Open Access
| Issue |
MATEC Web of Conferences
Volume 150, 2018
Malaysia Technical Universities Conference on Engineering and Technology (MUCET 2017)
|
|
|---|---|---|
| Article Number | 01017 | |
| Number of page(s) | 6 | |
| Section | Electrical & Electronic | |
| DOI | https://doi.org/10.1051/matecconf/201815001017 | |
| Published online | 23 February 2018 | |
- P. Leader and M. V Venkatasubramanian, “Coordination of Transmission Line Transfer Capabilities,” 1996. [Google Scholar]
- H. B. Harrison, “Transmission Line,” no. May, pp. 111–113, 1982. [Google Scholar]
- D. Ritzmann, P. S. Wright, W. Holderbaum, and B. Potter, “A Method for Accurate Transmission Line Impedance Parameter Estimation,” IEEE Trans. Instrum. Meas., vol. 65, no. 10, pp. 2204–2213, 2016. [CrossRef] [Google Scholar]
- G. Chen and E. G. Friedman, “Effective Capacitance of RLC Loads for Estimating Short-Circuit Power,” pp. 2065–2068, 2006. [Google Scholar]
- S. Ma, Z. Bo, and A. Klimek, “The research on lumped parameter equivalent circuit of transmission line,” pp. 2–6, 2009. [Google Scholar]
- B. Curran, I. Ndip, and K. Lang, “A Comparison of Typical Surface Finishes on the High Frequency Performances of Transmission Lines in PCBs,” pp. 1–3, 2017. [Google Scholar]
- M. Larsson and C. Rehtanz, “Detection of Oscillations in Power Systems using Kalman Filtering Techniques,” pp. 183–188, 2013. [Google Scholar]
- A. Saikia and R. K. Mehta, “Power system static state estimation using Kalman filter algorithm,” 2016. [Google Scholar]
- G. Gede, “Introduction to Kalman Filtering,” Robotica, no. June, 2011. [Google Scholar]
- R. A. Wiltshire, G. Ledwich, S. Member, and P. O. Shea, “A Kalman Filtering Approach to Rapidly Detecting Modal Changes in Power Systems,” vol. 22, no. 4, pp. 1698–1706, 2007. [Google Scholar]
- K. Vadirajacharya and B. A. T. U. Lonere, “Kalman filter analysis in dynamic state of power system,” pp. 1170–1173, 2015. [Google Scholar]
- E. C. M. Costa and S. Kurokawa, “Estimation of transmission line parameters using multiple methods,” vol. 9, pp. 2617–2624, 2015. [Google Scholar]
- C. Mishra and V. A. Centeno, “Kalman-Filter Based Recursive Regression for Three-Phase Line Parameter Estimation using Synchrophasor Measurements,” 2015. [Google Scholar]
- S. Gajare, A. K. Pradhan, and V. Terzija, “A Method for Accurate Parameter Estimation of Series Compensated Transmission Lines Using Synchronized Data,” IEEE Trans. Power Syst., vol. 8950, no. c, pp. 1–1, 2017. [Google Scholar]
- M. A. Shicong, G. U. O. Jianbo, S. U. N. Huadong, and Y. U. Yongjin, “The comparison and analysis of lumped parameter equivalent circuits of transmission line,” 2011. [Google Scholar]
- A. R. J. Araújo, R. C. Silva, and S. Kurokawa, “Comparing Lumped and Distributed Parameters Models in,” pp. 1–5, 2014. [Google Scholar]
- G. Bishop and N. Carolina, “An Introduction to the Kalman Filter,” 2001. [Google Scholar]
- Ravish R. Singh, “Electrical Networks,” vol. 352, no. August, pp. 35–42, 2003. [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.