Open Access
MATEC Web Conf.
Volume 208, 2018
2018 3rd International Conference on Measurement Instrumentation and Electronics (ICMIE 2018)
Article Number 03010
Number of page(s) 6
Section Modern Electronic System & Measurement and Control Technology
Published online 26 September 2018
  1. Zhong Jin’an. Research on Ultrasonic Machining gap Online Measurement and control[J]. Chinese Journal of Instrument. 2002(6).vol.23. [Google Scholar]
  2. Song Zhen. Simulation Research on the Establishment of ultrasonic vibration cutting system and horn performance. Master Proceedings of Harbin Institute of Technology[C]. 2006.6:1–12. [Google Scholar]
  3. Luo Yue, Zhang Mingjun, Kong Jinxing. Design on Ultrasonic Vibration Turning Device. Teaching and Technology[J]. 2005(J). [Google Scholar]
  4. Yang Yanglin, Yu Xingzhi, Zhang Chengguang. Application of Ultrasonic Machining Technology. Modern Machinery[J].2009. [Google Scholar]
  5. Hu Chuanxin, Huang Yan, The Research of Fuzzy Control Method Based on Self-Adjusting Rules. Master Thesis of Shantou Uninversity[C]. 2003. [Google Scholar]
  6. Feng Dongjv. A Simple Measurement of Tool Amplitude for Ultrasonic CNC machining. Electrical Processing and Model[J]. 2004(5). [Google Scholar]
  7. Zhang Li, Li Zhong, Liu Yanquan. Expert Self-tuning Fuzzy Control System. Chinese Journal of Scientific Instrument [J]. 2004(3):34–37. [Google Scholar]
  8. Li Zhuxin. A Double Model Controller with Self-adjusting Base Sets Using Fussy Switching Based on Fussy Rules. Journal of Yunnan University[J]. 2003(4):313–316. [Google Scholar]
  9. Hu Chuanxin. Special Processing Handbook[M]. Beijing University of Technology Press. 2011. [Google Scholar]
  10. Feng Dongqing, etc. Design of PID-Controller with Fuzzy Self-adjusting Parameter and Its Robustness Analysis. Proceedings of Progress of Computer Technology and Applicationin the 18th CACIS[C]. 2007. [Google Scholar]
  11. Fang GenSun, Long JingFan. N-widths on the classes of multivariate bandlimited unctions.Progressin Natural Science.2004, (10):863–866. [CrossRef] [Google Scholar]
  12. D.M. Alter, etc. Control of Linear Motors for Machine Tool Feed DrivesDesign and Implementation of H∞ Optimal Feedback Control.Journal of Dynamic Systems.Measurement and control, 1996, (1):18. [Google Scholar]
  13. T.H. Lee, etc.Intelligent Control of Precision Linear Actuators.Engineering Applications of Artifical Inteligence.2000, (13):671–684 [CrossRef] [Google Scholar]
  14. David M. Alter, etc.Control of Linear Motors for Machine Tool Feed Drives Experimental Investigation of Optimal Feed-forward Tracking Control.Journal of Dynamic System, Measurement and Control.1998, (3):221–225 [Google Scholar]
  15. Velthuis, etc.Experimental Verification of the Stability Analysis of Learning Feed-Forward Control.Proceedings of the IEEE Conference on Decision and control. 1998, (2): 1225–1229 [Google Scholar]
  16. Bassi, etc.Force Disturbance Compensation for An A.C.Brushless Linear Motor.IEEE International Symposium on Industrial Electronics.1999, (3): 1350–1354 [Google Scholar]
  17. Su Li, etc.Adaptive Robust Precision Motion Control of Linear Motors with Negligible Electrical Dynamics Theory and Experiments.Proceeding of the American Control Conference.IEEE, Piscataway,NJ,USA,OOCB36334.2000,4: 2583–2587 [Google Scholar]
  18. Kim, etc. Robust Internal Loop Compensator Design for Motion Control of Precision Linear Motor. IEEE International Symposium on Industrial Electronics.1999, 3: 1045–1050. [Google Scholar]
  19. Layne J R, Passino K M. Fuzzy Model Reference Learning Control for a Cargo Ship Steering.IEEE Control Systems.1993:23–34 [Google Scholar]
  20. GC Goodwin, S F Graebe, M E Salgado. Control System Design.Prentice Hall,2001. [Google Scholar]
  21. Lennart Ljung. System Identification Toolbox User’s Guide.The MathWorks Inc,2001. [Google Scholar]
  22. Jean-Jacques E. Slotine. Applied Nonlinear Control.China Machine Press,2004. [Google Scholar]
  23. Wang Lei, Xiao Yun-shi, Wu Qi-di, Zhou Guo-Xing. Neural nerwork based parameters identification and adaptive speed control of AC drive system.P roceedings of the IEEE International conference on industrialte chnology,1996. [Google Scholar]
  24. D. Renton, etc. High Speed Servo Control Multi-axis Machine Tools. International Journal of Machine Tools & Manufacture.2000, (40): 539–559. [CrossRef] [Google Scholar]
  25. M. Gringel, etc.Machine Tool Design Requirements for High-Speed Machining. Annals of the CIRP.1996, (1):1–5. [Google Scholar]
  26. Kim, etc.Robust Internal Loop Compensator Design for Motion Control of Precision Linear Motor.IEEE International Symposium on Industrial Electronics.1999,3: 1045–1050. [Google Scholar]
  27. Lin C T and Lu Y C. Aneural fuzzy system with fuzzy supervised learning.IEEE Trans.Syst., Man and Cybem.1996, (5):744–763. [Google Scholar]
  28. Rajani K. Mudi and Nikhil R. Pal. A Robust Self-Tuning Scheme for PI-and PD-Type Fuzzy Controllers.IEEE Trans.Fuzzy Syst.1999, (7):3–16. [CrossRef] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.