Open Access
MATEC Web Conf.
Volume 145, 2018
NCTAM 2017 – 13th National Congress on Theoretical and Applied Mechanics
Article Number 02004
Number of page(s) 9
Section Solid Mechanics
Published online 09 January 2018
  1. A.P. Mouritz, Introduction to aerospace materials, Woodhead Publishing, 303-337 (2012) [Google Scholar]
  2. R.J.H. Wanhill, Aerospace Materials and Material Technologies : Aerospace Materials, 1, Springer (2017) [Google Scholar]
  3. P.K. Mallick, Fiber-reinforced composites: Materials, manufacturing and design, CRC Press, 19 - 48 (2007) [Google Scholar]
  4. M.R. Legault, (2011) [Google Scholar]
  5. UH-60 A/L/M CRASHWORTHY EXTERNAL FUEL SYSTEM (CEFS) Brochure, [Google Scholar]
  6. M. Ren, X. Chang, H.Y. Xu, T. Li, Compos Struct, 160, 1339-1347 (2017) [CrossRef] [Google Scholar]
  7. E. Elkhershi, The Telegraph, (2015) [Google Scholar]
  8. MIL-T-7378A. Military specification Tanks, Fuel, Aircraft, external, Auxiliary, Removable (1958) [Google Scholar]
  9. MIL-DLT-5578D. Detail Specification Tanks, Fuel, Aircraft, Self-sealing (2008) [Google Scholar]
  10. B. Wei, H. Cao, S. Song, Corros Sci, 53, 426-431 (2011) [Google Scholar]
  11. S. Lampman, Characterization and Failure Analysis of Plastics, ASM International, 146-152 (2003) [Google Scholar]
  12. J.A. Hinkley, J.W. Connell, Long-Term Durability of Polymeric Matrix Composites, Springer, 1-38 (2012) [Google Scholar]
  13. MIL-HDBK-17-1F. Composite Materials Handbook, Polimeric Matrix Composites Guidelines for Characterization of Structural Materials, 1, (2002) [Google Scholar]
  14. B.C. Ray, J. Reinf. Plast. Compos., 25, (2016), pp. 1227-1240 [CrossRef] [Google Scholar]
  15. P. Vaddadi, T. Nakamura, R.P. Singh, Acta Mater, 51, (2013), pp. 177-193 [CrossRef] [Google Scholar]
  16. B.G. Kumar, R.P. Singh, T. Nakamura, J. Compos. Mater., 36, (2002), pp. 2713-2733 [CrossRef] [Google Scholar]
  17. S. Roy, Long-Term Durability of Polymeric Matrix Composites, Springer, (2012), pp. 181 - 236 [CrossRef] [Google Scholar]
  18. I. Merdas, F. Thominette, A. TCharkhtchi, J. Verdu, Compos. Sci. Technol., 62, (2002), pp. 487-492 [CrossRef] [Google Scholar]
  19. E. Perez-Pacheco, J.I. Cauich – Cupul, A. Valadez-Gonzalez, P.J. Herrera-Franco, J. Mater. Sci, 48, (2013), pp. 1873-1882, [CrossRef] [Google Scholar]
  20. C.E. Browning, C.E. Husman, J.M. Whitney, Moisture effects in epoxy matrix composites, Interim Report AFML-TR-77-171976, (1976) [Google Scholar]
  21. J.M. Augl, The effect of moisture on carbon fibre reinforced epoxy composite - Mechanical property changes, Technical Report, Naval Surface Weapons Center, White Oak Laboratory, Maryland, USA, (1977) [Google Scholar]
  22. A.M. Visco, N. Campo, P. Cianciafara, Compos. Part A-Appl S, 42, (2011), pp. 123-130 [CrossRef] [EDP Sciences] [Google Scholar]
  23. P. Krishnan, M.S. Abdul Majid, M. Afendi, S. Yaacob, A.G. Gibson, Compos. Struct., 148, (2016), pp. 1-11 [CrossRef] [Google Scholar]
  24. A. Chilali, W. Zouari, M. Assarar, H. Kebir, R. Ayad, Compos. Struct., Article in press, (2017) [Google Scholar]
  25. V. Fiore, L. Calabrese, G. DI Bella, T. Scalici, G. Galtieri, A. Valenza, E. Proverbio, Compos. Part B-Eng., 93, (2016), pp. 35-42 [CrossRef] [Google Scholar]
  26. A.P.C. Barbosa, A.P.P. Fulco, E.S.S. Guerra, F.K. Arakaki, M. Tosatto, M.C.B. Costa, J.D.D Melo, Compos Part B-Eng., 110, (2017), pp. 298-306 [CrossRef] [Google Scholar]
  27. J. Naveen, T.P. Sathish Kumar, S. Satheesh Kumar, 3, (2014), pp. 1091-1095 [Google Scholar]
  28. L. Roy Xu, A. Krishnan, H. Ning, U. Vaidya, Compos Part B-Eng, 43, (2012), pp. 2480-2486 [CrossRef] [Google Scholar]
  29. L.R. de Souza, A.T. marques, J.R.M. D’Almeida, Compos Struct, 168, (2017), pp. 285-291 [CrossRef] [Google Scholar]
  30. S.R. Areef, Eng. & Technology, 26, (2008), pp. 1235-1239 [Google Scholar]
  31. D.B. Curliss, The effect of Jet fuel exposure on advanced aerospace composites I: Thermal and Chemical Analysis, Report, Materials Directorate, Wright Laboratory, Air Force System Command, Wright-Patterson Air Force Base, Ohio, USA, (1991) [Google Scholar]
  32. S.G. Taghavi, Moisture effects on high performance Polymer Composites, Master Thesis, Department of Chemical Engineering and Applied Chemistry, University of Toronto, 2000 [Google Scholar]
  33. SR EN ISO:527-4/2000 Plastics – Determination of tensile properties-Part 4: Test conditions for isotropic and orthotropic fibre-reinforced plastic composites [Google Scholar]
  34. ASTM D3039/D 3039M/2000 Standard Test Method for Tensile Properties of Polymer Matrix Composite Materials [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.