Open Access
Issue |
MATEC Web Conf.
Volume 218, 2018
The 1st International Conference on Industrial, Electrical and Electronics (ICIEE 2018)
|
|
---|---|---|
Article Number | 04005 | |
Number of page(s) | 6 | |
Section | Industrial And Engineering Applications | |
DOI | https://doi.org/10.1051/matecconf/201821804005 | |
Published online | 26 October 2018 |
- Marcia McNutt, “Climate Change Impacts,” vol. 341. [Google Scholar]
- Y. Liu, Q. Sun, J. Liu, S. Wang, and J. Feng, “Effect of axial external magnetic fi eld on cold metal transfer welds of aluminum alloy and stainless steel,” Mater. Lett., vol. 152, no. 2, pp. 29–31, 2015. [CrossRef] [Google Scholar]
- P. Xue, D. R. Ni, D. Wang, B. L. Xiao, and Z. Y. Ma, “Effect of friction stir welding parameters on the microstructure and mechanical properties of the dissimilar Al – Cu joints,” vol. 528, pp. 4683–4689, 2011. [Google Scholar]
- J. M. Piccini and H. G. Svoboda, “Effect of pin length on Friction Stir Spot Welding (FSSW) of dissimilar Aluminum-Steel joints,” Procedia Mater. Sci., vol. 9, pp. 504–513, 2015. [CrossRef] [Google Scholar]
- H. Bisadi, A. Tavakoli, M. T. Sangsaraki, and K. T. Sangsaraki, “The influences of rotational and welding speeds on microstructures and mechanical properties of friction stir welded Al5083 and commercially pure copper sheets lap joints,” J. Mater., vol. 43, pp. 80–88, 2013. [Google Scholar]
- J. Peng, S. Fukumoto, L. Brown, and N. Zhou, “Image analysis of electrode degradation in resistance spot welding of aluminium,” vol. 9, no. 4, pp. 331–336, 2004. [Google Scholar]
- M. P. Mubiayi and E. T. Akinlabi, “Friction Stir Spot Welding between Copper and Aluminium : Microstructural Evolution,” vol. II, 2015. [Google Scholar]
- X. Liu, S. Lan, and J. Ni, “Analysis of process parameters effects on friction stir welding of dissimilar aluminum alloy to advanced high strength steel,” Mater. Des., vol. 59, pp. 50–62, 2014. [CrossRef] [Google Scholar]
- K. P. Babu, S., Sankar, V. S., Ram, G. J., Venkitakrishnan, P. V., Reddy, G. M., & Rao, “Microstructures and mechanical properties of friction stir spot welded aluminum alloy AA2014,” J. Mater. Eng. Perform., vol. 71–84, 2013. [CrossRef] [Google Scholar]
- G. Buffa, P. Fanelli, L. Fratini, and F. Vivio, “Influence of joint geometry on micro and macro mechanical properties of friction stir spot welded joints,” Procedia Eng., vol. 81, no. October, pp. 2086–2091, 2014. [CrossRef] [Google Scholar]
- W. Li, J. Li, Z. Zhang, D. Gao, W. Wang, and C. Dong, “Improving mechanical properties of pinless friction stir spot welded joints by eliminating hook defect,” Mater. Des., vol. 62, pp. 247–254, 2014. [CrossRef] [Google Scholar]
- S. Z. Badarinarayan, H., Q. Yang, “Effect of tool geometry on static strength of friction stir spot-welded aluminum alloy,” Int. J. Mach. Tools Manuf. 49.2, vol. 142–148, 2009. [Google Scholar]
- A. Buffa, G., Campanile, G., Fratini, L., & Prisco, “Friction stir welding of lap joints: Influence of process parameters on the metallurgical and mechanical properties,” Mater. Sci. Eng., vol. 19–26, 2009. [Google Scholar]
- J. Y. Cao, M. Wang, L. Kong, and L. J. Guo, “Hook formation and mechanical properties of friction spot welding in alloy 6061-T6,” J. Mater. Process. Technol., vol. 230, pp. 254–262, 2016. [CrossRef] [Google Scholar]
- M. Miyagawa, K., Tsubaki, M., Yasui, T., Fukumoto, “Spot Welding between Aluminum Alloy and Zn Coated Steel by Friction Stirring,” J. Japan Inst. Light Met. 23, pp. 131–136, 2008. [Google Scholar]
- J. M. Piccini and H. G. Svoboda, “Effect of the tool penetration depth in Friction Stir Spot Welding (FSSW) of dissimilar aluminum alloys,” Procedia Mater. Sci., vol. 8, pp. 868–877, 2015. [CrossRef] [Google Scholar]
- R. Z. Xu, D. R. Ni, Q. Yang, C. Z. Liu, and Z. Y. Ma, “Journal of Materials Science & Technology Pinless Friction Stir Spot Welding of Mg – 3Al – 1Zn Alloy with Zn Interlayer,” vol. 32, pp. 76–88, 2016. [Google Scholar]
- S. Lazarevic, S. F. Miller, J. Li, and B. E. Carlson, “Experimental analysis of friction stir forming for dissimilar material joining application,” J. Manuf. Process., vol. 15, no. 4, pp. 616–624, 2013. [CrossRef] [Google Scholar]
- R. Z. Xu, D. R. Ni, Q. Yang, C. Z. Liu, and Z. Y. Ma, “Influencing mechanism of Zn interlayer addition on hook defects of friction stir spot welded Mg – Al – Zn alloy joints,” vol. 69, pp. 163–169, 2015. [Google Scholar]
- S. Hirasawa, H. Badarinarayan, K. Okamoto, T. Tomimura, and T. Kawanami, “Analysis of effect of tool geometry on plastic flow during friction stir spot welding using particle method,” J. Mater. Process. Technol., vol. 210, no. 11, pp. 1455–1463, 2010. [CrossRef] [Google Scholar]
- P. Su, A. Gerlich, T. H. North, and G. J. Bendzsak, “Intermixing in Dissimilar Friction Stir Spot Welds,” Metall. Mater. Trans. A, vol. 38, no. 3, pp. 584–595, 2007. [CrossRef] [Google Scholar]
- S. S. Yin, Y. H., Sun, N., North, T. H., & Hu, “Influence of tool design on mechanical properties of AZ31 friction stir spot welds,” Sci. Technol. Weld. Joining., 2013. [Google Scholar]
- M. K. Bilici and A. I. Yükler, “Influence of tool geometry and process parameters on macrostructure and static strength in friction stir spot welded polyethylene sheets,” Mater. Des., vol. 33, no. 1, pp. 145–152, 2012. [CrossRef] [Google Scholar]
- V. Malik, N. K. Sanjeev, H. S. Hebbar, and S. V. Kailas, “Investigations on the effect of various tool pin profiles in friction stir welding using finite element simulations,” Procedia Eng., vol. 97, pp. 1060–1068, 2014. [CrossRef] [Google Scholar]
- R. Z. Xu, D. R. Ni, Q. Yang, C. Z. Liu, and Z. Y. Ma, “Influence of Zn interlayer addition on microstructure and mechanical properties of friction stir welded AZ31 Mg alloy,” J. Mater. Sci., pp. 4160–4173, 2015. [Google Scholar]
- P. Xue, D. R. Ni, D. Wang, B. L. Xiao, and Z. Y. Ma, “Effect of friction stir welding parameters on the microstructure and mechanical properties of the dissimilar Al-Cu joints,” Mater. Sci. Eng. A, vol. 528, no. 13–14, pp. 4683–4689, 2011. [CrossRef] [Google Scholar]
- A. Boucherit and R. Taillard, “AC PT,” Mater. Des., vol. 124, pp. 87–99, 2017. [CrossRef] [Google Scholar]
- O. Lorrain, V. Favier, H. Zahrouni, and D. Lawrjaniec, “Understanding the material flow path of friction stir welding process using unthreaded tools,” J. Mater. Process. Technol., vol. 210, no. 4, pp. 603–609, 2010. [CrossRef] [Google Scholar]
- Y. C. Lin, J. J. Liu, and J. N. Chen, “Material flow tracking for various tool geometries during the friction stir spot welding process,” J. Mater. Eng. Perform., vol. 22, no. 12, pp. 3674–3683, 2013. [CrossRef] [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.