EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 197 (2018) MATEC Web Conf., 197 (2018) 03017 References
Open Access
Issue
MATEC Web Conf.
Volume 197, 2018
The 3rd Annual Applied Science and Engineering Conference (AASEC 2018)
Article Number 03017
Number of page(s) 4
Section Computer Science
DOI https://doi.org/10.1051/matecconf/201819703017
Published online 12 September 2018
  1. C. Slamet, A. Rahman, A. Sutedi, W. Darmalaksana, M. A. Ramdhani and D. S. Maylawati, “Social Media-Based Identifier for Natural Disaster,” IOP Conference Series: Materials Science and Engineering, vol. 288, no. 1, p. 012039, (2018) [Google Scholar]
  2. I. McCallum and et al, “echnologies to support community flood disaster risk reduction,” International Journal of Disaster Risk Science, vol. 7, no. 2, pp. 198-204, (2016) [CrossRef] [Google Scholar]
  3. M. A. Ramdhani, H. Aulawi, A. Ikhwana and Y. Mauluddin, “Model of Green Technology Adaptation in Small and Medium-Sized Tannery Industry,” Journal of Engineering and Applied Sciences, vol. 12, no. 4, pp. 954-962, (2017) [Google Scholar]
  4. A. Pamoragung, K. Suryadi and M. A. Ramdhani, “Enhancing the Implementation of e-Government in Indonesia Through the High-Quality of Virtual Community and Knowledge Portal,” in 6th European Conference on e-Government, Marburg, (2006) [Google Scholar]
  5. E. Sofiah and Y. Septiana, “Sistem Pendukung Keputusan Feasibility Study untuk Menilai Kelayakan Sebuah Bisnis,” Jurnal Wawasan Ilmiah, vol. 8, no. 1, pp. 1-7, (2017) [Google Scholar]
  6. M. Siegrist and H. Gutscher, “Natural hazards and motivation for mitigation behavior: People cannot predict the affect evoked by a severe flood,” Risk Analysis, vol. 28, no. 3, pp. 771-778, (2008) [CrossRef] [Google Scholar]
  7. Z. Zhou, S. Liu, G. Zhong and Y. Cai, “Flood disaster and flood control measurements in Shanghai,” Natural Hazards Review, vol. 18, no. 1, p. B5016001, (2016) [CrossRef] [Google Scholar]
  8. P. Bubeck, W. J. Botzen and J. C. Aerts, “A review of risk perceptions and other factors that influence flood mitigation behavior,” Risk analysis, vol. 32, no. 9, pp. 1481-1495, (2012) [CrossRef] [Google Scholar]
  9. Y. Septiana, D. Kurniadi and A. Mulyani, “Perancangan Program Aplikasi Faraidh sebagai Sistem Pendukung Keputusan Pembagian Harta Waris Berorientasi Solver,” Jurnal Algoritma, vol. 14, no. 2, pp. 474-480, (2017) [Google Scholar]
  10. C. Slamet, A. Rahman, A. Sutedi, W. Darmalaksana, M. A. Ramdhani and D. S. Maylawati, “Social Media-Based Identifier for Natural Disaster,” IOP Conference Series: Materials Science and Engineering, vol. 288, no. 2017, p. 012039, (2018) [Google Scholar]
  11. C. Slamet, R. Andrian, D. S. Maylawati, Suhendar, W. Darmalaksana and M. A. Ramdhani, “Web Scraping and Naïve Bayes Classification for Job Search Engine,” IOP Conference Series: Materials Science and Engineering, vol. 288, no. 2017, p. 012038, (2018) [CrossRef] [Google Scholar]
  12. Y. A. Gerhana, W. B. Zulfikar, A. H. Ramdani and M. A. Ramdhani, “Implementation of Nearest Neighbor using HSV to Identify Skin Disease,” IOP Conference Series: Materials Science and Engineering, vol. 288, no. 2017, p. 012153, (2018) [Google Scholar]
  13. A. Rahman, C. Slamet, W. Darmalaksana, Y. A. Gerhana and M. A. Ramdhani, “Expert System for Deciding a Solution of Mechanical Failure in a Car using Case-based Reasoning,” IOP Conference Series: Materials Science and Engineering, vol. 288, no. 2017, p. 012011, (2018) [Google Scholar]
  14. C. Slamet, A. Rahman, M. A. Ramdhani and W. Darmalaksana, “Clustering the Verses of the Holy Qur’an using K-Means Algorithm,” Asian Journal of Information Technology, vol. 15, no. 24, pp. 5159-5162, (2016) [Google Scholar]
  15. W. B. Zulfikar, Jumadi, P. K. Prasetyo and M. A. Ramdhani, “Implementation of Mamdani Fuzzy Method in Employee Promotion System,” IOP Conference Series: Materials Science and Engineering, vol. 288, no. 2017, p. 012147, (2018) [Google Scholar]
  16. D. S. Maylawati, M. A. Ramdhani, A. Rahman and W. Darmalaksana, “Incremental technique with set of frequent word item sets for mining large Indonesian text data,” in International Conference on Cyber and IT Service Management, Denpasar, (2017) [Google Scholar]
  17. A. Taofik, N. Ismail, Y. A. Gerhana, K. Komarujaman and M. A. Ramdhani, “Design of Smart System to Detect Ripeness of Tomato and Chili with New Approach in Data Acquisition,” IOP Conference Series: Materials Science and Engineering, vol. 288, no. 2017, p. 012018, (2018) [CrossRef] [Google Scholar]
  18. C. Giardino, N. Paternoster, M. Unterkalmsteiner, T. Gorschek and P. Abrahamsson, “Software development in startup companies: the greenfield startup model,” IEEE Transactions on Software Engineering, vol. 42, no. 6, pp. 585-604, (2016) [CrossRef] [Google Scholar]
  19. N. M. A. Munassar and A. Govardhan, “A comparison between five models of software engineering,” IJCSI, vol. 5, pp. 95-101, (2010) [Google Scholar]
  20. D. Kurniadi, S. Sasmoko, H. L. H. S. Warnars and F. L. Gaol, “Software size measurement of student information terminal with use case point,” in 2017 IEEE International Conference on Cybernetics and Computational Intelligence (CyberneticsCom), (2017) [Google Scholar]
  21. R. G. Sabale and A. R. Dani, “Comparative study of prototype model for software engineering with system development Life Cycle,” IOSR Journal of Engineering, vol. 2, no. 7, pp. 21-24, (2012) [CrossRef] [Google Scholar]
  22. D. M. Buede and M. W. D, The engineering design of systems: models and methods, John Wiley & Sons, (2016) [Google Scholar]
  23. H. M. Chen, R. Kazman and S. Haziyev, “Strategic prototyping for developing big data systems,” IEEE Software, vol. 33, no. 2, pp. 36-43, (2016) [CrossRef] [Google Scholar]
  24. A. Saxena and P. Upadhyay, “Waterfall vs. prototype: Comparative study of sdlc,” Imperial Journal of Interdisciplinary Research, vol. 2, no. 6, (2016) [Google Scholar]
  25. M. Kaur and J. Pal, “Distance Measurement of Object by Ultrasonic Sensor HC-SR04,” Int’l Journal for Scientific Research & Development, vol. 3, no. 05, (2015) [Google Scholar]
  26. Y. A. Tuwaidan, V. C. Poekoel and D. J. Mamahit, “Rancang Bangun Alat Ukur Desibel (dB) Meter Berbasis Mikrokontroler Arduino Uno R3,” E-journal Teknik Elektro dan Komputer, vol. 4, no. 1, pp. 37-43, (2015) [Google Scholar]
  27. J. M. Alonso, A. J. Calleja, D. Gacio, J. Cardesín and E. López, “A long-life high-power-factor HPS-lamp LED retrofit converter based on the integrated buck-boost buck topology,” In IECon 2011-37th Annual, pp. 2860-2865, (2011) [CrossRef] [Google Scholar]
  28. W. C. Cheng, Y. Hou and M. Pedram, “Power minimization in a backlit TFT-LCD display by concurrent brightness and contrast scaling,” In Proceedings of the conference on Design, automation and test in Europe, vol. 1, p. 10252, (2004) [Google Scholar]
  29. M. A. Desima, P. Ramli, D. F. Ramdani and S. Rahman, “Alarm system to detect the location of IOT-based public vehicle accidents,” In Computing, Engineering, and Design 2017 International Conference on. IEEE, pp. 1-5, (2017) [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.