Open Access
Issue
MATEC Web Conf.
Volume 165, 2018
12th International Fatigue Congress (FATIGUE 2018)
Article Number 21002
Number of page(s) 5
Section Welding
DOI https://doi.org/10.1051/matecconf/201816521002
Published online 25 May 2018
  1. Santos, D.; Vasconcelos, G.; Abdalla, A. J.; Lima, M. S.F.; Souza Neto, F.; Surface Characterization in a 300 M Bainitic Steel Laser Carburizing. ScienceDirect.Proc. Engin. 114 [2015] 322–329. [Google Scholar]
  2. Cardoso, A.S.M.; Abdalla, A.J.; Baptista, A.C.R.; Lima, M.S.F. Comparison of High Cycle Fatigue in 4340 and 300M Steels Welded with Fiber Laser. Advanced Mat. Research Vols. 891-892 [2014] pp 1507-1512. [Google Scholar]
  3. Yoozbashi, M.N.;Yazdani, S.; Wang, T.S. Design of a new nanostructured, high-Si bainitic steel with lower cost production. Mat. and Design, v.32 [2011] p.3248-3253. [CrossRef] [Google Scholar]
  4. Caballero, A.; Vuorinen, E.; Sundin, K.G.; Prakash, B.; Sourmail, T.; Smanio, V.; Caballero, F.G.; Garcia-Mateo, C.; Elvira, R. Wear of nanostructured carbidefree bainitic steels under dry rolling–sliding conditions. Wear, v.298–299 [2013] p.42–47. [Google Scholar]
  5. Yoozbashi, M. N.; Yazdani, S.; Wang, T. S. Design of a new nanostructured, high-Si bainitic steel with lower cost production. Materials and Design, Tabriz, v.32 [2011] p.3248-3253. [CrossRef] [Google Scholar]
  6. Zhu, K.; Oberbilling, C.; Musik, C.; Loison, D.; Iung, T. Effect of B and B + Nb on the bainitic transformation in low carbon steels. Materials Science and Engineering A, v.528 [2011] p.4222-4231. [CrossRef] [Google Scholar]
  7. Sirin, S.Y., Sirin, K., Kaluc, E., Materials Characterization 59 [2008] p. 351-358. [CrossRef] [Google Scholar]
  8. Lima, M.S.F. Lasers in Material Processing. In: Lackner, Lasers in Chemistry: Influencing Matter [2008] p.1195-1209. [Google Scholar]
  9. Scheid V. H. B., Abdalla A. J., Vasconcelo G., Effect of heating post-treatment on nitrided stainless steel. Surface and Coatings Technology, v.201 [2006] p. 4058-4061. [CrossRef] [Google Scholar]
  10. Reis,A.G.; Reis, D.A.P.; Abdalla, A.J.; Couto, A.A.; Otubo, J. Short-term Creep Properties and Fracture Surface of 18 Ni (300) Maraging Steel Plasma Nitrided. Materials Research, v.01 [2017] p.01-08. [Google Scholar]
  11. Ueda M.; Silva M.M.; Lepienski C.M.; Soares Jr. P. C.; Gonçalves J.A.N.; Reuther H. High temperature plasma immersion ion implantation of Ti6Al4V, Surface and Coatings Technology, v. 201 [2007] p. 4953-4956. [CrossRef] [Google Scholar]
  12. Ueda, M.; Silva, A.R.; Pillaca, E.J.D.M.; Mariano, S.F.M.; Rossi, J.O.; Oliveira, R.M.; Pichon, L.; Reuther, H. New possibilities of plasma immersion ion implantation (PIII) and deposition (PIII&D) in industrial components using metal tube fixtures. Surface & Coatings Technology, v. 312 [2017] p. 37-46. [CrossRef] [Google Scholar]
  13. Cunha, M.C.; Lima, M.S.F. The influence of laser surface treatment on the fatigue crack growth of AA 2024-T3 aluminum alloy alclad sheet. Surface & Coatings Technology, v. 329 [2017] p. 244-249. [CrossRef] [Google Scholar]
  14. Chagas, D. C.; Dias. A.N.; Antunes, E.F.; G. Vasconcelos. Aplicação de lubrificantes sólidos (negro de fumo) e tratamento térmico superficial de têmpera em matrizes de aço AISI 4340 via laser CO2, IV SICI-IEAv, vol.1 [2010] S.J.Campos, São Paulo, Brasil. [Google Scholar]
  15. Ganev, R.A. “Low-power laser hardening of steels”, Journal of Mat.Proc.Tech., v.121 [2002], p. 414-419. [CrossRef] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.