Open Access
| Issue |
MATEC Web Conf.
Volume 197, 2018
The 3rd Annual Applied Science and Engineering Conference (AASEC 2018)
|
|
|---|---|---|
| Article Number | 12003 | |
| Number of page(s) | 4 | |
| Section | Material Engineering | |
| DOI | https://doi.org/10.1051/matecconf/201819712003 | |
| Published online | 12 September 2018 | |
- M. E. Mpe, Optimization Of Process Parameter In Hardfacing By Shield Metal Arc Welding (SMAW), pp. 232-236, (2018) [Google Scholar]
- E. S. Surian, R. R. De, H. G. Svoboda, R. Rep, and L. A. De Vedia, SMAW, FCAW, and SAW high-strength ferritic deposits: The challenge is tensile properties Weld. J. (Miami, Fla), vol. 89, no. 3, p. 54s-64s, (2010) [Google Scholar]
- J. W. Sowards, A. J. Ramirez, D. W. Dickinson, and J. C. Lippold, Characterization of welding fume from SMAW electrodes-part I, Weld. J. (Miami, Fla), vol. 87, no. 4, pp. 106-112, (2008) [Google Scholar]
- K. Y. Benyounis, A. G. Olabi, and M. S. J. Hashmi, Effect of laser welding parameters on the heat input and weld-bead profile, J. Mater. Process. Technol., vol. 164-165, pp. 978-985, (2005) [CrossRef] [Google Scholar]
- H. Wibowo, M. N. Ilman, P. Iswanto, and U. G. Mada, Analisa Heat Input Pengelasan terhadap Distorsi Struktur Mikro dan Kekuatan Mekanis Baja A36, vol. 7, no. 1, pp. 3-8, (2016) [Google Scholar]
- E. Surian, M. Ramini de Rissone, and L. De Vedia, Influence of Molybdenum on Ferritic High-Strength SMAW All-Weld-Metal Properties, Weld. J., vol. 84, no. 4, pp. 53-62, (2005) [Google Scholar]
- P. K. A. V. A. G. Karthik, Comparative Evaluation of Mechanical Properties and Micro Structural Characteristics of 304 Stainless Steel Weldments in TIG and SMAW Welding Processes, Int. J. Curr. Eng. Technol., no. special issue-2, pp. 200-206, (2014) [Google Scholar]
- P. S. Gowthaman, P. Muthukumaran, J. Gowthaman, and C. Arun, Review on Mechanical Characteristics of 304 Stainless Steel using SMAW Welding, MASK Int. J. Sci. Technol., vol. 2, no. 2, pp. 33-37, (2017) [Google Scholar]
- J. A. Francis, G. M. D. Cantin, W. Mazur, and H. K. D. H. Bhadeshia, Effects of weld preheat temperature and heat input on type IV failure, Sci. Technol. Weld. Join., vol. 14, no. 5, pp. 436-442, (2009) [CrossRef] [Google Scholar]
- G. Atkins, D. Thiessen, N. Nissley, and Y. Adonyi, Welding process effects in weldability testing of steels, Weld. J., p. 61-68s, (2002) [Google Scholar]
- C. M. Shivakumara, P. B. R. N. Babu, and B. S. Praveen, Optimization Of Shielded Metal Arc Welding Parameters For Welding Of Pipes By Using Taguchi Approach, vol. 4, no. 5, pp. 1460-1465, (2013) [Google Scholar]
- E. Widodo and S. R. Yulianto, Optimization of Temperature Nickel Chrome Coating to Get Best Quality of Hardness and Thickness of Steel ST 40, in Proceeding of International Conference on Green Technology, pp. 88-90 (2014) [Google Scholar]
- G. R. Kumar, G. D. J. Ram, and S. R. K. Rao, Microstructure and mechanical properties of borated stainless steel (304B) GTA and SMA welds, Metall. Ital., vol. 107, no. 5, pp. 47-52, (2015) [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.