Open Access
Issue |
MATEC Web Conf.
Volume 264, 2019
2nd International Conference on Composite Material, Polymer Science and Engineering (CMPSE2018)
|
|
---|---|---|
Article Number | 03002 | |
Number of page(s) | 6 | |
Section | Product Manufacturing (Recycle, Material Process, Machining) | |
DOI | https://doi.org/10.1051/matecconf/201926403002 | |
Published online | 30 January 2019 |
- M. Asato, T. Mizuno, T. Hoshino, and H.Sawada, Mater. Trans. 42 (2001), 2216–2224 [CrossRef] [Google Scholar]
- T. Hoshino, M. Asato, R. Zeller, and P. H. Dederichs, Phys. Rev. B 70 (2004), 094118(1-7) [CrossRef] [Google Scholar]
- T. Hoshino, M. Asato, S. Tanaka, F. Nakamura and N. Fujima, Intermetallics 14 (2006), 913–916 [CrossRef] [Google Scholar]
- F. Nakamura, T. Hoshino, S. Tanaka, K. Hirose, S. Hirosawa, and T. Sato, Trans. Mat. Res. Soc. Japan 30 (2005), 873–876 [Google Scholar]
- M. Asato, H. Takahashi, T. Inagaki, N. Fujima, R. Tamura, and T. Hoshino, Mater. Tran. 48 (2007), 1711–1716 [CrossRef] [Google Scholar]
- T. Hoshino, W. Schweika, R. Zeller, and P. H. Dederichs, Phys. Rev. B 47 (1993), 5106–5117 [CrossRef] [Google Scholar]
- T. Hoshino, M. Asato, N. Fujima, J. Alloy. Compd. 504S (2010), S534–S537 [CrossRef] [Google Scholar]
- M. Asato, A. Settles, T. Hoshino, T. Asada, S. Blügel, R. Zeller, and P. H. Dederichs, Phys. Rev. B 60 (1999), 5202–5510 [CrossRef] [Google Scholar]
- T. Hoshino, M. Asato, T. Mizuno, and H. Fukushima, Mater. Trans. 42 (2001), 2206–2215 [CrossRef] [Google Scholar]
- T. B. Massalski, H. Okamoto, P. R. Subramanian, and L. Kacprazak: Binary Alloys Phase Diagrams, 2nd.ed., (ASM International, New York, 1990. [Google Scholar]
- C. Liu, M. Asato, N. Fujima, T. Hoshino, Y. Chen, and T. Mohri, Mater. Trans. 59 (2018), 338–347 [CrossRef] [Google Scholar]
- C. Liu, M. Asato, N. Fujima, T. Hoshino, Y. Chen, and T. Mohri, Mater. Trans. 59 (2018), 883–889 [CrossRef] [Google Scholar]
- M. Asato, C. Liu, N. Fujima, T. Hoshino, Y. Chen, and T. Mohri, World Academy of Science, Engineering and Technology International Journal of Materials and Metallurgical Engineering Vol. 12, No.3, 119–123 (2018) [Google Scholar]
- C. Liu, M. Asato, N. Fujima, T. Hoshino, Y. Chen, and T. Mohri, Mater. Trans. 59 (2018), 1669–1676 [CrossRef] [Google Scholar]
- R. Zeller, Phys. Rev. B 55 (1997), 9400–9408 [CrossRef] [Google Scholar]
- R. Zeller, M. Asato, T. Hoshino, J. Zalbloudil, P. Weinberger, and P. H. Dederichs, Philos. Mag. B 78 (1998), 417–422 [CrossRef] [Google Scholar]
- K. Wildberger, P. Lang, R. Zeller, and P. H. Dederichs, Phys. Rev. B 52 (1995), 11502–11508 [CrossRef] [Google Scholar]
- S. Hirosawa, F. Nakamura, T. Sato, and T. Hoshino, J. Jpn. Inst. Light Met. 56 (2006), 621–628 [CrossRef] [Google Scholar]
- J. Kim, F. Kobayashi, and T. Sato : Mater. Trans. 52 (2011), 906–913 [CrossRef] [Google Scholar]
- T. Hoshino, R. Zeller, P.H. Dederichs and T. Asada, Computational Physics as a New Frontier in Condensed Material Research, Ed. By H. Takayama, et al, Physical Society of Japan, Tokyo, (1995), pp. 105–113 [Google Scholar]
- W. Schweika, Disordered Alloys: Diffuse Scattering and Monte Carlo Simulations, (Springer Tracts in Modern Physics 141, 1998), pp. 51–57 [Google Scholar]
- S. Hirosawa and T. Sato : J. Jpn. Inst. Light Met. 54 (2004), 121–127 [Google Scholar]
- K. Sato, H. Katayam-Yoshida, and P. H. Dederichs : Jpn. J. Appl. Phys. 44 (2005), L948–L951 [CrossRef] [Google Scholar]
- T. Diel, K. Sato, T. Fukushima, A. Bonnani, M. Jamet, A. Barski, M .Tanaka, P. H. Hai, and H. Katayama-Yoshida, Rev. Mod. Phys. 87 (2015), 1311–1377 [CrossRef] [Google Scholar]
- P. Lang, L. Nordstrom, K. Wildberger, R. Zeller, P. H. Dederichs, and T. Hoshino, Phys. Rev. B 53 (1996), 9092–9107 [CrossRef] [Google Scholar]
- T. Hoshino, N. Fujima, M. Asato, and H. Tatsuoka : J. Alloys Compd. 504 (2010), S531–S533 [CrossRef] [Google Scholar]
- C. Kittel : Introduction to Solid State Physics, 7thed., (Jhon & Wiley Sons. Inc. New York, 1996), see Table 9. [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.