Open Access
Issue |
MATEC Web Conf.
Volume 154, 2018
The 2nd International Conference on Engineering and Technology for Sustainable Development (ICET4SD 2017)
|
|
---|---|---|
Article Number | 01108 | |
Number of page(s) | 4 | |
Section | Engineering and Technology | |
DOI | https://doi.org/10.1051/matecconf/201815401108 | |
Published online | 28 February 2018 |
- B. R. Munson, D. F. Young, and T. H. Okiishi, Fundamentals of Fluid Mechanics. John Wiley, (1998). [Google Scholar]
- V. Uruba, P. Jonáš, and O. Mazur, “Control of a channel-flow behind a backward-facing step by suction/blowing,” Int. J. Heat Fluid Flow, vol. 28, no. 4, pp. 665–672, (2007). [CrossRef] [Google Scholar]
- S. Chaligné, T. Castelain, M. Michard, and D. Juvé, “Active control of the flow behind a two-dimensional bluff body in ground proximity,” Comptes Rendus Mécanique, vol. 341, no. 3, pp. 289–297, (2013). [CrossRef] [Google Scholar]
- M. Sano, I. Suzuki, and K. Sakuraba, “Control of turbulent channel flow over a backward-facing step by suction,” J. fluid Sci. Technol., vol. 4, no. 1, pp. 188–199, (2009). [CrossRef] [Google Scholar]
- J. Rajasekaran, “On the flow characteristics behind a backward-facing step and the design of a new axisymmetric model for their study.” University of Toronto, (2011). [Google Scholar]
- A. S. Monin, “Coherent structure definition,” in Akademiia Nauk SSSR Doklady, vol. 318, pp. 853–856, (1991). [Google Scholar]
- S. C. C. Bailey, R. J. Martinuzzi, and G. A. Kopp, “The effects of wall proximity on vortex shedding from a square cylinder: three-dimensional effects,” Phys. Fluids, vol. 14, no. 12, pp. 4160–4177, (2002). [CrossRef] [Google Scholar]
- K.-B. Chun and H. J. Sung, “Control of turbulent separated flow over a backward-facing step by local forcing,” Exp. Fluids, vol. 21, no. 6, pp. 417–426, (1996). [CrossRef] [Google Scholar]
- T. C. Corke, C. L. Enloe, and S. P. Wilkinson, “Dielectric barrier discharge plasma actuators for flow control*,” Annu. Rev. Fluid Mech., vol. 42, pp. 505–529, (2010). [CrossRef] [Google Scholar]
- G. Nati, M. Kotsonis, S. Ghaemi, and F. Scarano, “Control of vortex shedding from a blunt trailing edge using plasma actuators,” Exp. Therm. Fluid Sci., vol. 46, pp. 199–210, (2013). [CrossRef] [Google Scholar]
- S. G. Pouryoussefi, M. Mirzaei, and M. Hajipour, “Experimental study of separation bubble control behind a backward-facing step using plasma actuators,” Acta Mech., vol. 226, no. 4, pp. 1153–1165, (2015). [CrossRef] [Google Scholar]
- G. Schewe, “Reynolds Number Effects in Flow Around a Rectangular Cylinder With Aspect Ratio 1: 5,” in Proceedings of the Fifth European and African Conference on Wind Engineering, Florence, Italy, (2009). [Google Scholar]
- Harinaldi, Budiarso, and J. Julian, “The effect of plasma actuator on the depreciation of the aerodynamic drag on box model,” in AIP Conference Proceedings, vol. 1737, no. 1, p. 40004, (2016). [CrossRef] [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.