Open Access
MATEC Web Conf.
Volume 149, 2018
2nd International Congress on Materials & Structural Stability (CMSS-2017)
Article Number 01003
Number of page(s) 6
Section Session 1 : Materials & Pathologies
Published online 14 February 2018
  1. M.A.G. Aranda, A.G. De la Torre, 18 – Sulfoaluminate cement, in: Eco-Efficient Concr., 2013: pp. 488–522. doi:10.1533/9780857098993.4.488. [CrossRef] [Google Scholar]
  2. A. Cuesta, A.G. De La Torre, E.R. Losilla, V.K. Peterson, P. Rejmak, A. Ayuela, C. Frontera, M.A.G. Aranda, Structure, atomistic simulations, and phase transition of stoichiometric yeelimite, Chem. Mater. 25 (2013) 1680–1687. doi:10.1021/cm400129z. [CrossRef] [Google Scholar]
  3. A. Cuesta, Á.G. De La Torre, E.R. Losilla, I. Santacruz, M.A.G. Aranda, Pseudocubic crystal structure and phase transition in doped ye’elimite, Cryst. Growth Des. 14 (2014) 5158–5163. doi:10.1021/cg501290q. [CrossRef] [Google Scholar]
  4. G.S. Li, E. Gartner, High-belite sulfoaluminate clinker: fabrication process and binder preparation, French patent application 04-51586 (publication 2873366), 2006. [Google Scholar]
  5. A.J.M. Cuberos, A.G. De La Torre, G. Alvarez-Pinazo, M.C. Martín-Sedeño, K. Schollbach, H. Pöllmann, M.A.G. Aranda, Active iron-rich belite sulfoaluminate cements: clinkering and hydration., Environ. Sci. Technol. 44 (2010) 6855–6862. [CrossRef] [Google Scholar]
  6. G. Álvarez-Pinazo, I. Santacruz, L. León-Reina, M.A.G. Aranda, A.G. De la Torre, Hydration Reactions and Mechanical Strength Developments of Iron-Rich Sulfobelite Ecocements, Ind. Eng. Chem. Res. 52 (2013) 16606–16614. doi:10.1021/ie402484e. [CrossRef] [Google Scholar]
  7. N. Chitvoranund, B. Lothenbach, F. Winnefeld, C.W. Hargis, Synthesis and hydration of alitecalcium sulfoaluminate cement, Adv. Cem. Res. (2016). [Google Scholar]
  8. Y. Hu, S. Ma, W. Li, X. Shen, The Preparation and Composition Analysis of Alite-Ye’Elimite With Industrial Wastes, Ceram. - Silikaty. 60 (2016) 1–10. doi:10.13168/cs.2016.0027. [Google Scholar]
  9. S. Ma, R. Snellings, X. Li, X. Shen, K.L. Scrivener, Alite-ye’elimite cement: Synthesis and mineralogical analysis, Cem. Concr. Res. 45 (2013) 15–20. doi:10.1016/j.cemconres.2012.10.020. [CrossRef] [Google Scholar]
  10. F. Winnefeld, S. Barlag, Calorimetric and thermogravimetric study on the influence of calcium sulfate on the hydration of ye ’ elimite, J. Therm. Anal. Calorim. 101 (2010) 949–957. doi:10.1007/s10973-009-0582-6. [CrossRef] [Google Scholar]
  11. F. Song, Z. Yu, F. Yang, Y. Lu, Y. Liu, Microstructure of amorphous aluminum hydroxide in belite-calcium sulfoaluminate cement, Cem. Concr. Res. 71 (2015) 1–6. doi:10.1016/j.cemconres.2015.01.013. [CrossRef] [Google Scholar]
  12. A. Telesca, M. Marroccoli, M.L. Pace, M. Tomasulo, G.L. Valenti, P.J.M. Monteiro, A hydration study of various calcium sulfoaluminate cements, Cem. Concr. Compos. 53 (2014) 224–232. doi:10.1016/j.cemconcomp.2014.07.002. [CrossRef] [Google Scholar]
  13. K. Scrivener, R. Snellings, B. Lothenbach, A Practical Guide to Microstructural Analysis of Cementitious Materials, CRC Press, Boca Raton, FL, 2016. [Google Scholar]
  14. B. Lothenbach, K. Scrivener, R.D. Hooton, Supplementary cementitious materials, Cem. Concr. Res. 41 (2011) 1244–1256. doi:10.1016/j.cemconres.2010.12.001. [CrossRef] [Google Scholar]
  15. I. Mehdipour, A. Kumar, K.H. Khayat, Rheology, hydration, and strength evolution of interground limestone cement containing PCE dispersant and high volume supplementary cementitious materials, Mater. Des. 127 (2017) 54–66. doi:10.1016/j.matdes.2017.04.061. [CrossRef] [Google Scholar]
  16. Á.G. De La Torre, A.J.M. Cuberos, G. Álvarez-Pinazo, A. Cuesta, M.A.G. Aranda, In situ powder diffraction study of belite sulfoaluminate clinkering, J. Synchrotron Radiat. 18 (2011) 506–514. [CrossRef] [Google Scholar]
  17. D. Londono-Zuluaga, J.I. Tobon, M.A.G. Aranda, I. Santacruz, A.G. De La Torre, Clinkering and hydration of Belite-Alite-Ye´elimite cement, Cem. Concr. Compos. 80 (2017) 333–341. doi:10.1016/j.cemconcomp.2017.04.002. [CrossRef] [Google Scholar]
  18. G. Álvarez-pinazo, I. Santacruz, Hydration of belite – ye’elimite – ferrite cements with different calcium sulfate sources, Adv. Cem. Res. 28 (2016) 529–543. doi:10.1680/jadcr.16.00030. [CrossRef] [Google Scholar]
  19. M. García-Maté, A.G. De La Torre, L. León-Reina, E.R. Losilla, M.A.G. Aranda, I. Santacruz, Effect of calcium sulfate source on the hydration of calcium sulfoaluminate eco-cement, Cem. Concr. Compos. 55 (2015) 53–61. doi:10.1016/j.cemconcomp.2014.08.003. [CrossRef] [Google Scholar]
  20. M. García-Maté, D. Londono-Zuluaga, A.G. De la Torre, E.R. Losilla, A. Cabeza, M.A.G. Aranda, I. Santacruz, Tailored setting times with high compressive strengths in bassanite calcium sulfoaluminate eco-cements, Cem. Concr. Compos. 72 (2016) 39–47. doi:10.1016/j.cemconcomp.2016.05.021. [CrossRef] [Google Scholar]
  21. A. Cuesta, G. Álvarez-Pinazo, S.G. Sanfélix, I. Peral, M.A.G. Aranda, A.G. De la Torre, Hydration mechanisms of two polymorphs of synthetic ye’elimite, Cem. Concr. Res. 63 (2014) 127–136. doi:10.1016/j.cemconres.2014.05.010. [CrossRef] [Google Scholar]
  22. A. Cuesta, R.U. Ichikawa, D. Londono-Zuluaga, A.G. De la Torre, I. Santacruz, X. Turrillas, M.A.G. Aranda, Aluminum hydroxide gel characterization within a calcium aluminate cement paste by combined Pair Distribution Function and Rietveld analyses, Cem. Concr. Res. 96 (2017) 1–12. doi:10.1016/j.cemconres.2017.02.025. [CrossRef] [Google Scholar]
  23. A. Cuesta, A.G. De la Torre, I. Santacruz, P. Trtik, J.C. da Silva, A. Diaz, M. Holler, M.A.G. Aranda, Chemistry and Mass Density of Aluminum Hydroxide Gel in Eco-Cements by Ptychographic X-ray Computed Tomography, J. Phys. Chem. C. 121 (2017) 3044–3054. doi:10.1021/acs.jpcc.6b10048. [CrossRef] [Google Scholar]
  24. A. Cuesta, I. Santacruz, S.G. Sanfélix, F. Fauth, M.A.G. Aranda, A.G. De la Torre, Hydration of C4AF in the presence of other phases: A synchrotron X-ray powder diffraction study, Constr. Build. Mater. 101 (2015) 818–827. doi:10.1016/j.conbuildmat.2015.10.114. [CrossRef] [Google Scholar]
  25. A. Cuesta, E.R. Losilla, M.A.G. Aranda, J. Sanz, Á.G. De La Torre, Reactive belite stabilization mechanisms by boron-bearing dopants, Cem. Concr. Res. 42 (2012) 598–606. [CrossRef] [Google Scholar]
  26. A. Cuesta, M.A.G. Aranda, J. Sanz, Á.G. de la Torre, E.R. Losilla, R. Kastanet, L. Leün-Reina, M.A.G. Aranda, Mechanism of stabilization of dicalcium silicate solid solution with aluminium, Dalt. Trans. 43 (2014) 2176–2182. doi:10.1039/C3DT52194J. [CrossRef] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.