Open Access
Issue
MATEC Web Conf.
Volume 182, 2018
17th International Conference Diagnostics of Machines and Vehicles
Article Number 02025
Number of page(s) 11
Section Methodology and Vibroacoustics
DOI https://doi.org/10.1051/matecconf/201718202025
Published online 24 August 2018
  1. Błachnio J., Kułaszka A., Chalimoniuk M., Giewoñ J., Woźny P., Raport z badañ [Test report], ITWL, Warszawa (2016) [Google Scholar]
  2. Błachnio J., Kułaszka A., Chalimoniuk M., Woźny P., Egzemplifikacja metody tomografii komputerowej do oceny jakości połączeñ spawanych ze stopu EN 5754 H22 [Exemplification of a computed tomography method for the evaluation of EN 5754 H22 alloy welded joint quality]. Research Works of Air Force Institute of Technology, No. 39 (2016) [Google Scholar]
  3. Cichosz E., Obciążenia zewnętrzne samolotu [Aircraft internal loads]. WAT (1968) [Google Scholar]
  4. Cichosz E., Konstrukcja i praca płatowca [Airframe structure and operation]. WAT (1968) [Google Scholar]
  5. Ciszewski A., Radomski T., Szummer S., Materiałoznawstwo [Materials science], OWPW, Warszawa, (2003) [Google Scholar]
  6. Czuchryj J., B. Kupisz B., Badania złącz spawanych [Weld joint tests]. Przegląd metod, KaBe, Krosno (2009) [Google Scholar]
  7. Dobrzañski L.A., Podstawy nauki o materiałach [Basic materials science], WNT, Warszawa (2003) [Google Scholar]
  8. Dragan. K., Leski A., Konstrukcje kompozytowe - problematyka wytwarzania i metody diagnozowania, XXII Seminarium Nieniszczące Badania Materiałów [Composite structures - manufacturing issues and diagnosing methods, XXII Seminar on Material NDTs], Zakopane (2016) [Google Scholar]
  9. Ferenc K., Ferenc J.: Konstrukcje spawane, Projektowanie. [Welded structures. Designing] WNT, Warsaw (2000) [Google Scholar]
  10. Ferenc K.: Spawalnictwo. WNT, Warsaw (2007) [Google Scholar]
  11. Goraj Z., Dynamika i aerodynamika samolotów manewrowych z elementami obliczeñ [Dynamics and aerodynamics of manoeuvring aircraft with computation elements], Biblioteka Naukowa Instytutu Lotnictwa, Warszawa (2011) [Google Scholar]
  12. McPherson JW. Reliability physics and engineering. New York: Springer (2010) [CrossRef] [Google Scholar]
  13. Mizerski J., Spawanie w osłonie gazów metodą TIG [Gas shielded TIG welding], REA, Warszawa (2008) [Google Scholar]
  14. Mizerski J., Spawanie, wiadomości podstawowe [Welding. Basic information], REA, Warszawa (2008) [Google Scholar]
  15. Pilarczyk J., Poradnik inżyniera [Engineer's guidebook]. Spawalnictwo, WNT, Warsaw (2003) [Google Scholar]
  16. Rasuo B., Duknic G. Optimization of the aircraft general overhaul process. Aircraft engineering and aerospace technology 85-5 (2013) [Google Scholar]
  17. Schellhase M., Der Schweisslichtbogen – ein technologisches Werkzeug, Verlag Technik. Berlin (1985) [Google Scholar]
  18. Wang YS, Zhang CH, Zhang SF, Chen X, Tan YY. Optimal design of constant stress accelerated degradation test plan with multiple stresses and multiple degradation measures. Proceedings of the Institution of Mechanical Engineers, Part O: Journal of Risk and Reliability; 229-1 (2015) [Google Scholar]
  19. Woźny P., Błachnio J.: Analiza uszkodzeñ eksploatacyjnych wielozadaniowego statku powietrznego na przykładzie procesu obsług i napraw, Rozdział w monografii pt.: Problemy Badañ i Eksploatacji Techniki Lotniczej, T.9 [Analysis of operational damage to a multi-task aircraft based on the example of the maintenance and repair proces. Chapter in a monograph titled: Issues of Aviation Technique Tests and Operation] (2016) [Google Scholar]
  20. Woźny P., Błachnio J., Kułaszka A., Chalimoniuk M.: Ocena stanu technicznego spawów w próbkach ze stopu Al gatunku EN AN 5754 metodą tomografii komputerowej [Assessing the technical conditions of welds in EN AN 5754 grade Al alloy using computed tomography]. Aviation Advances & Maintenance vol. 40 (2017) [Google Scholar]
  21. PN-EN ISO 15614-2:2008 „Specification and qualification of welding procedures for metallic materials – Welding procedure test - Part 2: Arc welding of aluminium and its alloys. [Google Scholar]
  22. PN-EN ISO 6892-1:2010 - Metallic materials - Tensile testing - Part 1: Test method at room temperature. [Google Scholar]
  23. PN-M-69414:1975 - Fusion-welding - Fillers for welding aluminium and aluminium alloys. [Google Scholar]
  24. PN-L-01426:1995 Aviation and aeronautics - Welding aerial structures – Inspection and acceptance guidelines for steel, heat-resistant alloys, high-temp creep resistant and aluminium alloys welded joints. [Google Scholar]
  25. PN-ISO 5817:2009 Fusion welding - Fusion welded joints in steel, nickel, titanium and their alloys (beam welding excluded) - Quality levels for welding imperfections. [Google Scholar]
  26. PN-EN ISO 10042:2008 Fusion welding - Fusion welded joints in aluminium and its alloys – Quality levels for welding imperfections. [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.