Open Access
MATEC Web Conf.
Volume 307, 2020
International Conference on Materials & Energy (ICOME’17 and ICOME’18)
Article Number 01025
Number of page(s) 6
Published online 10 February 2020
  1. F. Belaïd, Untangling the complexity of the direct and indirect determinants of the residential energy consumption in France: Quantitative analysis using a structural equation modeling approach, Energy Policy. 110 (2017) 246–256. doi:10.1016/j.enpol.2017.08.027. [Google Scholar]
  2. European Parliament, Directive 2010/31/EU of the European Parliament and of the Council of 19 May 2010 on the energy performance of buildings, Off. J. Eur. Union. (2010) 13–35. doi:10.3000/17252555.L_2010.153.eng. [Google Scholar]
  3. ANSI/ASHRAE, Thermal Environmental Conditions for Human Occupancy Standard 55-2013, Ashrae. (2013). doi:ISSN 1041-2336. [Google Scholar]
  4. P.O. Fanger, Thermal comfort. Analysis and applications in environmental engineering., New York Mcgraw-Hill. (1972). [Google Scholar]
  5. ISO, ISO 7730: Ergonomics of the thermal environment Analytical determination and interpretation of thermal comfort using calculation of the PMV and PPD indices and local thermal comfort criteria, Management. 3 (2005) 605–615. doi:10.1016/j.soildyn.2004.11.005. [Google Scholar]
  6. M. Taleghani, M. Tenpierik, S. Kurvers, A. Van Den Dobbelsteen, A review into thermal comfort in buildings, Renew. Sustain. Energy Rev. 26 (2013) 201–215. doi:10.1016/j.rser.2013.05.050. [CrossRef] [Google Scholar]
  7. J. Van Hoof, Forty years of Fanger’s model of thermal comfort: Comfort for all?, Indoor Air. 18 (2008) 182–201. doi:10.1111/j.1600-0668.2007.00516.x. [CrossRef] [PubMed] [Google Scholar]
  8. N.M. Mateus, A. Pinto, G.C. Da Graça, Validation of EnergyPlus thermal simulation of a double skin naturally and mechanically ventilated test cell, Energy Build. (2014). doi:10.1016/j.enbuild.2014.02.043. [Google Scholar]
  9. S.E. Ouldboukhitine, R. Belarbi, D.J. Sailor, Experimental and numerical investigation of urban street canyons to evaluate the impact of green roof inside and outside buildings, Appl. Energy. (2014). doi:10.1016/j.apenergy.2013.09.073. [Google Scholar]
  10. S. Bontemps, L. Mora, Holzkirchen house modelling using modelica buildings library and comparison with measurments, in: 14th Conf. Int. Build. Perform. Simul. Assoc., Hyderabad, India, n.d. [Google Scholar]
  11. P.O. Fanger, Thermal comfort: Analysis and applications in environmental engineering, 1970. [Google Scholar]
  12. MEDDE, Réglementation thermique 2012 : un saut énergétique pour les bâtiments neufs, 2011. [Google Scholar]
  13. W. Makondo, A. Merabtine, S. Pincemin, J. Podlecki, R. Garcia, Capteur multifonctions pour l ’ évaluation du confort thermique dans les bâtiments, in: Congrès Fr. Therm., La Rochelle, France, 2015. [Google Scholar]
  14. M. Wetter, W. Zuo, T.S. Nouidui, Modeling of Heat Transfer in Rooms in the Modelica “Buildings” Library, Proc. Build. Simul. 2011 12th Conf. Int. Build. Perform. Simul. Assoc. (2011) 1096–1103. [Google Scholar]
  15. M. Wetter, W. Zuo, T.S. Nouidui, X. Pang, Modelica Buildings library, J. Build. Perform. Simul. 7 (2014) 253–270. doi:10.1080/19401493.2013.765506. [CrossRef] [Google Scholar]
  16. M. Wetter, W. Zuo, T.S. Nouidui, Recent Developments of the Modelica “Buildings” Library for Building Energy and Control Systems, in: Model. Conf., 2011: pp. 266–275. doi:10.3384/ecp11063266. [CrossRef] [Google Scholar]
  17. ASHRAE, ASHRAE Standard 55-2013 Thermal Environmental Conditions for Human Occupancy, 2013. doi:ISSN 1041-2336. [Google Scholar]
  18. Cen, EN 15251: Indoor environmental input parameters for design and assessment of energy performance of buildings- addressing indoor air quality, thermal environment, lighting and acoustics, Eur. Comm. Stand. 3 (2007) 1–52. doi:10.1520/E2019-03R13.Copyright. [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.