Open Access
| Issue |
MATEC Web Conf.
Volume 208, 2018
2018 3rd International Conference on Measurement Instrumentation and Electronics (ICMIE 2018)
|
|
|---|---|---|
| Article Number | 03007 | |
| Number of page(s) | 5 | |
| Section | Modern Electronic System & Measurement and Control Technology | |
| DOI | https://doi.org/10.1051/matecconf/201820803007 | |
| Published online | 26 September 2018 | |
- O. Brüning, Large Hadron Collider Design Report. Geneva : CERN: European Organization for Nuclear Research, 20041. The LHC Main Ring. [Google Scholar]
- L. Evans and P. Bryant, “LHC machine”, Journal of Instrumentation, vol. 3, (08), pp. S08001, 2008. [CrossRef] [Google Scholar]
- N. Mokhov et al, “Tevatron beam halo collimation system: design, operational experience and new methods1”, Journal of Instrumentation, vol. 6, (08), pp. T08005, 2011. [CrossRef] [Google Scholar]
- W. Scandale et al, “The UA9 experimental layout”, Journal of Instrumentation, vol. 6, (10), pp. T10002, 2011. [CrossRef] [Google Scholar]
- G. Anelli et al, “The totem experiment at the cern large hadron collider”, Journal of Instrumentation, vol. 3, (08), pp. S08007, 2008. [Google Scholar]
- A. Danisi, “Simulation of DC interfering magnetic field effects on the LHC collimators’ LVDT positioning sensors”, M.Sc., Electronic Engineering Department, University of Naples” Federico II”, Naples, Italy, 2009. [Google Scholar]
- A. Masi et al, “Study of magnetic interference on an LVDT: FEM modelling and experimental measurements”, Journal of Sensors, vol. 2011, 2011. [CrossRef] [Google Scholar]
- M. Martino et al, “Design of a linear variable differential transformer with high rejection to external interfering magnetic field”, IEEE Trans. Magn., vol. 46, (2), pp. 674–677, 2010. [CrossRef] [Google Scholar]
- A. Masi and R. Losito, “LHC collimators low level control system”, IEEE Trans. Nucl. Sci., vol. 55, (1), pp. 333–340, 2008. [CrossRef] [Google Scholar]
- A. Danisi, “Ironless inductive position sensor for harsh magnetic environments”, 2013. [Google Scholar]
- A. Danisi et al, “Design optimization of an ironless inductive position sensor for the LHC collimators”, Journal of Instrumentation, vol. 8, (09), pp. P09005, 2013. [CrossRef] [Google Scholar]
- A. Grima et al, “Influence of External Conductive Objects on the Performance of an Ironless Inductive Position Sensor”, IEEE Sensors Journal, vol. 17, (14), pp. 4500–4507, 2017. [CrossRef] [Google Scholar]
- R. Assmann et al, “LHC collimation: Design and results from prototyping and beam tests”, in Particle Accelerator Conference, 2005. PAC 2005. Proceedings of The, 2005, pp. 1078–1080. [Google Scholar]
- T. Weiler et al, “LHC collimation system hardware commissioning”, in Particle Accelerator Conference, 2007. PAC. IEEE, 2007, pp. 1625–1627. [Google Scholar]
- S. Wu and J. Hong, “Five-point amplitude estimation of sinusoidal signals: With application to LVDT signal conditioning”, IEEE Transactions on Instrumentation and Measurement, vol. 59, (3), pp. 623–630, 2010. [CrossRef] [Google Scholar]
- M. Martino, R. Losito and A. Masi, “Analytical metrological characterization of the three-parameter sine fit algorithm”, ISA Trans., vol. 51, (2), pp. 262–270, 2012. [CrossRef] [Google Scholar]
- A. Danisi, “Ironless inductive position sensor for harsh magnetic environments”, 2013. [Google Scholar]
- A. Danisi, “Ironless Inductive Position Sensor for Harsh Magnetic Environments.”, École polytechnique fédérale de Lausanne, 2013. [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.