Open Access
Issue
MATEC Web Conf.
Volume 167, 2018
2018 3rd International Conference on Mechanical, Manufacturing, Modeling and Mechatronics (IC4M 2018) – 2018 3rd International Conference on Design, Engineering and Science (ICDES 2018)
Article Number 02010
Number of page(s) 6
Section Mechanical and Manufacturing Engineering
DOI https://doi.org/10.1051/matecconf/201816702010
Published online 23 April 2018
  1. A.R. Riahi and A.T. Alpas, Wear, 251 p 1396-1407 (2001) [CrossRef] [Google Scholar]
  2. S. Mohan, J.P. Pathak, R.C. Gupta, and S. Srivastava, Z. Metallkd, 93(12) p 1245-1251 (2002) [CrossRef] [Google Scholar]
  3. S. Das, S.V. Prasad, and T.R. Ramachandran, Wear, 133 p 173-187 1(989) [CrossRef] [Google Scholar]
  4. N. Ch. Kaushik, R. N. Rao, Trib. Inter.l, 103 298-308 (2016) [CrossRef] [Google Scholar]
  5. V. M. Ravindranath, M. Yerriswamy, S. V. Vivek, G. S Shiva Shankar, N. G Siddesh Kumar, Mat. Tod.: Proc., 4 9898-9901(2017) [CrossRef] [Google Scholar]
  6. M. Uthayakumar, S. Aravindan, K. Rajkumar, Mat.and Des., 47 456-464 (2013) [CrossRef] [Google Scholar]
  7. T. Lokesh, U. S. Mallik, Mat. Tod.: Proc.s, 4 11175-11180 (2017) [CrossRef] [Google Scholar]
  8. Y. H. Çelik, K. Seçilmiş, Adv. Pow.Tech., 28 2218-2224 (2017) [CrossRef] [Google Scholar]
  9. S. Thirumalai Kumaran, M. Uthayakumar, Pro. of the Ins. of Mech. Eng., Part J: J. of Eng. Trib. 2014 228: 332 originally published online 18 October 2013 DOI: 10.1177/1350650113508103 [CrossRef] [Google Scholar]
  10. R.L. Deuis, C. Subramanian, and J.M. Yellup, Wear, 201 p 132-144 (1996) [CrossRef] [Google Scholar]
  11. J. Goni, Mater. Sci. Technol., 16 p 743-746 (2000) [CrossRef] [Google Scholar]
  12. G.J. Howell and A. Ball, Wear, 181-183 p 379-390 (1995) [CrossRef] [Google Scholar]
  13. A.R. Riahi and A.T. Alpas, Wear, 251 p 1396-1407 (2001) [CrossRef] [Google Scholar]
  14. S.K. Rhee, SAE Trans., paper 740415, (1974) [Google Scholar]
  15. P.K. Rohatgi, S. Ray, and Y. Liu, Int. Mat. Rev., 37 p 129-149 (1992) [CrossRef] [Google Scholar]
  16. B. Venkataraman and G. Sundararajan, Wear, 245 p 22-38 (2000) [CrossRef] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.