Scholar]
- International Organization for Standardization (ISO), EN ISO 9241-6:2002. Ergonomic Requirements for Office Work with Visual Display Terminals (VDTs) -Part 6: Guidance on the Work Environment (ISO 9241-6:1999) (ISO: Geneva, Switzerland, 1999), p. 32 [Google Scholar]
- M. Arik, Appl. Therm. Eng. 27, 1483 (2007) [CrossRef] [Google Scholar]
- C. J. M. Lasance, R. M. Aarts, and O. Ouweltjes, in 2008 Twenty-Fourth Annu. IEEE Semicond. Therm. Meas. Manag. Symp. (2008), pp. 26–31 [CrossRef] [Google Scholar]
- U. S. Bhapkar, A. Srivastava, and A. Agrawal, Int. J. Therm. Sci. 74, 145 (2013) [CrossRef] [Google Scholar]
- U. S. Bhapkar, A. Srivastava, and A. Agrawal, Int. J. Heat Mass Transf. 79, 12 (2014) [CrossRef] [Google Scholar]
- L. D. Mangate and M. B. Chaudhari, Int. J. Therm. Sci. 89, 100 (2015) [CrossRef] [Google Scholar]
- M. Jabbal and J. Jeyalingam, Sensors Actuators, A Phys. 266, 273 (2017) [CrossRef] [Google Scholar]
- J. Jeyalingam and M. Jabbal, Sensors Actuators, A Phys. 280, 52 (2018) [CrossRef] [Google Scholar]
- E. Smyk, P. Gil, R. Gałek, and Ł. Przeszłowski, Actuators 9, 100 (2020) [CrossRef] [Google Scholar]
- E. Smyk, J. Wilk, and M. Markowicz, Appl. Sci. 11, 4600 (2021) [CrossRef] [Google Scholar]
- E. Smyk and M. Markowicz, Appl. Sci. 11, 652 (2021) [CrossRef] [Google Scholar]
- E. Smyk, Appl. Sci. 11, 9624 (2021) [CrossRef] [Google Scholar]
- P. Gil, E. Smyk, R. Gałek, and Ł. Przeszłowski, Int. J. Therm. Sci. 170, 107171 (2021) [CrossRef] [Google Scholar]
- M. Ikhlaq, M. Yasir, O. Ghaffari, and M. Arik, Exp. Heat Transf. (2021) [Google Scholar]
- International Organization for Standardization (ISO), Acoustics — Determination of Sound Power Levels and Sound Energy Levels of Noise Sources Using Sound Pressure — Survey Method Using an Enveloping Measurement Surface over a Reflecting Plane (ISO 3746:2010) (ISO: Geneva, Switzerland, 2010), p. 48 [Google Scholar]
- C. K. W. Tarn and L. Auriault, 4th AIAA/CEAS Aeroacoustics Conf. 37, 880 (1998) [Google Scholar]
- J. Kordík and Z. Trávníček, Exp. Therm. Fluid Sci. 86, 281 (2017) [CrossRef] [Google Scholar]
- H. Xia, P. G. Tucker, and S. Eastwood, Int. J. Heat Fluid Flow 30, 1067 (2009) [CrossRef] [Google Scholar]
- M. Sadeghian and M. G. Bandpy, J. Aeronaut. Aerosp. Eng. 9, (2020) [Google Scholar]
- C. M. Crispo, C. S. Greco, and G. Cardone, Int. J. Heat Mass Transf. 126, 969 (2018) [CrossRef] [Google Scholar]
- C. M. Crispo, C. S. Greco, F. Avallone, and G. Cardone, Exp. Therm. Fluid Sci. 82, 136 (2017) [CrossRef] [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.