EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 195 (2018) MATEC Web Conf., 195 (2018) 01021 References
Open Access
Issue
MATEC Web Conf.
Volume 195, 2018
The 4th International Conference on Rehabilitation and Maintenance in Civil Engineering (ICRMCE 2018)
Article Number 01021
Number of page(s) 10
Section Construction Materials
DOI https://doi.org/10.1051/matecconf/201819501021
Published online 22 August 2018
  1. H. H. Ahmad, Tavio, Experimental Study of Cold-Bonded Artificial Lightweight Aggregate Concrete, AIP Conference Proceedings, American Institute of Physics, 1977, 030011-1-030011-8 (2018). [Google Scholar]
  2. D. Raharjo, A. Subakti, Tavio, Mixed Concrete Optimization using Fly Ash, Silica Fume and Iron Slag on the SCC’s Compressive Strength, Procedia Engineering, Elsevier, 54, 827-839 (2013). [CrossRef] [Google Scholar]
  3. D. T. A. Bramantio, I G. P. Raka, Tavio, Lightweight Aggregate Concrete using Pumice as Coarse Aggregate Partial Substitution, The 4th National Conference of Civil Engineering (KoNTekS-4), Bali, Indonesia, S-173-S-180 (2010). [Google Scholar]
  4. Tavio, B. Kusuma, P. Suprobo, Experimental Behavior of Concrete Columns Confined by Welded Wire Fabric as Transverse Reinforcement under Axial Compression, ACI Structural Journal, American Concrete Institute, 109 (3), 339-348 (2012). [Google Scholar]
  5. P. Pudjisuryadi, Tavio, P. Suprobo, Performance of Square Reinforced Concrete Columns Externally Confined by Steel Angle Collars under Combined Axial and Lateral Load, Procedia Engineering, Elsevier, 125, 1043-1049 (2015). [CrossRef] [Google Scholar]
  6. Tavio, P. Suprobo, B. Kusuma, Ductility of Confined Reinforced Concrete Columns with Welded Reinforcement Grids, Excellence in Concrete Construction through Innovation-Proceedings of the International Conference on Concrete Construction, CRC Press, Taylor and Francis Group, London, UK, 339-344 (2009). [Google Scholar]
  7. B. Kusuma, Tavio, P. Suprobo, Axial Load Behavior of Concrete Columns with Welded Wire Fabric as Transverse Reinforcement, Procedia Engineering, Elsevier, 14, 2039-2047 (2011). [CrossRef] [Google Scholar]
  8. Tavio, B. Kusuma, P. Suprobo., Investigation of Stress-Strain Models for Confinement of Concrete by Welded Wire Fabric, Procedia Engineering, Elsevier, 14, 2031-2038 (2011). [Google Scholar]
  9. Tavio, B. Kusuma, Stress-Strain Model for High-Strength Concrete Confined by Welded Wire Fabric, Journal of Materials in Civil Engineering, American Society of Civil Engineers, 21 (1), 40-45 (2009). [CrossRef] [Google Scholar]
  10. Tavio, R. Anggraini, I G. P. Raka, Agustiar, Tensile Strength/Yield Strength (TS/YS) Ratios of High-Strength Steel (HSS) Reinforcing Bars, AIP Conference Proceedings, American Institute of Physics, 1964, 020036-1-020036-8 (2018). [Google Scholar]
  11. Tavio, P. Suprobo, B. Kusuma, Strength and Ductility Enhancement of Reinforced HSC Columns Confined with High-Strength Transverse Steel, Proceedings of the Eleventh East Asia-Pacific Conference on Structural Engineering and Construction (EASEC-11), Taipei, Taiwan, 350-351 (2008). [Google Scholar]
  12. R. Anggraini, Tavio, I G. P. Raka, Agustiar, Stress-Strain Relationship of High-Strength Steel (HSS) Reinforcing Bars, AIP Conference Proceedings, American Institute of Physics, 1964, 020025-1-020025-8 (2018). [Google Scholar]
  13. P. Pudjisuryadi, Tavio, P. Suprobo, Axial Compressive Behavior of Square Concrete Columns Externally Collared by Light Structural Steel Angle Sections, International Journal of Applied Engineering Research, Research India Publications, 11 (7), 4655-4666 (2016). [Google Scholar]
  14. B. Sabariman, A. Soehardjono, Wisnumurti, A. Wibowo, Tavio, Stress-Strain Behavior of Steel Fiber-Reinforced Concrete Cylinders Spirally Confined with Steel Bars, Advances in Civil Engineering, Hindawi, 2018, 1-8 (2018). [CrossRef] [Google Scholar]
  15. M. D. Astawa, I G. P. Raka, Tavio, Moment Contribution Capacity of Tendon Prestressed Partial on Concrete Beam-Column Joint Interior According to Provisions ACI 318-2008 Chapter 21.5.2.5(c) Due to Cyclic Lateral Loads, MATEC Web of Conferences, EDP Sciences, 58 (04005), 1-8 (2016). [CrossRef] [EDP Sciences] [Google Scholar]
  16. Tavio, Parmo, A Proposed Clamp System for Mechanical Connection of Reinforcing Steel Bars, International Journal of Applied Engineering Research, Research India Publications, 11 (11), 7355-7361 (2016). [Google Scholar]
  17. I G. P. Raka, Tavio, M. D. Astawa, State-of-the-Art Report on Partially-Prestressed Concrete Earthquake-Resistant Building Structures for Highly-Seismic Region, Procedia Engineering, Elsevier, 95, 43-53 (2014). [CrossRef] [Google Scholar]
  18. Tavio, S. Teng, Effective Torsional Rigidity of Reinforced Concrete Members, ACI Structural Journal, American Concrete Institute, 101 (2), 252-260 (2004). [Google Scholar]
  19. Tavio, Interactive Mechanical Model for Shear Strength of Deep Beams, Journal of Structural Engineering, American Society of Structural Engineers, 132 (5), 826-827 (2006). [Google Scholar]
  20. M. D. Astawa, Tavio, I G. P. Raka, Ductile Structure Framework of Earthquake Resistant of High-Rise Building on Exterior Beam-Column Joint with the Partial Prestressed Concrete Beam-Column Reinforced Concrete, Procedia Engineering, Elsevier, 54, 413-427 (2013). [CrossRef] [Google Scholar]
  21. C. A. Cadere, M. Barbuta, B. Rosca, A. A. Serbanoiu, A. Burlacu, I. Oancea, Engineering Properties of Concrete with Polystyrene Granules, Procedia Manufacturing, Elsevier, 22, 288-293 (2018). [Google Scholar]
  22. B. Chen, J. Liu, Properties of Lightweight Expanded Polystyrene Concrete Reinforced with Fiber, Cement and Concrete Research, 34, 1259-1263 (2004). [CrossRef] [Google Scholar]
  23. A. Paranje, P. Kulkarni, Experimental Investigation on Styrofoam Based Concrete, International Journal of Mechanical and Production Engineering, 5 (12), 56-61 (2017). [Google Scholar]
  24. M. Kamran, M. Mishra, Behavior of Self-Compacting Concrete using PPC and OPC with Different Proportions of Fly Ash, International Journal of Research in Engineering and Technology, 3 (9), 342-345 (2014). [Google Scholar]
  25. ASTM Subcommittee C09.61, Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens (ASTM C39/C39M-18), ASTM International (2018). [Google Scholar]
  26. ACI Committee 318, Building Code Requirements for Structural Concrete (ACI 318M-14) and Commentary (ACI 318RM-14), American Concrete Institute, 519 (2014). [Google Scholar]
  27. Y. Xu, L. Jiang, J. Xu, Y. Li, Mechanical Properties of Expanded Polystyrene Lightweight Aggregate Concrete and Brick, Construction and Building Materials, 27, 32-38 (2012). [Google Scholar]
  28. A. Sadrmomtazi, M. A. M. Langeroudi, A. Fasihi, A. K. Haghi, An Investigation on Effect of using PP Fibers and Different Cementitious Materials on Mechanical Properties of EPS Concrete, International Council for Research and Innovation in Building and Construction, CD08-005, 1035-1044 (2009). [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.