Open Access
Issue
MATEC Web Conf.
Volume 149, 2018
2nd International Congress on Materials & Structural Stability (CMSS-2017)
Article Number 01091
Number of page(s) 6
Section Session 1 : Materials & Pathologies
DOI https://doi.org/10.1051/matecconf/201814901091
Published online 14 February 2018
  1. Y. Ohama, Hand book of polymer-modified concrete and mortars, properties and process technology. Noyes Publications, USA, (1995).
  2. J. Baron, J.P. Olivier, Les Bétons Bases et Formulations. Association de l’industrie des liants hydrauliques, 2ème Edition Eyrolles, (1997).
  3. S. Chandra, Y. Ohama, Polymers in Concrete, CRC Press, Boca Raton, p 204, (1994).
  4. E. Sakai, J. Sugita, Cem. Concr. Res. 25 [1] 127 (1995). [CrossRef]
  5. Y. Senhadji, G. Escadeillas, H. Khelafi, M. Mouli, A.S. Benosman, Eur. J. Environ. Civ. En. 16(1), 77 (2012). [CrossRef]
  6. J. Baron, J.P. Ollivier, La durabilité des Bétons. Presses de l’école nationale des ponts et chaussées, Paris, (1992).
  7. Y. Senhadji, G. Escadeillas, M. Mouli, H. Khelafi, A.S. Benosman, Powder Technol. 254, 314 (2014). [CrossRef]
  8. M. Ghrici, S. Kenai, M. Said-Mansour, E-H. Kadri, J. Asian Archit. Build. Eng. 5(2), 349 (2006). [CrossRef]
  9. Y. Benali, F. Ghomari, J. Adhes. Sci. Technol. 31(3), 219 (2017). [CrossRef]
  10. B. Belbachir, A.S. Benosman, H. Taïbi, M. Mouli, Y. Senhadji, M. Belbachir. J. Mater. Environ. Sci. JMES, 7(2), 402 (2016).
  11. Shaikh F.U. Ahmed, J. Mater. Civ. Eng. ASCE, 23(n°9), 1311 (2011). [CrossRef]
  12. N. Latroch, A.S. Benosman, N. Bouhamou, B. Belbachir, Y. Senhadji, H. Taïbi, M. Mouli, Int. J. Eng. Res. in Africa JERA, 27, 27 (2016). [CrossRef]
  13. NF P 15-403. - Technique des essais. - Sable normal et mortier normal (homologuée le 31 juillet 1963) (1963).
  14. EN 196-1, Methods of testing cement - Part 1: determination of strength. European Committee for Standardization, CEN, (2005).
  15. ASTM C267-01, Standard Test Methods for chemical resistance of mortars, grouts, and monolithic surfacing and polymer concretes, Annual Book of ASTM Standards, (2012).
  16. D. Achoura, Ch. Lanos, R. Jauberthie, B. Redjel, J. de Phys. IV France, EDP Sciences, 118, 159 (2004). [CrossRef]
  17. A.S. Benosman, M. Mouli, H. Taibi, M. Belbachir, Y. Senhadji, I. Bahlouli, D. Houivet, Environ. Eng. Manage. J., (EEMJ), 16(7), 1489 (2017).
  18. M. Omrane, M. Mouli, A.S. Benosman, Y. Senhadji, Adv. Mater. Res. J., 1064, 3 (2015). [CrossRef]
  19. B. Belbachir, A.S. Benosman, H. Taïbi, Key Eng. Mater. KEM, 678, 123 (2016). [CrossRef]
  20. J.A. Rossignolo, M.V.C. Agnesini, Cem. Concr. Compos. 26, 375 (2004). [CrossRef]
  21. J. Monteny, N. De Belie, E. Vincke, W. Verstraete, L. Taerwe, Cem. Concr. Res. 31, 1359 (2001). [CrossRef]
  22. V. Pavlik, S. Uncik, Cem. Concr. Res. 28(6), 936, (1998).
  23. Foil A. Miller, Charles H. Wilkins, Infrared Spectra and Characteristic Frequencies of Inorganic Ions; Their Use in Qualitative Analysis. Analytical Chemistry, 24, No. 8 (1952).

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.