Open Access
MATEC Web Conf.
Volume 335, 2021
14th EURECA 2020 – International Engineering and Computing Research Conference “Shaping the Future through Multidisciplinary Research”
Article Number 03009
Number of page(s) 17
Section Mechanical Engineering
Published online 25 January 2021
  1. I. Fortelný, D. Michálková, Z. Kruliš, Polym. Degrad. Stab. 85, 975-979 (2004) [CrossRef] [Google Scholar]
  2. T. Takoungsakdakun, S. Pongstabodee, Sep. Purif. Technol., 54, 248-252 (2007) [CrossRef] [Google Scholar]
  3. R.M.C. Santana, G. Gondim, J. Appl. Polym. Sci., 112, 1454-1460, (2009) [CrossRef] [Google Scholar]
  4. R. Saidur, M. Hasanuzzaman, M.A. Sattar, H.H. Masjuki, M. Irfan Anjum, A.K.M. Mohiuddin, Int. J. Mech. Mater. Eng., 2, 84-92, (2007) [Google Scholar]
  5. J. Aurrekoetxea, M.A. Sarrionandia, I. Urrutibeascoa, M.L. Maspoch, J. Mater. Sci., 36, 2607-2613, (2001) [CrossRef] [Google Scholar]
  6. P. Santos, S.H. Pezzin, J. Mater. Process. Technol., 143–144, 517-520 (2003) [CrossRef] [Google Scholar]
  7. C. Shen, L. Wang, W. Cao, L. Qian, Polym. - Plast. Technol. Eng., 46, 219-225, (2007) [CrossRef] [Google Scholar]
  8. M.M. Wienaah. “Sustainable Plastic Waste Management – a Case of Accra, Ghana”. Internet : (2007) [Google Scholar]
  9. J. Hopewell, R. Dvorak, E. Kosior, Philos. Trans. R. Soc., 364, 2115-2126 (2009) [CrossRef] [Google Scholar]
  10. Delgado C., Stenmark A. “Setting-up of European Virtual Institute for Recycling - ‘Virtual European Recycling Centre’. GTC1-2001-43018. VERC Deliverable report”. Internet: (2005) [Google Scholar]
  11. A. Sutar, H. Salunkhe, Int. J. Innov. Res. Creat. Technol., 1, 320-322 (2015) [Google Scholar]
  12. A. Tilmatine, K. Medles, M. Younes, A. Bendaoud, L. Dascalescu, IEEE Trans. Ind. Appl., 46, 1564-1569 (2010) [CrossRef] [Google Scholar]
  13. D. Teichmann, S. Masood, P. Iovenitti, I. Sharski, E. Kosior. “Development of High Performance Sorting Process for Recycling of Plastics”. Internet: file:///C:/Users/104225/Downloads/PDF%20(Published%20version).pdf (2002) [Google Scholar]
  14. B.L. Altland, D. Cox, R.M. Enick, E.J. Beckman, Resour. Conserv. Recycl., 15, 203-217 (1995) [CrossRef] [Google Scholar]
  15. Dynisco. “Materials and their Flow Properties”. Internet: [Google Scholar]
  16. N. Fourati, N. Blel, Y. Lattach, N. Ktari, C. Zerrouki, Reference module in materials science and materials engineering (Elsevier, 2016) [Google Scholar]
  17. Tinius Olsen. “Measuring Mass Flow Rate (MFR) and Other Polymer Properties”. Internet: (2008) [Google Scholar]
  18. B. Sriharsha, P.S. Rao, International Journal of Technical Innovation in Modern Engineering & Science (IJTIMES), 4, 568-572 (2018) [Google Scholar]
  19. J. Vasco, C. Capela, P. Bartolo, D. Granja. “Material Selection for High Performance Molds”. Internet: (2007) [Google Scholar]
  20. S.O. Onuh, Y.Y. Yusuf, J. Intell. Manuf., 10, 301-311 (1999) [Google Scholar]
  21. A. Riley, Plastics manufacturing processes for packaging materials (Woodhead Publishing Limited, UK, 2012) [Google Scholar]
  22. 3DHubs. “Injection molding: The definitive engineering guide”. Internet: [Google Scholar]
  23. RTP Co., “Part Design Guidelines for Injection Molded Thermoplastics”. Internet: [Google Scholar]
  24. G. Cao, H Awbi, R Yan, Y Fan, K Siren, R Kosonen, J Zhang., Build. Environ., 73, 171-186 (2014) [CrossRef] [Google Scholar]
  25. D. Müller, C. Kandzia, R. Kosonen, A.K. Melikov, P. Vilhelm Nielsen, Mixing Ventilation - Guide on Mixing Air Distribution Design REHVA Guidebook 19, (REHVA, 2013) [Google Scholar]
  26. H. Skistad, E. Mundt, P.V. Nielsen, K. Hagström, J. Railio, Displacement ventilation in non-industrial premises REHVA Guidebook 1, (REHVA, 2004) [Google Scholar]
  27. Y. Cho, H.B. Awbi, T. Karimipanah, Build. Environ., 43, 1091-1100 (2008) [CrossRef] [Google Scholar]
  28. G.J. Poitras, A. Babineau, G. Roy, L.E. Brizzi, Int. J. Therm. Sci., 114, 184-195 (2017) [CrossRef] [Google Scholar]
  29. T. Karimipanah, H.B. Awbi, B. Moshfegh, J. Human-Environment Syst., 11, 77-84 (2008) [CrossRef] [Google Scholar]
  30. H.B. Awbi, Energy Procedia, 112, 277-286 (2017) [CrossRef] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.