Open Access
Issue
MATEC Web Conf.
Volume 135, 2017
8th International Conference on Mechanical and Manufacturing Engineering 2017 (ICME’17)
Article Number 00036
Number of page(s) 8
DOI https://doi.org/10.1051/matecconf/201713500036
Published online 20 November 2017
  1. C.K. Chua C. Feng, C. W. Lee, and G. Q. Ang, ‘Rapid investment casting: Direct and indirect approaches via model maker II’, Int. J. Adv. Manuf. Technol, Vol. 25, No 1–2,pp. 26–32, (2005) [CrossRef] [Google Scholar]
  2. Y. Ding, H. Lan, J. Hong, and D. Wu, ‘An integrated manufacturing system for rapid tooling based on rapid prototyping’, Vol. 20, pp. 281–288, (2004). [EDP Sciences] [Google Scholar]
  3. C.W. Lee C.K. Chua, C.M. Cheah, L. H. Tan, and C. Feng, ‘Rapid investment casting:Direct and indirect approaches via fused deposition modelling’, Int. J. Adv. Manuf.Technol, Vol. 23, No 1–2, pp. 93–101, (2004) [CrossRef] [Google Scholar]
  4. A. Azariand, S. Nikzad, ‘The evolution of rapid prototyping in dentistry: a review’, Rapid Prototyp. J, Vol. 15, No 3, pp. 216–225, (2009) [CrossRef] [Google Scholar]
  5. S. Jones, and C., Yuan, ‘Advances in shell moulding for investment casting’, J. Mater.Process. Technol, Vol. 135, No 2–3 SPEC., pp. 258–265, (2003) [CrossRef] [Google Scholar]
  6. W.L. Yao and, M.C.Leu, ‘Analysis of shell cracking in investment casting with laser stereolithography patterns’, Rapid Prototyp. J, Vol. 5, No 1, pp. 12–20, (1999) [CrossRef] [Google Scholar]
  7. W.L. Yao and, M.C.Leu, ‘Analysis and design of internal web structure of laser stereolithography patterns for investment casting’, Mater. Des, Vol. 21, No 2, pp. 101–109, (2000) [CrossRef] [Google Scholar]
  8. Y. Norouzi, S. Rahmati and, Y. Hojjat, ‘A novel lattice structure for SL investment casting patterns’, Rapid Prototyp. J, Vol. 15, No 4, pp. 255–263, (2009) [Google Scholar]
  9. O.M.F. Marwah, S. Sharif, S. Sulaiman, M. Ibrahim, and E. J. Mohamad, ‘Direct Investment Casting Numerical Study for ABS p400 FDM Materials’, Appl. Mech. Mater,vol. 660, pp. 99–103, (2014) [CrossRef] [Google Scholar]
  10. W.S.W. Harun, S. Safian, and M.H.Idris, ‘Evaluation of ABS patterns produced from FDM for investment casting process’, WIT Trans. Eng. Sci, Vol. 64, No 3, pp. 319–328,(2009) [CrossRef] [EDP Sciences] [Google Scholar]
  11. O. Mohd, F. Marwah, S. Sharif, and M. Ibrahim ‘Direct Fabrication of IC Sacrificial Patterns via Rapid Prototyping Approaches’, Vol. 6, No 5, (2012) [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.