Open Access
| Issue |
MATEC Web Conf.
Volume 254, 2019
XXIII Polish-Slovak Scientific Conference on Machine Modelling and Simulations (MMS 2018)
|
|
|---|---|---|
| Article Number | 01004 | |
| Number of page(s) | 8 | |
| Section | Methods and Systems in Machine Design | |
| DOI | https://doi.org/10.1051/matecconf/201925401004 | |
| Published online | 15 January 2019 | |
- F.M. Feldhaus, Maszyny w dziejach ludzkości. (PWN 1958) [Google Scholar]
- D. Wojtkowiak, K. Talaśka, I. Malujda, G. Domek, Analysis of the influence of the cutting edge geometry on parameters of the perforation process for conveyor and transmission belts. MATEC Web of Conferences, Vol. 157, art. No 010222018, (2018) [Google Scholar]
- M. Kujawski, P. Krawiec, Analysis of Generation Capabilities of Noncircular Cog belt Pulleys on the Example of a Gear with an Elliptical Pitch Line, Journal of Manufacturing Science and Engineering-Transactions of the ASME 133(5), Article Number: 051006 (2011) [CrossRef] [Google Scholar]
- J. Flizikowski, M. Macko, Method of estimation of efficiency of quasi-cutting of recycled opto-telecommunication pipes, Polymers, tom XLVI, s. 53-59 (2001) [Google Scholar]
- K. Wałęsa, I. Malujda, K. Talaśka, Butt welding of round drive belts. Acta Mechanica et Automatica 12 (2), 115-26 (2018) [CrossRef] [Google Scholar]
- S. Medvecká-Beňová, Meshing Condition and Kinematic Properties of non-circular GearActa. Mechanica Slovaca 20 (2), 16-21 (2016) [Google Scholar]
- P. Krawiec, A. Marlewski, Profile design of noncircular belt pulleys. Journal of Theoretical and Applied Mechanics, 54 (2), 561-570 (2016) [CrossRef] [Google Scholar]
- F. Zheng, X. Guo, M. Zhang Non-uniform flank rolling measurement for shaped noncircular gears, Measurement 207-215 116 (2018) [CrossRef] [Google Scholar]
- G. Domek, A. Kołodziej, M. Dudziak, T. Woźniak Identification of the quality of timing belt pulleys, Procedia Engineering, Vol. 177, 275-280 (2017) [CrossRef] [Google Scholar]
- S. Wojciechowski, Machined surface roughness including cutter displacements in milling of hardened steel, Metrology and Measurement Systems Vol. XVIII (3), 429 –440 (2011) [Google Scholar]
- M. Vaško, M. Blatnický, P. Kopas, M. Sága, Badanie trwałości zmęczeniowej spoin spawanych stopu aluminium AlMgSi07.F25 pod cyklicznym obciążeniem skrętno-skrętnym. Metalurgija 56 (1–2), 94-98 (2017) [Google Scholar]
- P. Kopas, M. Blatnický, M. Sága, M. Vaško, Identyfikacja właściwości mechanicznych złączy spawanych stopu aluminium AlMgSi07.F25. Metalurgija 56 (1-2), 99-102 (2017) [Google Scholar]
- M. Sága, P. Kopas, M. Uhríčik, Modelowanie i analiza doświadczalna uszkodzeń zmęczeniowych stopu aluminium w przypadku zginania obciążenie skrętne. Procedia Engineering 48, 599-606 (2012) [CrossRef] [Google Scholar]
- P. Krawiec, Numerical Analysis of Geometrical Characteristics of Machine Elements Obtained Through CMM Scanning, Progress in Industrial Mathematics, Springer-Verlag, Berlin–Heidelberg, 925-930 (2010) [Google Scholar]
- P. Krawiec, G. Domek, Ł. Warguła, K. Waluś, J. Adamiec The application of the optical system ATOS II for rapid prototyping methods of non-classical models of cogbelt pulleys. MATEC Web of Conferences, Vol. 157, art. no 01010 (2018) [Google Scholar]
- P. Krawiec, M. Grzelka, J. Kroczak, G. Domek, A. Kołodziej, A proposal of measurement methodology and assessment of manufacturing methods of nontypical cog belt pulleys, Measurement, 132, 182-190 (2019) [CrossRef] [Google Scholar]
- R. Majchrowski, M. Grzelka, M. Wieczorowski, Ł. Sadowski, B. Gapiński, Large area concrete surface topography measurements using optical 3D scanner, Metrology and Measurement Systems., Vol. XXII, (4), 565-576 (2015) [CrossRef] [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.