Open Access
MATEC Web Conf.
Volume 175, 2018
2018 International Forum on Construction, Aviation and Environmental Engineering-Internet of Things (IFCAE-IOT 2018)
Article Number 03061
Number of page(s) 5
Section Computer Simulation and Design
Published online 02 July 2018
  1. J. Tlusty, M. Polacek, The stability of machine tools against self-excited vibrations in machining, Proc. ASME Int. Res. Prod. Eng. (1963) 465–474. [Google Scholar]
  2. Y. Altintas, E. Budak, Analytical prediction of stability lobes in milling, Ann. CIRP 44 (1995) [Google Scholar]
  3. Y. Altintas, G. Stepan, D. Merdol, Z. Dombovari, Chatter stability of milling in frequency and discrete time domain, Cirp J. Manuf. Sci. Technol., 1 (2008) [Google Scholar]
  4. O. Özşahin, E. Budak, H.N. Özgüven. In-process tool point FRF identification under operational Conditions using inverse stability solution, Int. J. Mach. Tools Manuf., 89 (2014) 64-73. [Google Scholar]
  5. X.M. Zhang, H. Ding. Note on a novel method for machining parameters optimization in a chatter-free milling process. Int. J. Mach. Tools Manuf., 72 (2013) 11-15. [CrossRef] [Google Scholar]
  6. X.M. Zhang, L. Zhu, D. Zhang, et al. Numerical robust optimization of spindle speed for milling process with uncertainties, Int. J. Mach. Tools Manuf., 61 (2012): 9-19. [CrossRef] [Google Scholar]
  7. H. Xiao, D. Ren, S. Wang. EDM machining quality control and parameters optimization. Int. J. Adv. Manuf. Technol., 89 (2017) 1307-1315. [CrossRef] [Google Scholar]
  8. Y. Li, Q. Liu. Service-oriented research on multi-pass milling parameters optimization for green and high efficiency. J. Mech. Eng.,51 (2015) 89-98 [CrossRef] [Google Scholar]
  9. H.R. Cao, X.F Chen. Z.J He. Modeling of spindle-process interaction and cutting parameters optimization in high-speed milling. J. Mech. Eng., 49 (2013) 161-166. [CrossRef] [Google Scholar]
  10. D. Fratila, C. Caizar. Application of Taguchi method to selection of optimal lubrication and cutting conditions in face milling of AlMg3. J. Clean. Prod., 19 (2011) 640-645. [Google Scholar]
  11. E. Budak, A. Tekeli, Maximizing chatter free material removal rate in milling through optimal selection of axial and radial depth of cut pairs, CIRP Annals—Manuf. Technol. 54 (2005) 353–356. [CrossRef] [Google Scholar]
  12. E. Graham, M. Mehrpouya, S.S. Park. Robust prediction of chatter stability in milling based on the analytical chatter stability. J. Manuf. Processes, 15 (2013) 508-517. [CrossRef] [Google Scholar]
  13. S.S. Park Y.M. Qin. Robust regenerative chatter stability in machine tools, Int. J. Adv. Manuf. Technol., 33 (2007) 389- 402. [CrossRef] [Google Scholar]
  14. P. Yi, K. Wei, X. Kong, et al. Cumulative PSO-Kriging model for slope reliability analysis, Probabilist Eng. Mech, 39 (2015) 39-45. [CrossRef] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.