Open Access
Issue
MATEC Web Conf.
Volume 202, 2018
2018 International Conference on Aeronautical, Aerospace and Mechanical Engineering (AAME 2018)
Article Number 01001
Number of page(s) 5
Section Material Performance Testing and Analysis
DOI https://doi.org/10.1051/matecconf/201820201001
Published online 26 September 2018
  1. Zhang, Li, Zhang, Jinghuai, Leng, Zhe, Liu, Shujuan, Yang, Qiang, Wu, Ruizhi, and Zhang, Milin. “Microstructure and mechanical properties of high-performance Mg–Y–Er–Zn extruded alloy,” Materials & Design (1980-2015). 256, 54.(2014). [CrossRef] [Google Scholar]
  2. Wang, Qu Dong, Li, Da Quan, Li, Qiang, and Ding, Wen Jiang. “Effects of Er on Microstructure and Mechanical Properties of Mg-Zn-Er-Zr Magnesium Alloys,” Materials Science Forum. 105, 546–549.(2007). [CrossRef] [Google Scholar]
  3. Zhang, Jinyang, Xu, Min, Teng, Xinying, and Zuo, Min. “Effect of Gd addition on microstructure and corrosion behaviors of Mg–Zn–Y alloy,” Journal of Magnesium and Alloys. 319, 4.(2016). [CrossRef] [Google Scholar]
  4. Ma, Yutao, Zhang, Xingguo, Liu, Hongbin, and Meng, Linggang. “Effects of Er on the microstructure and properties of AZ31 magnesium alloy prepared via the EMS process,” Rare Metals. 339, 29.(2010). [CrossRef] [Google Scholar]
  5. Z. M. Sheggaf, R. Ahmad, M.B.A. Asmael, and A.M.M. Elaswad, and 1). “Solidification, microstructure, and mechanical properties of the as-cast ZRE1 magnesium alloy with different praseodymium contents,” International Journal of Minerals, Metallurgy, and Materials 24.(2017). [CrossRef] [Google Scholar]
  6. Rosalbino, F., Angelini, E., De Negri, S., Saccone, A., and Delfino, S. “Effect of Erbium addition on the corrosion behaviour of Mg–Al alloys,” Intermetallics. 55, 13.(2005). [CrossRef] [Google Scholar]
  7. Zhang, Jing, Zhang, Xu Feng, Pan, Fu Sheng, Liu, Chuan Pu, and He, Qu Bo. “Microstructure and Mechanical Properties of an Mg-Zn-Zr Alloy Modified by Rare Earth of Erbium,” Materials Science Forum. 810, 610–613.(2009). [CrossRef] [Google Scholar]
  8. Li, Han, Du, Wenbo, Li, Shubo, and Wang, Zhaohui. “Effect of Zn/Er weight ratio on phase formation and mechanical properties of as-cast Mg–Zn–Er alloys,” Materials & Design. 259, 35.(2012). [CrossRef] [Google Scholar]
  9. Ahmad, R, Sheggaf, ZM, and Asmael, MBA. “Effect of praseodymium and erbium additions on solidification characteristics, microstructure and mechanical properties of as–cast ZRE1 magnesium alloy,” Materialwissenschaft und Werkstofftechnik. 218, 48.(2017). [CrossRef] [Google Scholar]
  10. Zhang, Jing, Ma, Qi, and Pan, Fusheng. “Effects of trace Er addition on the microstructure and mechanical properties of Mg–Zn–Zr alloy,” Materials & Design. 4043, 31.(2010). [CrossRef] [Google Scholar]
  11. Pekguleryuz, Mihriban O, Kainer, Karl, and Kaya, A Arslan, 2013, Fundamentals of magnesium alloy metallurgy, Elsevier. [CrossRef] [Google Scholar]
  12. Katsarou, Lydia, Mounib, Maher, Lefebvre, Williams, Vorozhtsov, Sergey, Pavese, Matteo, Badini, Claudio, Molina-Aldareguia, Jon Mikel, Jimenez, Carmen Cepeda, Pérez Prado, Maria Teresa, and Dieringa, Hajo. “Microstructure, mechanical properties and creep of magnesium alloy Elektron21 reinforced with AlN nanoparticles by ultrasound-assisted stirring,” Materials Science and Engineering: A. 84, 659.(2016). [CrossRef] [Google Scholar]
  13. Sun, Ming, Hu, Xiaoyu, Peng, Liming, Fu, Penghuai, and Peng, Yinghong. “Effects of Sm on the grain refinement, microstructures and mechanical properties of AZ31 magnesium alloy,” Materials Science and Engineering: A. 89, 620.(2015). [CrossRef] [Google Scholar]
  14. Zhang, Jing, Li, Weiguo, Zhang, Baoxiang, and Dou, Yuchen. “Influence of Er addition and extrusion temperature on the microstructure and mechanical properties of a Mg–Zn–Zr magnesium alloy,” Materials Science and Engineering: A. 4740, 528.(2011). [CrossRef] [Google Scholar]
  15. Suzuki, A., Saddock, N. D., Jones, J. W., and Pollock, T. M. “Solidification paths and eutectic intermetallic phases in Mg–Al–Ca ternary alloys,” Acta Materialia. 2823, 53.(2005). [CrossRef] [Google Scholar]
  16. Fletcher, M, Bichlerl, L, Sediako, D, and Klassen, R, 2011, Compressive Creep Behaviour of Extruded Mg Alloys at 150° C. [Google Scholar]
  17. Sheggaf, ZM, Ahmad, R, Asmael, MBA, and Elaswad, AMM. “Solidification, microstructure, and mechanical properties of the as-cast ZRE1 magnesium alloy with different praseodymium contents,” International Journal of Minerals, Metallurgy, and Materials. 1306, 24.(2017). [CrossRef] [Google Scholar]
  18. Seetharaman, Sankaranarayanan, Blawert, Carsten, Ng, Baoshu Milton, Wong, Wai Leong Eugene, Goh, Chwee Sim, Hort, Norbert, and Gupta, Manoj. “Effect of erbium modification on the microstructure, mechanical and corrosion characteristics of binary Mg–Al alloys,” Journal of Alloys and Compounds. 759, 648.(2015). [CrossRef] [Google Scholar]
  19. Zhang, Jing, He, Qu-bo, Pan, Fu-sheng, Zhang, Xu-feng, and Liu, Chuan-pu. “Effects of erbium on microstructure and mechanical properties of as-cast Mg-7Zn-3Al alloy,” Transactions of Nonferrous Metals Society of China. s22, 18.(2008). [CrossRef] [Google Scholar]
  20. Rzychoń, Tomasz, Szala, Janusz, and Kielbus, Andrzej. “Microstructure, castability, microstructural stability and mechanical properties of ZRE1 magnesium alloy,” Archives of Metallurgy and Materials. 245, 57.(2012). [Google Scholar]
  21. Rzychoń, T. Kielbus, A, and Szala, J. “Microstructure and fluidity of sand cast ZRE1 alloy,” Journal of Achievements in Materials and Manufacturing Engineering. 135, 26.(2008). [Google Scholar]
  22. Pekguleryuz, Mihriban O, Kainer, Karl, and Kaya, Aslan, 2013, Fundamentals of magnesium alloy metallurgy, Elsevier. [CrossRef] [Google Scholar]
  23. Friedrich, Horst E, and Mordike, Barry L, 2006, Magnesium technology, Springer. [Google Scholar]
  24. Yang, Zhong, Li, JP, Zhang, JX, Lorimer, GW, and Robson, Jamsel. “Review on research and development of magnesium alloys,” Acta Metallurgica Sinica (English Letters). 313, 21.(2008). [CrossRef] [Google Scholar]
  25. Muraliraja, R, Vettrivel, H, and Elansezhian, R. “Synthesis and Characterization of Magnesium Alloy added with Yttrium and To Study the Microstructure and Mechanical Properties,” International Journal of Engineering and Innovative Technology. 338, 2.(2013). [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.