EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 188 (2018) MATEC Web Conf., 188 (2018) 03013 References
Open Access
Issue
MATEC Web Conf.
Volume 188, 2018
5th International Conference of Engineering Against Failure (ICEAF-V 2018)
Article Number 03013
Number of page(s) 10
Section Metallic Materials II: Damage Accumulation, Structural Integrity, Advanced Manufacturing Techniques
DOI https://doi.org/10.1051/matecconf/201818803013
Published online 07 August 2018
  1. T. Wohlers [Ed.]. Wohlers Report 2018. Fort Collins: Wohlers Associates; 2018. [Google Scholar]
  2. B. P. Conner, G. P. Manogharan, A. N. Martof, L. M. Rodomsky, C. M. Rodomsky, D. C. Jordan, J. W. Limperos, Additive Manufacturing 1-4, 64 (2014) [CrossRef] [Google Scholar]
  3. D. Wu, D. W. Rosen, L. Wang, D. Schaefer, Computer-Aided Design 59, 1 (2015) [CrossRef] [Google Scholar]
  4. D. Lehmhus, A. von Hehl, K. Kayvantash, R. Gradinger, T. Becker, K. Schimanski, M. Avalle, Materials & Design 66, 385 (2015) [CrossRef] [Google Scholar]
  5. A. Uriondo, M. Esperon-Miguez, S. Perinpanayagam, Journal of Aerospace Engineering 229, 2132 (2015) [Google Scholar]
  6. M. Cronskär, M. Bäckström, L.-E. Rännar, Rapid Prototyping Journal 19, 365 (2013) [CrossRef] [Google Scholar]
  7. C.-Y. Liaw, M. Guvendiren, Biofabrication 9, 024102 (2017) [CrossRef] [Google Scholar]
  8. A. Youssef, S. J. Hollister, P. D. Dalton, Biofabrication 9, 012002 (2017) [CrossRef] [Google Scholar]
  9. F. Trevisan, F. Calignano, A. Aversa, G. Marchese, M. Lombardi, S. Biamino, D. Ugues, D. Manfredi, J. of Appl. Biomaterials & Functional Materials 16, 57 (2018) [CrossRef] [Google Scholar]
  10. Active Standard ASTM F2792 Standard Terminology for Additive Manufacturing Technologies. West Conshohocken: ASTM Int.; 2012. [Google Scholar]
  11. D. Ding, Z. Pan, D. Cuiuri, H. Li, Int. J. of Manufact. Techn. 81, 465 (2015) [Google Scholar]
  12. F. Petzoldt, C. Aumund-Kopp, Standards for metal Additive Manufacturing: A global perspective, Metal Additive Manufacturing, Inovar Com. Ltd., Shrewsbury, UK, 2016, p. 45. [Google Scholar]
  13. D. Lehmhus, C. Aumund-Kopp, M. Uhlirsch, L. Sentker, T. Haupt, A. Ditsche, D. Zibelius, F. Petzoldt, M. Busse, Powder Metallurgy 61, invited for submission (2018) [Google Scholar]
  14. D. Lehmhus, M. Busse, In: S. Bosse, D. Lehmhus, W. Lang, M. Busse, Materialintegrated Intelligent Systems, Wiley-VCH Verlag, Weinheim 2018, p. 217 [Google Scholar]
  15. L. Hitzler, M. Merkel, W. Hall, A. Öchsner, Adv. Eng. Mat. 20, 1700658 (2018) [CrossRef] [Google Scholar]
  16. A. K. Singh, B. Patil, N. Hoffmann et al., JOM 70, 303 (2018) [CrossRef] [Google Scholar]
  17. A. K. Singh, B. Patil, N. Hoffmann et al., JOM 70, 310 (2018) [CrossRef] [Google Scholar]
  18. M. Yakout, M. A. Elbestawi, Proceedings of the 6th International Conference on Virtual Machining Process Technology (VMPT), Montréal, May 29th-June 2nd, 2017 [Google Scholar]
  19. K. Chang, D. Gu, Journal of Materials Research 31, 281 (2016) [CrossRef] [Google Scholar]
  20. J. Günther, F. Brenne, M. Droste, M. Wendler, O. Volkova, H. Biermann, T. Niendorf, Nature Scientific Reports 8, 1298 (2018), DOI: 10.1038/s41598-018-19376-0 [CrossRef] [Google Scholar]
  21. D. Knoop, F. Mostaghimi, A. von Hehl, S. Jäger, B. Mais, DGM Fachtagung Werkstoffe und Additive Fertigung, April 25th-26th, 2018, Potsdam, Germany. [Google Scholar]
  22. T. Laumer, M. Karg, M. Schmidt, Physics Procedia 39, 518 (2012) [CrossRef] [Google Scholar]
  23. Y. Chivel, Physics Procedia 83, 891 (2016) [CrossRef] [Google Scholar]
  24. A. G. Demir, B. Previtali, Manufacturing Letters 11, 8 (2017) [CrossRef] [Google Scholar]
  25. C. Wei, L. Li, X. Zhan, Y.-H. Chueh, CIRP Annals, in press, corrected proof, DOI: 10.1016/j.cirp.2018.04.096 (2018) [Google Scholar]
  26. S. M. Thompson, L. Bian, N. Shamsaei, A. Yadollahi, Additive Manufacturing 8, 36 (2015) [Google Scholar]
  27. B. E. Carroll, R. A. Otis, J. P. Borgoni, J.-O Suh, R. P. Dillon, A. A. Shapiro, D. C. Hofmann, Z.-K. Liu, A. M. Beese, Acta Materialia 108, 46 (2016) [CrossRef] [Google Scholar]
  28. H. Knoll, S. Ocylok, A. Weisheit, H. Springer, E. Jägle, D. Raabe, Steel Research International 87, 1 (2016) [Google Scholar]
  29. D. Godlinski, S. Morvan, Materials Science Forum 492-493, 679 (2005) [CrossRef] [Google Scholar]
  30. H. Helmer, A. Bauereiß, R. F. Singer, C. Körner,. Mat. Sci. Eng. A 668, 180 (2016) [CrossRef] [Google Scholar]
  31. N. Raghavan, R. Dehoff, S. Pannala, S. Simunovic, M. Kirka, J. Turner, N. Carlson,. S. S. Babu, Acta Materialia 112, 303 (2016) [CrossRef] [Google Scholar]
  32. M. M. Kirka, P. Nandwana, Y. Lee, R. R. Dehoff, Scripta Materialia, 135, 130 (2017) [CrossRef] [Google Scholar]
  33. W. Xu, E. W. Lui, A. Pateras, M. Qian, M. Brandt, Acta Materialia, 125, 390 (2017) [CrossRef] [Google Scholar]
  34. P. Kürnsteiner, M. B. Wilms, A. Weisheit, P. Barriobero-Vila, E. A. Jägle, D. Raabe, Acta Materialie 129, 52 (2017) [CrossRef] [Google Scholar]
  35. S. J. Wolff, S. Lin, E. J. Faierson, W. K. Liu, G. J. Wagner, J. Cao, Acta Materialia 132, 106 (2017) [CrossRef] [Google Scholar]
  36. A. Burblies, M. Busse, Computer Based Porosity Design by Multi Phase Topology Optimization. Multiscale & Functionally Graded Materials Conference (FGM2006), October 15th-18th 2006, Honolulu (Hawaii), USA [Google Scholar]
  37. D. Schittenhelm, A. Burblies, M. Busse, Forschung im Ingenieurwesen 82, 131 (2018) [CrossRef] [Google Scholar]
  38. D. Lehmhus, C. Aumund-Kopp, F. Petzoldt, D. Godlinski, A. Haberkorn, V. Zöllmer, M. Busse, Procedia Technology 26, 284 (2016) [CrossRef] [Google Scholar]
  39. D. Lehmhus, T. Wuest, S. Wellsandt, S. Bosse, T. Kaihara, K.-D. Thoben, M. Busse, Sensors 15, 32079 (2015) [CrossRef] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.