Open Access
Issue |
MATEC Web Conf.
Volume 174, 2018
3rd Scientific Conference Environmental Challenges in Civil Engineering (ECCE 2018)
|
|
---|---|---|
Article Number | 02009 | |
Number of page(s) | 9 | |
Section | Material Engineering, Waste Management in Civil Engineering | |
DOI | https://doi.org/10.1051/matecconf/201817402009 | |
Published online | 26 June 2018 |
- J. Krassowska, A. Łapko, Przydatność stosowania nowoczesnych kompozytów fibrobetonowych w konstrukcjach budowlanych, Budownictwo i Inżynieria Środowiska 2, 1 (2011) [Google Scholar]
- M. Fejdyś, M. Łandwijt, Włókna techniczne wzmacniające materiały kompozytowe, Techniczne Wyroby Włókiennicze, 2010 [Google Scholar]
- R. Dachowski, M. Nowek, Procedia Engineering, 161 (2016) [Google Scholar]
- R. Dachowski, P. Kostrzewa Impact of polyethylene glycol on porosity and microstructure of sand-lime product, E3S Web of Conferences 10 (2016) [Google Scholar]
- A. StĘpień, P. Kostrzewa, Autoclaved Sand-Lime Products with a Polypropylene Mesh Material Science and Egineering 245 (2017) [Google Scholar]
- S. M. Dobosz, J Godziemski, M. Piasecki, Solidification of Metals and Alloys 1, 39 (1999) [Google Scholar]
- M. Kozieł, Charakterystyka krajowych bazaltów region dolnośląskiego z przeznaczeniem na włókna amorficzne, Scientific Works of Institute of Glass, Ceramics Refractory and Construction Materials, 4 (2009) [Google Scholar]
- T. Zych, Technical Transactions, 8-A (2010) [Google Scholar]
- PN-EN 772-1+A1:2015-10E Methods of test for masonry units - Part 1: Determination of compressive strength [Google Scholar]
- PN-EN 772-13:2001P Methods of masonry units - Part 13: Determination of net and gross dry density of masonry units (except for natural stone) [Google Scholar]
- PN-EN 772-21:2011E Methods of test for masonry units - Part 21: Determination of water absorption of clay and calcium silicate masonry units by cold water absorption [Google Scholar]
- G. Zapotoczna-Sytek, S. Balkovic, Autoclaved Aerated Concrete (2013) [Google Scholar]
- R. Dachowski, S. StĘpień, The Impact of Barium Aggregate on the Microstructure of Sand-Lime Products, Trans Tech Publications LTD (2011) [Google Scholar]
- D. Kubatova, M. Bohac, R. Necas, The Effect of Mechanical Activation of Lime Putty on Properties of the Autoclaved Calcium Hydrosilicate Materials, 151 (2016) [Google Scholar]
- S. Shaw, S. M. Clark, C. M. B. Henderson, Hydrothermal Formation of the Calcium Silicate Hydrates, Tobermorite (Ca5Si6O16(OH)2•4H2O) and Xonotlite (Ca6Si6O17(OH)2): an in Situ Synchrotron Study, 167 (2000) [Google Scholar]
- A. Hartmann, J. C. Buhl, K. Breugel, Structure and phase investigations on crystallization of 11 Å tobermorite in lime sand pellets, Cement Concrete Res., 37 (2017) [Google Scholar]
- R. Dachowski, Z. Owsiak, Advanced Materials Research, 250-253 (2011) [Google Scholar]
- J. M. Cren, J. R. L. Dyczek, H. F. W. Taylor, Cement Concrete Res. 2 (1972) [Google Scholar]
- R. Dachowski, A. StĘpień, Procedia Engineering, 21 (2011) [Google Scholar]
- P. GĘbarowski, K. Łaskawiec, M. Skoroniewska, Influence autoclaving on the properties of silicate materials Scienific Works of Institute of Ceramics and Building Materials, 20 (2015) [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.