Open Access
MATEC Web Conf.
Volume 199, 2018
International Conference on Concrete Repair, Rehabilitation and Retrofitting (ICCRRR 2018)
Article Number 06006
Number of page(s) 9
Section Condition Assessment and NDT
Published online 31 October 2018
  1. Forde, M.C.: Report on nondestructive test methods for evaluation of concrete in structures: Reported by ACI Committee 228. ACI 228.2R-13. American Concrete Institute, Farmington Hills, Mich., (2013). [Google Scholar]
  2. Rupnow, T.D.; Icenogle, P.: Evaluation of Surface Resistivity Measurements as an Alternative to the Rapid Chloride Permeability Test for Quality Assurance and Acceptance: Technical Report. FHWA/LA.11/479, Baton Rouge, (2011). [Google Scholar]
  3. Deutsches Institut für Normung e.V.: Testing concrete in structures Part 2: Non-destructive testing Determination of rebound number; English version EN 12504-2:2012, ICS 91.100.30. Beuth Verlag, Berlin, (2012). [Google Scholar]
  4. Feistkorn, S.: Rebar detection — POD approach to determine the reliability of GPR systems and to quantify the influence of different material parameters. The proceedings of 2016 16th International Conference on Ground Penetrating Radar (GPR): 13-16 June 2016, The Hong Kong Polytechnic University, Department of Land Surveying and Geo-Informatics. IEEE, Piscataway, NJ, 2016, S. 1–6 (2016). [Google Scholar]
  5. Feistkorn, S.; Taffe, A.: Methods to Assess the Quality of Non-Destructive Testing in Civil Engineering Using POD and GUM for Static Calculations of Existing Structures*. Materials Testing 56, 7-8, S. 611–616 (2014). [CrossRef] [Google Scholar]
  6. Annis, C.: Nondestructive Evaluation System Reliability Assessment: Department of Defense Handbook. MIL-HDBK-1823-2, (2004). [Google Scholar]
  7. Berens, A.P.: NDE Reliability Data Analysis. In: Davis, J. (Hrsg.): Asm Metals Handbook: Nondestructive Evaluation and Quality Control. Volume 17. ASM International, 1437–1470 (1989). [Google Scholar]
  8. JCGM: Evaluation of measurement data — Guide to the expression of uncertainty in measurement 17.020. Joint Committee for Guides in Metrology (2008). [Google Scholar]
  9. Wiggenhauser, H.; Azari, H.: Classification of Nondestructive Evaluation Tasks for Reinforced Concrete Structures. Journal of Infrastructure Systems 23, 4, S. 4017021 (2017). [Google Scholar]
  10. Taffe, A.; Gehlen, C.: Methodology for the validation of NDT-CE methods using transit time measurement. In: (Hrsg.). 7th International Symposium on Nondestructive Testing in Civil Engineering (2009). [Google Scholar]
  11. Hola, J.; Bień, J.; Sadowski, Ł.; Schabowicz, K.: Non-destructive and semi-destructive diagnostics of concrete structures in assessment of their durability. Bulletin of the Polish Academy of Sciences Technical Sciences Vol. 63, No. 1, 87–96 (2015). [CrossRef] [Google Scholar]
  12. Gandossi, L.; Atkinson, I.; Booler, R.; Bouvret, Y.; Chapman, R.; Daniels, W.; Dawood, T.; Horacek, L.; Horvath, M.; Jardet, P.; Jonsson, A.; Kelsey, P.; Kuusinen, P.; Martin, E.; Martinsen, H.; Moussebois, D.; Neundorf, B.; Schwammberger, R.; Martin, O.; Söderstrand, H.; Pitkänen, J.: ENIQ recommended practice 5: Guidelines for the design of test pieces and conduct of test piece trials. ENIQ report No 42. Publications Office, Luxembourg, (2011). [Google Scholar]
  13. Seydel, J.: Ultrasonic synthetic-aperture focusing techniques in NDT. In: ed. By R.S. Sharpe (Hrsg.): Research Techniques in Nondestructive Testing. Academic Press, London, S. pp. 1–47 (1982). [Google Scholar]
  14. Schickert, M.; Krause, M.; Müller, W.: Ultrasonic Imaging of Concrete Elements Using Reconstruction by Synthetic Aperture Focusing Technique. Journal of Materials in Civil Engineering 15, 3, S. 235 (2003). [Google Scholar]
  15. Langenberg, K.; Fellinger, P.; Marklein, R.; Zanger, P.; Mayer, K.; Kreutter, T.: Inverse Methods and Imaging. In: Achenbach, J.D. (Hrsg.): The Evaluation of materials and structures by quantitative ultrasonics. Springer Verlag, Wien New York, S. 318–398 (1993). [Google Scholar]
  16. Langenberg, K.-J.; Marklein, R.; Mayer, K.: Ultrasonic nondestructive testing of materials: Theoretical foundations. CRC Press, Boca Raton, FL (2012) [CrossRef] [Google Scholar]
  17. Wiggenhauser, H.: Automated NDE of structures with combined methods. Nondestructive testing of materials and structures, Springer, Netherlands, 753–760 (2013). [CrossRef] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.