Open Access
MATEC Web Conf.
Volume 135, 2017
8th International Conference on Mechanical and Manufacturing Engineering 2017 (ICME’17)
Article Number 00008
Number of page(s) 13
Published online 20 November 2017
  1. J. Choi, S. Mhetras, J. -C. Han, S. Lau et R. Rudolph, «Film Cooling and Heat Transfer on Two Cutback Trailing Edge Model with Internal Performance Blockages,» J. Heat Transfer, vol. 130, no.11, p. 012201, 2008. [CrossRef] [Google Scholar]
  2. J. -C. Han, «Fundamental Gas Turbine Heat Transfer,» J. Thermal Science and Engineering Applications, vol. 5, no.12, pp. 021007-1, 2013. [CrossRef] [Google Scholar]
  3. J. -C. Han et A. P. Rallabandi, «Tuibine Blade Film Cooling Using PSP Technique,» Frontier in Heat and Mass Transfer, vol. 1, p. 1–21, 2010. [Google Scholar]
  4. S.D. Holloway, J.H. Leylek et F.A. Buck, «Pressure-Side Bleed Film Cooling: Part I - Steady Framework For Experimental And Computational Results,» chez ASME paper No GT-2002-30471, 2002. [Google Scholar]
  5. P. Martini, A. SchulzC.F. Whitney et E. Lutum, «Experimental and Numerical Investigation of Trailing Edge Film Cooling Downstream of a Slot with Internal Rib Arrays,» chez Proc. Inst. Mech. Eng., Part A, 217 2003. [Google Scholar]
  6. M. Effendy, Y. Yao et J. Yao, «Comparison Study of Turbine Blade with Trailing-Edge Cutback Coolant Ejection Designs,» chez 51st AIAA Aerospace Sciences Meeting, Texas, 2013-0548, 2013. [Google Scholar]
  7. Y. Egorov, Menter, F.R. R. Lechner et D. Cokljat, «The Scale-Adaptive Simulation Method for Unsteady Turbulent Flow Predictions. Part 2: Application to Complex Flows,» J. Flow, Turbulence and Combustion, vol. 85, no.11, p. 139–165, 2010. [Google Scholar]
  8. G. Medic et P.A. Durbin, «Unsteady Effects on Trailing Edge Cooling,» J. Heat Transfer, vol. 127, no.14, p. 388–392, 2005. [CrossRef] [Google Scholar]
  9. J. Joo et P. Durbin, «Simulation of Turbine Blade Trailing Edge Cooling,» J. Fluids Engineering, vol. 131, no.12, pp. 021102-1-021102-14, 2009. [Google Scholar]
  10. P. Martini, A. Schulz, H. -J. Bauer et C. F. Whitney, «Detached Eddy Simulation of Film Cooling Performance on The Trailing Edge Cutback of Gas Turbine Airfoils,» J. Turbomachinery, vol. 128, no.12, p. 292–300, 2006. [CrossRef] [Google Scholar]
  11. J. Krueckels, M. Gritsch et M. Schnieder, «Design Consideration and Validation of Trailing Edge Pressure Side Bleed Cooling,» chez ASME Paper No. GT-2009-59161, 2009. [Google Scholar]
  12. K. Viswanathan, M. SchurP.R. Spalart et M. Strelets, «Flow and Noise Predictions for Single and Dual Stream Beveled Nozzles,» J. AIAA, vol. 46, no.13, p. 601–626, 2008. [CrossRef] [Google Scholar]
  13. H. Schneider, D. von Terzi et H. -J. Baurer, «Large-Eddy Simulations of Trailing-edge Cutback Film Cooling at Low Blowing Ratio,» J. Heat and Fluid Flow, vol. 31, no.15, p. 767–775, 2010. [CrossRef] [Google Scholar]
  14. H. Schneider, D. von Terzi et H. -J. Baurer, «Turbulent Heat Transfer and Large Coherent Structures in Trailing-Edge Cutback Film Cooling,» J. Flow, Turbulence and Combustion, vol. 88, no. 11-2, p. 101–120, 2012. [CrossRef] [Google Scholar]
  15. A. Viswanathan et D.K. Tafti, «Detached-Eddy Simulation of Flow and Heat Transfer in Fully Developed Rotating Internal Cooling Channel with Normal Ribs,» J. Heat and Fluid Flow, vol. 27, no.11, p. 351–370, 2006. [CrossRef] [Google Scholar]
  16. A. Viswanathan, K. Klismith, J. Forsythe et R. Squires, «Detached-Eddy Simulation around a Forbody at High Angle of Attack,» chez AIAA Paper No. 2003-263, vol 2003. [Google Scholar]
  17. A. Viswanathan et D.K. Tafti, «Detached-Eddy Simulation of Turbulent Flow and Heat Transfer in a Two-Pass Internal Cooling Duct,» J. Heat and Fluid Flow, vol. 27, no.11, p. 1–20, 2006. [CrossRef] [EDP Sciences] [Google Scholar]
  18. S.D. Holloway, J.H. Leylek et F.A. Buck, «Pressure-Side Bleed Film Cooling: Part II - UnSteady Framework For Experimental and Computational Results,» chez ASME paper No GT- 2002-30472, 2002. [Google Scholar]
  19. Y. Chen, C.G. Matalanis et J.K. Eaton, «High Resolution PIV Measurements around a Model Turbine Blade Trailing Edge Film Cooling Breakout,» J. Experiments in Fluids, vol. 44, no.12, p. 199–209, 2007. [CrossRef] [Google Scholar]
  20. P. Martini, A. Schulz et H. -J. Bauer, «Film Cooling Effectiveness and Heat Transfer on The Trailing Edge Cutback of Gas Turbine Airfoils with Various Internal Cooling Designs,» J. Turbomachinery, vol. 128, no.11, p. 196–206, 2006. [CrossRef] [Google Scholar]
  21. M. Effendy, Y. Yao, J. Yao et D.R. Marchant, «DES study of blade trailing edge cutback cooling performance with various lip-thicknesses,» J. Applied Thermal Engineering, vol. 99, pp. 434-445, 2016. [CrossRef] [Google Scholar]
  22. T. Nishino, G.T. Roberts et X. Zhang, «Unsteady RANS and Detached-eddy Simulations of Flow around a Circular Cylinder in Ground Effect,» J. Fluids and Structures, vol. 24, no.11, p. 18–33, 2008. [CrossRef] [Google Scholar]
  23. P.R. Spalart, «Young-Person’s Guide to Detached-Eddy Simulations Grids,», Boeing Commercial Airplane Group, Seattle, WA USA, 2001. [Google Scholar]
  24. P.R. Spalart, S. Deck, M. L. Shur, K. D. Squires, M. K. Strelets et A. Travin, «A New Version of Detached Eddy Simulation, Resistant to Ambiguous Grid Densities,» J. Theoretical and Computational Fluid Dynamics, vol. 20, no.13, p. 181–195, 2006. [NASA ADS] [CrossRef] [Google Scholar]
  25. F.R. Menter, M. Kuntz et R. Langtry, «Ten Years of Industrial Experience with the SST Turbulence Model,» Turbulence, Heat and Mass Transfer 4, edited by K. Hanjalic, Y. Nagano, and M. Tummers, Begell House, Inc p. 625–632, 2003. [Google Scholar]
  26. T. Horbach, A. Schulz et H.-J. Bauer, «Trailing Edge Film Cooling of Gas Turbine Airfoils - External Cooling Performance of Various Internal Pin Fin Configurations,» J. Turbomachinery, vol. 133, no.14, pp. 041006-1–041006-9, 2011. [CrossRef] [Google Scholar]
  27. C.H. Sieverding et H. Heinemann, «The Influence of Boundary Layer State on Vortex Shedding from Flat Plates and Turbines Cascades,» J. Turbomachinery, vol. 112, no.12, p. 181–187, 1990. [CrossRef] [Google Scholar]
  28. D. R. Boldman, P.F. Brinich et M.E. Goldstein, «Vortex Shedding from a Blunt Trailing Edge with Equal and Unequal External Mean Velocities,» J. Fluid Mechanics, vol. 75, no.14, p. 721–735, 1976. [CrossRef] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.