EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 135 (2017) MATEC Web Conf., 135 (2017) 00038 References
Open Access
Issue
MATEC Web Conf.
Volume 135, 2017
8th International Conference on Mechanical and Manufacturing Engineering 2017 (ICME’17)
Article Number 00038
Number of page(s) 11
DOI https://doi.org/10.1051/matecconf/201713500038
Published online 20 November 2017
  1. X. Kong, T. Barriere, and, J.C.C. Gelin, “Determination of critical and optimal powder loadings for 316L fine stainless steel feedstocks for micro-powder injection molding” J. Mater. Process. Technol, Vol. 212, No 11, pp. 2173–2182, Nov. 2012. [CrossRef] [Google Scholar]
  2. H. Abolhasani and, N. Muhamad, “A new starch-based binder for metal injection molding” J. Mater. Process. Technol, Vol. 210, No 6–7, pp. 961–968, 2010. [CrossRef] [Google Scholar]
  3. S. Ahn, S. Jin, S. Lee, S. V. Atre, R. M. German, S. J. Park, S. Lee, S. V. Atre, R. M. German, S. Jin, S. Lee, S. V. Atre, and R. M. German, “Effect of powders and binders on material properties and molding parameters in iron and stainless steel powder injection molding process” Powder Technol, Vol. 193, No 2, pp. 162–169, Jul. 2009. [CrossRef] [Google Scholar]
  4. M.A., Omar, I. Subuki, N. Abdullah, and M. F. Ismail, “The Influence Of Palm Stearin Content On The Rheological Behaviour Of 316L Stainless Steel Mim Compact” J. Sci. Technol, Vol. 2, No 2, pp. 1–14, 2010. [EDP Sciences] [Google Scholar]
  5. A.M., Amin, M.H.I. Ibrahim, R. Asmawi and, N.Mustafa, “The Influence of Sewage fat Composition on Rheological Bahavior of Metal Injection Moulding” Appl. Mech. Mater, Vol. 660, pp. 38–42, 2014. [CrossRef] [Google Scholar]
  6. R. Supati, N.H. Loh, K.A. Khor, and, S.B. Tor, “Mixing and characterization of feedstock for powder injection molding” Mater. Lett, Vol. 46, No 2–3, pp. 109–114, 2000. [CrossRef] [Google Scholar]
  7. C.H., Ji, N.H. Loh, K.A. Khor, and, S.B. Tor, “Sintering study of 316L stainless steel metal injection molding parts using Taguchi method: Final density” Mater. Sci. Eng. A, Vol. 311, No 1–2, pp. 74–82, 2001. [CrossRef] [Google Scholar]
  8. D.F., Heaney, T.W. Mueller, and, P.a.Davies, “Mechanical properties of metal injection moulded 316L stainless steel using both prealloy and master alloy techniques” Powder Metall, Vol. 47, No 4, pp. 367–373, 2004. [CrossRef] [Google Scholar]
  9. A.O. Yakimov and, T.W. Coyle, “A statistical analysis of the factors affecting thermal debinding” Mater. Sci. Lett, Vol. 19, pp. 2255–2257, 2000. [CrossRef] [Google Scholar]
  10. H. Jorge, L. Hennetier, A. Correia, and A. Cunha, “Tailoring Solvent / Thermal Debinding 316L Stainless Steel Feedstocks for PIM : An Experimental Approach” Euro PM2005, pp. 351–357, 2005. [Google Scholar]
  11. N.H. Loh and, R.M.German, “Statistical analysis of shrinkage variation for powder injection molding” J. Mater. Process. Technol, Vol. 59, No 3 SPEC. ISS., pp. 278–284, 1996. [CrossRef] [Google Scholar]
  12. S. Butković, M. Oruč, E. Šarić, and M. Mehmedović, “Effect of sintering parameters on the density, microstructure and mechanical properties of the niobium-modified heat-resistant stainless steel GX40CrNiSi25-20 produced by MIM technology” Mater. Tehnol, Vol. 46, No 2, pp. 185–190, 2012. [Google Scholar]
  13. Sidambe, A.T. Figueroa, I.A. H.G.C. Hamilton and, I. Todd, “Metal injection moulding of CP-Ti components for biomedical applications” J. Mater. Process. Technol, Vol. 212, No 7, pp. 1591⌁1597, 2012. [CrossRef] [Google Scholar]
  14. K. Lee, M.De Hoyos, S.Ahn, R. Nambiar, M. A. Gonzalez, S. Jin, and R. M. German, “Gas-assisted powder injection molding : A study on the effect of processing variables on gas penetration” Powder Technol, Vol. 200, No 3, pp. 128–135, 2010. [CrossRef] [Google Scholar]
  15. M. H.Ibrahim, “Optimization of MicroMetal Injection Moulding Parameter by Design of Experiment Method” Universiti Kebangsaan Malaysia, 2011. [Google Scholar]
  16. M.H.I. Ibrahim, N. Muhamad, A. B. Sulong, and K. R. Jamaludin, “Optimization of Micro Metal Injection Molding with Multiple Performance Characteristics using Grey Relational Grade” J. Sci, Vol. 38, No 2, pp. 231–241, 2011. [Google Scholar]
  17. M.I.H. Chua, A.B. Sulong M.F. Abdullah and, N. Muhamad, “Optimization of injection molding and solvent debinding parameters of stainless steel powder (SS316L) based feedstock for metal injection molding” Sains Malaysiana, Vol. 42, No 12, pp. 1743–1750, 2013. [Google Scholar]
  18. R.M. German and, A. Bose, Injection Molding of Metals and Ceramics. Metal powders Industries Federation, 1997. [Google Scholar]
  19. N. Mustafa, M.H.I. Ibrahim, R. Asmawi, A. M. Amin, and S. R. Masrol, “Green Strength Optimization in Metal Injection Molding applicable with a Taguchi Method L9 (3)^4” Appl. Mech. Mater, Vol. 773–774, pp. 115–117, 2015. [CrossRef] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.